• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.835-842
• /
• 2001

We propose a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase. The time-dependent behavior of testing effort expenditures is described by a Weibull curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, we discuss the relations between testing time and reliability and between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through studying the cost for each condition. Also, the release time is determined depending on the conditions of the specified reliability. The optimum release time is determined by simultaneously studying optimum release time issue that determines both the cost related time and the specified reliability related time.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.347-355
• /
• 1997

It is well known that the coarse primary Si in hypereutectic Al-Si alloys deteriorate castability, machinability, and mechanical properties. So, many treatment has been tried to refine the primary Si increasing cooling rate and adding refinement agent. Therefore. the purpose of our work was the observation of the effect on the refinement of primary Si and the analysis of the trend to apply to the casting process by changing the amount of P addition and the cooling rate while fixing the temperature at $750^{\circ}C$ of P addition and the type of AlCuP. In the condition of amount of P addition was fixed, primary Si was finer as cooling rate increased but in case of cooling rate was fixed, the effect of refinement was resisted as incersed the amount of P addition. At a relatively slow cooling rate of $22^{\circ}C/sec$, refinement was governed by the amount of P addition rather than cooling rate. At elevated cooling rate of $51^{\circ}C/sec$ and $99^{\circ}C/sec$, the undercooling due to faster cooling rate promoted nucleation of primary Si rather than P addition more significantly.

• KIISE Transactions on Computing Practices
• /
• v.21 no.9
• /
• pp.616-621
• /
• 2015

Recently developed software systems have many components, and their complexity is thus increasing. Last year, about 375 bug reports in one day were reported to a software repository in Eclipse and Mozilla open source projects. With so many bug reports submitted, developers' time and efforts have increased unnecessarily. Since the bug severity is manually determined by quality assurance, project manager or other developers in the general bug fixing process, it is biased to them. They might also make a mistake on the manual decision because of the large number of bug reports. Therefore, in this study, we propose an approach of bug severity prediction to solve these problems. First, we find similar topics within a new bug report and reduce the candidate reports of the topic by using the meta field of the bug report. Next, we train the reduced reports by applying Naive Bayes Multinomial. Finally, we predict the severity of the new bug report. We compare our approach with other prediction algorithms by using bug reports in open source projects. The results show that our approach better predicts bug severity than other algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2008

The Logistic cone is studied as a most desirable for the software testing effort. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, This paper discusses the relations between testing time and reliability and between duration following failure fixing and reliability are studied SRGM in several literatures has used the exponential curve, Railleigh curve or Weibull cure as an amount of testing effort during software testing phase. However, it might not be appropriate to represent the consumption curve for testing effort by one of already proposed curves in some software development environments. Therefore, this paper shows that a logistic testing- effort function can be adequately expressed as a software development/testing effort curve and that it gives a good predictive capability based on real failure data.

• Journal of Navigation and Port Research
• /
• v.45 no.5
• /
• pp.238-251
• /
• 2021

It is understood that carriers evaluate several features of ports when fixing the T/S port. Those features can be enumerated as Geographic condition of port, Service network with overseas ports, Level of port productivity, Port infrastructure, Port services level, Port Authority's Policy direction mand Cost competitiveness. The objectives of this study are to: 1) determine if those factors could affect the T/S competitiveness of the port; and 2) to evaluate how Busan port conforms to those determinants factors in such extent. According to results of the analysis after surveying National global carrier, Intra-Asia carriers, Global overseas carriers, Terminal operators, and Busan Port Authority known to be highly influential samples, all factors were proven to be factors affecting the T/S competitiveness of the port. Meanwhile, in the analysis through AHP (Analytic Hierarchy Process) methodology about the order of weight among those factors, Cost competitiveness was answered as the most important factor. On the other hand, in the analysis to find the situation if Busan port conforms to those factors, Busan port was proven to satisfy those conditions to a moderate extent. In the analysis about the order of strength among those factors, Busan port was answered to have the highest strength in the geographic condition. However, it showed the bottom level of strength in the Cost competitiveness which was answered as the most important factor among samples for determining the T/S competitiveness of the port. This indicates that Government and Port Authority of Busan have to concentrate policy capabilities on the improvement of cost competitiveness of Busan port to enhance the T/S competitiveness. In this paper, four policy recommendations are given : Integration of Busan port operation into New port, Combining multiple operators into one or a few, Attracting Global mega carriers as the New port terminal operators, and Continuous Infrastructure expansion.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.207-213
• /
• 2023

Achievement systems have proliferated so quickly in gaming that it's hard to find a game that doesn't have them. However, their introduction has come with a number of drawbacks, including a lack of sense of accomplishment and immersion, and a lack of difficulty setting. There is a genre of achievement games that have managed to turn the downsides of achievement systems into unique features of their games, but they are dwindling in number. In this situation, we developed 'Achievement Run', an achievement game that can meet the needs of achievement enthusiasts by fixing the shortcomings of existing games. This paper introduces the development process of a new achievement game called 'Achievement Run' and conducts in-depth interviews with gamers to find out what kind of experience it provides, and concludes that the game's achievement system provides a generally positive player experience. Therefore, this paper will provide useful guidance not only for achievement-oriented game enthusiasts, but also for game development in general.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.24-32
• /
• 2024

