• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.170-174
• /
• 1994

Stellate Ganglion (SG) of l0 cadavers were removed during autopsy at Saga Medical College. Length, width, thickness, shape and location of SG were measured before formalin fixation. The results are as follows; 1) Length, width, thickness of SG were 22.33+5.23mm, 9.34+2.23mm and 5.03+1.19mm in right respectively, and 29.67+10.56 mm, 11.29+3.20mm and 5.51+1.09mm respectively in left. 2) Weight of right SG is 0.69+0.25 gm and weight of left SG is 1.04+0.63 gm. 3) Shape of SG is oval and snowman type. 4) Location of SG is variably located from the base of 7th cervical vertebra to first thoracic vertebra.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• Clinics in Shoulder and Elbow
• /
• v.19 no.4
• /
• pp.223-228
• /
• 2016

Background: The aim of study was to confirm the clinical effectiveness and results of wide and single anterior approach for fractures occurring along length of humerus. Methods: A total of 23 patients with humeral fracture were enrolled into our study who were able to participate in at least one year of follow-up. Seven patients had segmental comminuted humeral fractures and 16 patients had distal humeral fractures. We made various tractions of the muscles to expose the proximal and the middle third humerus between the biceps and brachialis and the distal humerus by partial splitting of lateral side of biceps through a single incision. Postoperatively, we measured the Mayo elbow performance index (MEPI). Results: we achieved bone union in all 23 patients. Solid union of the bone was achieved at an average 13.9 weeks. Postoperatively, two complications were observed screw loosening and nonunion. Revision surgery was performed in both patients. The patient with bone nonunion was treated using bone grafts. No postoperative infections or peripheral neuropathies were observed. At the final follow-up (average 20 months), we found that the average MEPI functional score of the patients was 91.7 points regardless of the fracture site. Conclusions: Our whole humerus with a single incision was effective for the treatment of segmental comminuted and distal fractures. we believe it is a useful alternative to preexisting methods of fracture fixation.

• Journal of Trauma and Injury
• /
• v.35 no.3
• /
• pp.173-180
• /
• 2022

Purpose: The use of surgical stabilization of rib fractures (SSRF) has steadily increased over the past decade. Recent literature suggests that a larger population may benefit from SSRF, and that the geriatric population-as the highest-risk population-may receive the greatest improvement from these interventions. We sought to determine the overall utilization of SSRF in the United States. Methods: The National Trauma Database was analyzed between 2016 and 2017. The inclusion criteria were all patients ≥65 years old with rib fractures. We further stratified these patients according to age (65-79 vs. ≥80 years old), the presence of coding for flail chest, three or more rib fractures, and intervention (surgical vs. nonoperative management). The main outcomes were surgical interventions, mortality, pneumonia, length of stay, intensive care unit length of stay, ventilator use, and tracheostomy. Results: Overall, 93,638 patients were identified. SSRF was performed in 992 patients. Patients who underwent SSRF had improved mortality in the 65 to 79 age group, regardless of the number of ribs fractured. We identified 92,637 patients in the age group of 65 to 79 years old who did not undergo SSRF. This represents an additional 20,000 patients annually who may benefit from SSRF. Conclusions: By conservative standards and the well-established Eastern Association for the Surgery of Trauma clinical practice guidelines, SSRF is underutilized. Our data suggest that SSRF may be very beneficial for the geriatric population, specifically those aged 65 to 79 years with any rib fractures. We hypothesize that roughly 20,000 additional cases will meet the inclusion criteria for SSRF each year. It is therefore imperative that we train acute care surgeons in this skill set.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.3
• /
• pp.124-130
• /
• 2008

Objective : Our purpose of this study is to compare insertion angles and screw lengths from Roy-Camille, Magerl, and our designed method for cervical lateral mass screw fixation in the Korean population by quantitative measurement of reformatted two dimensional (2D) computed tomography (CT) images. Methods : We selected thirty Korean patients who were evaluated with thin section CT scans and reconstruction program to obtain reformatted 2D-CT images of the transversal plane passing the cranio-caudal angle using three different techniques. We measured the minimum angle to avoid vertebral artery (VA) injury, the ideal angle and depth for bicortical screwing of cervical lateral mass. Morphometric measurements of the lateral masses from C3-C7 were also taken. Results : In all three techniques, the mean safety angles from the VA were less than 8 degrees and the necessary depth of the screw was about 14 mm for safety to the VA and for the bicortical purchase. In our designed technique, the mean $\beta$ angles of each level from C3 to C7 were 29.0. 29.8. 29.5. 26.3. and 23.9 degrees, respectively. Conclusion : Results of this study and data from the literature indicate that differences may exist between the Korean and Western people in the length and angle for ideal lateral mass screw fixation. In addition, our technique needs further cadaveric and clinical study for safety and efficacy for being performed as alternative method for cervical lateral mass fixation.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.456-462
• /
• 2023

Plate fixation has become the preferred approach for treating displaced midshaft clavicle fractures. However, plate fixation of the clavicle presents several unique challenges, including its complex bony architecture and its immediate subcutaneous location. In many cases, we have observed that precontoured implants do not conform to the clavicular anatomy, and many patients complain of postoperative implant-related discomfort. A total of 111 clavicles, both left and right sides, were examined to match two commonly used designs of anatomical pre-contoured superior anterior clavicle plates, with and without lateral extension. The anteroposterior (AP) plane congruence of the plate to the underlying bone, the vertical gap between the bone and plate, and the length of the plate that was off the bone either anteriorly and/or posteriorly at both ends of the clavicle were measured. The scoring system was used to determine the fit of the implant on the clavicle as anatomic, good, or poor. We found that the maximum superior bow of the clavicle was lateral to the midline by 30.75 mm and 30.5 mm on the right and left sides, respectively. The magnitude of the bow was 4.28 mm and 4.46 mm on the right and left sides, respectively. We also found that the plate was a poor fit in 75.86% of cases on the left side and 73.5% of cases on the right side. Manipulating the plates during surgery was very difficult in the AP plane.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.144-154
• /
• 2024

