• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.39-46
• /
• 1985

Heading time was hastened by the combination of seeding time and longday treatment in order to elucidate the effect of early heading on earliness in maturity, vegetative growth and grain yield in five barley varieties and four wheat varieties under field conditions in Suwon, Korea, 1978-79. About 15 days of earliness in heading accelerated only 2 to 6 days in maturity. Furthermore, the duration of grain fill was not much prolonged comparing with the extension of days from heading to maturity, because of the extension of periods from heading to anthesis at lower temperature resulting in somewhat greater final grain weight. Periods from heading to anthesis and from anthesis to maturity were negatively correlated with the air temperature. In early heading, leaf area at 10 days after anthesis and net assimilation rate were much limited, and although leaf area duration got larger, presumably, it could not make up for the reduction of grain yield. Grain yield per plant reduced noticeably in early heading. This was mainly caused by the reduction of spike number and grain number per spike.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1642-1644
• /
• 1999

This paper provides the results of dielectric properties for aged or controlled lightening arresters. The aged lightening arresters were used for five years in distribution line. The leakage current of lightening arresters and elements was measured to confirm whether the lightening arrester was deteriorated or not. The microstructure was also investigated to determine the size of grain and grain boundary. The dielectric properties of aged lightening arresters were compared to those of controlled lightening arresters. The dielectric constant and the tan${\delta}$ of aged lightening arrester were larger than those of controlled one, resulting from accelerated aging due to the thin grain boundary.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.227-232
• /
• 2008

Drought stress is one of the major abiotic stresses in agriculture worldwide. We report here a proteomic approach to investigate the impact of post-fertilization drought on grain quality in rice seed endosperm (Oryza sativa cv. IR-64). Plants were stressed for 4 days at 3 days before heading. Total proteins of endosperm were extracted and separated by two-dimensional gel electrophoresis. Not many protein spots showed differential accumulation in drought-stressed samples. More than 400 protein spots were reproducibly detected, including three that were up-regulated and five down-regulated. Mass spectrometry analysis and database searching helped us to identify six spots representing different proteins. Functionally, the identified proteins were related to protein synthesis and carbohydrate metabolism, such as Granule-Bound Starch Synthase (GBSS, Wx protein), which is thought to play a very important role in starch biosynthesis and quality, a very crucial factor in determining rice grain quality.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.146-151
• /
• 1998

A study was carried our to investigate the characteristics of physico-chemical components palatability of cooked rice accoring to different transplanting time. The treatments were consisted of five transplanting time, from May 5 to July 5 at 15 -day intervals, and six cultivars ; two early-maturing, two mid-maturing and two late-maturing cultivars which are clearly identified by evaluation of cumulative temperature and growth duration from seeding to heading of rice plants. In gelatinization characteristics of rice grain, alkali digestion value was low in the earlier transplanting regardlessof maturing types. Initial pasting temeprature maximum viscosity and breakdown as amylogram charcteristics were high at the transplanting of June 5. The palatability of cookedrice was evaluated that early-maturing cultivars were much better in early transplanting than in late transplanting . The optimum transplanting time for palatibility was the periods from May 5 to 20 in early maturing varieties, May 20 to June 5 in mid-maturing and June 5 to June 20 in late-maturing ones at Honam district in Korea.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.29-39
• /
• 1986

Several heat treatment were applied to on HSLA steel of type StE47 (German standard) to produce five ferrite microstructures of different strength and at least two different grain sizes respectively. Whereas the ferrite microstructure had a strong influence on yield strength the effect of grain size was negligible. The different strength levels could be explained by regarding the arrangement of dislocations and vanadium carbide particles, and their mutual interaction. Specimens tranformed at $600^{\circ}C$ showed the highest strength levels. In this case precipitation has occured after the $\gamma$- $\alpha$ transformation. Very small VC particles are arranged mostly along dislocation lines. Increasing both, grain size and pearlite volume fraction leads to a remarkable shift of transition temperature which was further enhanced by increasing ferrite strength.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.2
• /
• pp.136-140
• /
• 2004