Background: Learning from incidents for accident prevention is a two-stage process, involving the investigation of past accidents to identify the causal factors, followed by the identification and implementation of remedial measures to address the identified causal factors. The focus of past research has been on the identification of causal factors, with limited focus on the identification and implementation of remedial measures. This research begins to contribute to this gap. The motivation for the research is twofold. First, previous analyses show the recurring nature of accidents within the Ghanaian mining industry, and the causal factors also remain the same. This raises questions on the nature and effectiveness of remedial measures identified to address the causes of past accidents. Secondly, without identifying and implementing remedial measures, the full benefits of accident investigations will not be achieved. Hence, this study aims to assess the nature of remedial measures proposed to address investigation causal factors. Method: The study adopted SMARTER from business studies with the addition of HMW (H - Hierarchical, M - Mapping, and W - Weighting of causal factors) to analyse the recommendations from 500 individual investigation reports across seven different mines in Ghana. Results: The individual and the work environment (79%) were mostly the focused during the search for causes, with limited focus on organisational factors (21%). Forty eight percentage of the recommendations were administrative, focussing on fixing the problem in the immediate affected area or department of the victim(s). Most recommendations (70.4%) were support activities that only enhance the effectiveness of control but do not prevent/mitigate the failure directly. Across all the mines, there was no focus on evaluating the performance of remedial measures after their implementation. Conclusion: Identifying sharp-end causes leads to proposing weak recommendations which fail to address latent organisational conditions. The study proposed a guide for effective planning and implementation of remedial actions.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.

• Journal of the Korean Regional Science Association
• /
• v.6 no.1
• /
• pp.11-38
• /
• 1990

The purpose of this thesis is, first to present the spatial division of labor in Korea and its mechanism, and second, to elucidate the organic integral relation between local labor market and local community by studing the mechanism that the spatial division of labor is projected into the individual lacal labor marker, and reproduction of labor force process in this local labor market. According to this purpose, the theoretical frame of this analysis is done, the positive analysis is made and Kumi is choosed as its analysis case area. The main data is from 'Survey Report on Manufacturing Idustry Wage Conditions' published by Minimum Wage Council, Ministry of Labour and from the questionnaires and interview on textile industry and electric electronics industry firms in Kumi Export Industrial Estate. The following are the results of this study. 1. The mechanism of spatial division of labor in Korea, seen through the employment structure index, is accelerating the regional discrimination by fixing the regional hierarchisation between Seoul (or Seoul Metropolitan Area as expanded Seoul) and other areas. But it is also developing highly the regional employment structure at the level of technical division of labor, since the spatial division of labor in Korea is leaded by large firms and influenced by the policy for regional development. 2. Local labor market is formed in Kumi area and its delimitation is Kumi city. The employment structure of Kumi local labor market is occupying lower hierarchy division at management hierachical level and occupying upper hierarchy division at the level of technical division of labor, and brand plants of large firs are determinating and dominating this emplogment structure. These bdranch plants of large firs are forming more favorable and stabel labor marker than locally controlled ploants in Kumi local labor market. But the reproduction of labor force process in Kumi local labor market is not fully carried out and leaked into central city, therefore Kumi is now becoming an unstable local community, suffering from large movement of population. This is because Kumi local labor market is found not for itself, but by the state policy and externally controlled plants of large firms, and therefore no potentiality to control and to absorb the exterior influences is built in Kumi local labor market. 3. The case firms A, B have spatial division of labor between decision-making function and production function, and between upper management hierachical labor force and lower management hierachical labor force in internal labor market.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.3
• /
• pp.153-166
• /
• 1991

Laver is sea weeds that might have been eaten by Korean people since ancient times. The begining of laver culture is not known exactly, but it appears to be prehistoric age. Some laver culture complexes have been built in southern coastal sea of Korea around 1910. This paper was considered about the origin and development process of Korean laver culture industry by investigating Korean and Asian old books concerned. The results are as follows. 1. According to the Korean old books ralated, the name of laver is classified into 10kinds. Gim and Hae-I were called by Korean. Gim means weeds and Hae-I means the manufactured laver by cutting and drying like paper sheet. Ja-Chae and Hae-Tae are come from Chinese, however they are commonly called by Korean, Japanese and Chinese. Rest six names are come from Chinese botany. 2. As Chinese used laver as medicine for wen, scrofula, fever, vomiting, diarrhoea and. so on, they didn't regard it as foods and took into account an warning by Chinese botany that they could take ill when overeating it. On the other as Korean people have eaten it with pleasure nevertheless the Chinese warning, various foods using laver have been developed. The typical food is rice covering laver sheet. It is also popular to Japanese. 3. Laver culture can be carried out in all coastal seas around Korean peninsula, the best sea area for it is the middle west of south sea. 4. Seopkkoji type is a laver culture method that when branches of tree are put in tidal flat laver sporules are attached and gronm on them. It was begun by Hae-Jak Kun(a group of fishery slaves) on Kwang-Yang bay the most suitable for. laver growth at the beginning of King $Sung-long(1469{\~}1481)$. It is assumed that when Hae-Jak Kun set Oe-Jeon(a sort of fixing fishing gear) to catch tributary fish for king, they could find grown laver attached on Oe-Jeon and invent Seopkkoji type for exclusive laver culture. That was carried out 200 fears earlier than in Japan. Dde-Bal type is more advanced and productive laver culture method with thinly spilt bamboo tied like screen(one end fixed on bottom and other end set free in water), It is assumed that Dde-Bal type was begun in Wan-Do county in King Chull-Jong(1830). All laver culture methods developed were transfered to Japan.