Purpose: The objective of this study was to assess postoperative direct medical expenses and medical utilization of elderly patients who underwent either hemiarthroplasty (HA) or internal fixation (IF) for treatment of a femoral intertrochanteric fracture and to analyze differences according to surgical methods and age groups. Materials and Methods: Data from the 2011 to 2018 Korean National Health Insurance Review & Assessment Service database were used. Risk-set matching was performed for selection of controls representing patients with the same sex, age, and year of surgery. A comparative interrupted time series analysis was performed for evaluation of differences in medical expenses and utilization between the two groups. Results: A total of 10,405 patients who underwent IF surgery and 10,405 control patients who underwent HA surgery were included. Medical expenses were 18% lower in the IF group compared to the HA group during the first year after the fracture (difference-in-difference [DID] estimate ratio 0.82, 95% confidence interval [CI] 0.77-0.87, P<0.001), and 9% lower in the second year (DID estimate ratio 0.91, 95% CI 0.85-0.99, P=0.018). Length of hospital stay was significantly shorter in the IF group compared to the HA group during the first two years after time zero in the age ≥80 group. Conclusion: A noticeable increase in medical expenses was observed for patients who underwent HA for treatment of intertrochanteric fractures compared to those who underwent IF over a two-year period after surgery. Therefore, consideration of such findings is critical when designing healthcare policy support for management of intertrochanteric fractures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.348-357
• /
• 2000

The purpose of this study is to examine the effect of partial osseointegration situation on bone loading patterns around two different free-standing screw shaped implants (Nobel Biocare, Gothenburg, Sweden and Degussa-Huls, Hanau, German). Two dimensional axisymmetric Finite element models of two implants(10mm length and 4mm diameter) were created according to different bone quantity, quality and osseointegration ratio in maxilla and mandible bone. At the same time uni-cortical and hi-cortical fixation were analyzed. Generally, full bond case showed less stress than partial bond case in overall area and mandibular model showed less amount of stress than that of maxilla model. Maximum stress of the Branemark implant is higher than that of ANKYLOS regardless of bonding ratio at crestal and apex region. However, more stress concentration was noted in ANKYLOS implant at screw body area especially in mandible. The effect of bicortical fixation on crestal bone stress reduction is dramatical in mandible however, there was no significant effect in maxillary case. The effect of partial bond on stress distribution was more significant at screw body and apex region than in crestal region. Partial bond cases demonstrated greater stress accumulation in trabecular bone than cortical bone. It is concluded that the more accurate model of implant and bone which affects stress and strain distribution is needed to mimic in vivo behavior of implants.

• Molecules and Cells
• /
• v.23 no.1
• /
• pp.115-121
• /
• 2007

Root nodule formation is controlled by plant hormones such as auxin. Auxin-repressed protein (ARP) genes have been identified in various plant species but their functions are not clear. We have isolated a full-length cDNA clone (EuNOD-ARP1) showing high sequence homology to previously identified ARP genes from root nodules of Elaeagnus umbellata. Genomic Southern hybridization showed that there are at least four ARP-related genes in the genome of E. umbellata. The cDNA clone encodes a polypeptide of 120 amino acid residues with no signal peptide or organelle-targeting signals, indicating that it is a cytosolic protein. Its cytosolic location was confirmed using Arabidopsis protoplasts expressing a EuNOD-ARP1:smGFP fusion protein. Northern hybridization showed that EuNOD-ARP1 expression was higher in root nodules than in leaves or uninoculated roots. Unlike the ARP genes of strawberry and black locust, which are negatively regulated by exogenous auxin, EuNOD-ARP1 expression is induced by auxin in leaf tissue of E. umbellata. In situ hybridization revealed that EuNOD-ARP1 is mainly expressed in the fixation zone of root nodules.

• Korean Journal of Child Studies
• /
• v.7 no.1
• /
• pp.67-84
• /
• 1986

The purpose of the present research was to investigate cross-modal transfer, especially tactual-to-visual transfer in infancy and to study the relation between failure of cross-modal transfer performance and length of familiarization period. The subjects of this study were 60 infants, 10 boys and 10 girls at each level: six, nine, and twelve months of age. All were normal, healthy, full-term babies. The mothers' educational achievement was controlled at more than 12 years of schooling. There were two separate experimental conditions, one 30-sec and one 60-sec familiarization period. Each experimental condition consisted of a tactual familiarization and a visual recognition memory test. Each child was presented with these 2 sets of cross-modal stimuli in one of the 2 experimental conditions. Infants' visual responses in the visual recognition memory test were videotaped for 20 seconds. Visual fixation time to novel and familiar stimuli was observed throughout the test. The data was analyzed with t-test, percentage of total fixation time to novel stimuli, and ANOVA. The results showed that: 1) Significant differences were found in the cross-modal transfer performance from touch to vision between the 3 age groups. This is, 6 and 9 month old infants didn't show cross-modal transfer in the 30-sec condition, but 12 month old infants did show cross-modal transfer in the 30-second. 2) In all 3 age groups, no significant differences were found in cross-modal transfer performance between the two conditions.