Twenty-one lowland rice genotypes were evaluated for their stability parameters with respect to grain yield in a multi locational trial at five different sites of Eastern India viz. CRRI, Cuttack (Orissa); OUAT, Bhubaneswar (Orissa); CRS, Masodha (UP); RAU, Pusa (Bihar) and RARS, North Lakhimpur (Assam). Pooled analysis of variance reflects existence of genotype x environment interactions and contribution of both linear and nonlinear components to genotype (G) x environment (E) interactions. Through stability parameter analysis it was found that Rayda $\textrm{B}_3$, CR 778-95 and CR 661-236 were suitable for over all environments where as Sabita, OR 1334-16 and OR 1358-RGA-4 were suitable for rich environments. PSR 1209-2-3-2, CR 780-1937, Ambika, OR 877-ST-4-2 and CR 662-2211 were identified for poor environments.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.55-55
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type(Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvestirg losses and milling quality. The study was also concerned atout the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these results, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional harvesting systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture. The results are summarized as follows: 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system, 2.1 to 4.8 percent for the harvesting system by use of binder, and 2.8 to 4.3 percent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 per cent. Milling recovery of the harvesting system by use of binder, 74.8~ 75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74. 3~75. 0 percent, and that of the harvesting system by use of combine, 73.8~ 75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 perent for the system by use of combine as the grain moisture was reduced from 28 to 16 percent.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.56-80
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type (Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvesting losses and milling quality. The study was also concerned about the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these result, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture . The results are summarized as follows ; 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system , 2.1 to 4.8 per cent for the harvesting system by use of binder, and 2.8 to 4.3 per cent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 percent. Milling recovery of the harvesting system by use of binder, 74.8 ∼75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74.3 ∼75.0per cent, and that of the harvesting system by use of combine, 73.8 ∼75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 per cent for the system by use of combine as the grain moisture was reduced from 28 to 16 per cent. 3. Milling recovery of Tong-il variety harvested by the traditional harvesting system was 72.3 ∼73.6 percent and it was lower when compared to that of 72.3∼75.0 per cent harvested by binder, and 73.0∼74.6 percent harvested by combine. 4. Head rice recovery of Tong-il variety harvested by the traditional harvesting system (58.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1575-1579
• /
• 2007

The glucose tolerance and pancreatic insulin secretion response to glucose in sheep fed on germinated sorghum grain were determined using an intravenous glucose load. Twelve male Thin Tail sheep (an Indonesian native sheep, 12 months old and 14.8 kg average body weight) were divided randomly into sorghum grain-based (S), germinated sorghum grain-based (G) and maize grain-based (C) diets. Sheep were maintained at the same daily intake levels of metabolizable energy and crude protein in the diets throughout the experimental period. After two months of the experimental conditions, each diet group was subjected to an intravenous glucose load experiment in which five doses of glucose (0, 10, 20, 40 and 80 mg/kg BW) were injected to estimate the rate of glucose removal from blood and the pancreatic insulin secretion response. For each sheep and each glucose load dose, the incremental blood serum glucose and insulin concentrations above pre-injection concentration were calculated as serum glucose and insulin response areas. At all glucose doses, sheep fed on S diet had a greater (p<0.05) glucose response area compared to those of sheep fed on G and C diets. Likewise at all glucose doses, the insulin response area was smaller (p<0.05) in sheep fed on S diet than in sheep fed on G and C diets. The glucose and insulin response areas in sheep fed on G and C diets differed slightly. It was concluded that the portion of maize grain in the ruminant ration could be substituted by germinated sorghum grain.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.161-166
• /
• 2013

PURPOSE. This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS. Ten specimens of each of two commercial brands of zirconia (Lava and KaVo) were made and sintered under five different conditions. Microwave sintering (MS) and conventional sintering (CS) methods were used to fabricate zirconia specimens. The dwelling time was 20 minutes for MS and 20 minutes, 2, 10, and 40 hours for CS. The density and the grain size of the sintered zirconia blocks were measured. Total transmission measurements were taken using a spectrophotometer. Two-way analysis of variance model was used for the analysis and performed at a type-one error rate of 0.05. RESULTS. There was no significant difference in density between brands and sintering conditions. The mean grain size increased according to sintering conditions as follows: MS-20 min, CS-20 min, CS-2 hr, CS-10 hr, and CS-40 hr for both brands. The mean grain size ranged from 347-1,512 nm for Lava and 373-1,481 nm for KaVo. The mean light transmittance values of Lava and KaVo were 28.39-34.48% and 28.09-30.50%, respectively. CONCLUSION. Different sintering conditions resulted in differences in grain size and light transmittance. To obtain more translucent dental zirconia restorations, shorter sintering times should be considered.