• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.99-105
• /
• 2007

In clinical practice, air bubbles trapped in the pit and fissure may increase early loss of sealing materials for fracture, wear and microleakage. The purpose of this investigation was to examine the bubble behavior of pit and fissure sealant. The 140 replicas made of epoxy resin were used to this experiment. Following conditioning, light-polymerized sealants were applied and then exposed to the light source. After stereoscopic examination of standarized specimen by grinding, bubble behavior was analysed. The results obtained were as follows; 1. Ultraseal $XT^{(R)}$ plus grops irrespective of using time were higher than groups of $Helioseal^{(R)}$ with clinpro tip and metal tip in the frequency of bubble(p<0.05), 2. Ultraseal $XT^{(R)}$ plus old group was more than $Clinpro^{(R)}$, Teethmate $F-l^{(R)}$ and $Helioseal^{(R)}$ with brush tip in the number of bubble under 200 magnified cross section(p<0.05). 3. The widest mean area of bubble was shown in the Teethmate $F-1^{(R)}$. 4. No statistically significant difference of the frequency and the site of bubble between $Clinpro^{(R)}$ and $Helioseal^{(R)}$ groups(p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.122-129
• /
• 2007

The purpose of this study was to evaluate the effects of a various light curing time on the residual monomers released from light-cured dental sealant, and to examine the effectiveness of surface treatment in reducing the oxygen-inhibited layer of light-cured dental sealant($Helioseal^{(R)}$ F, Vivadent, Liechtenstein). Specimens were cured with a halogen light curing unit(XL 3000, 3M, USA) for 20, 40, 60s. Surface treatment of a light-cured dental sealant included no treatment(control group), a 10-seconds exposure to distilled water(Group I), 10-seconds manual application using a cotton pellet wetted with 75% alcohol(Group II), and 10-seconds application of a water/pumice slurry using a rubber cup on a slow-speed handpiece The specimens were eluted in distilled water for 10 minutes. All elutes were analyzed by HPLC for identification and quantitive analysis of monomers. The results of this study can be summarized as follows. 1. None of the chromatograms of the tested sealant displayed peaks with the same retention time as that of the standard solution, except for TEGDMA. 2. The release of TEGDMA decreased with increasing curing time in conventional halogen light. 3. All surface treatment group had a decrease of monomer release in comparison with no treatment group. 4. Treatment that Group III eliminated the greatest amount of any type of residual monomers. 5. The elution of unreacted monomers from curing with halogen curing unit for 60s and Group III was less than other groups.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.4
• /
• pp.631-637
• /
• 2013

Objectives : The aim of the study is to propose the fundamental data for further developments of the school dental clinic program through evaluating comprehensive improvements of the indices and the oral health status. Methods : This studied was carried out from December 2010 to September 2012. Subjects were 239 elementary school 4th, 5th, 6th grade students having no school dental clinic and 195 elementary school 4th, 5th, 6th grade students having school dental clinic in Busan. They completed self-reported questionnaires after accepting informed consent. The questionnaire included knowledges, attitudes and practices for oral health recognition and supports of the school dental clinic program. Results : Permanent tooth caries prevention rate revealed 59.0%, 53.3%, and 62.0%. in 4th, 5th, and 6th respectively. Rate of Care Group with fissure sealant permanent teeth showed 80.3%, 88.0%, and 88.9% respectively. Index of Care Group with fissure sealant permanent teeth revealed 2.68, 2.90, and 3.97, respectively. DMFT index of Care Group was 1.11, 1.35, and 1.51, respectively. Active D rate of Care Group resulted in 16.7%, 24.1%, and 16.7%, respectively. Dental health education group showed high awareness level of fluoride and sealant effect for caries prevention. Tooth brushing of three times per day was more effective when using rolling tooth brushing. On the other hand, oral health recognition and oral status in the control group was low. Conclusions : Oral health recognition was closely related to good oral care. Expansion of oral health care business is important to prevent dental caries. Systematic approach for oral health education programs and human resources development is very important to improve oral health care.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.85-89
• /
• 2000

There has recently been some trials to add the fluoride-releasing property to existing fissure sealants and some of them are already commercially available. But, some questions mat naturally be arisen regarding the potential decrease of physical properties by adding the fluoride despite its new caries-inhibiting abilities. This study was performed for the purpose of comparing the shear bond strengths of conventional composite sealant, Fluoride-releasing sealant and glass ionomer sealant, and obtained the results as fellows. 1. Two kinds of composite sealants (Helioseal and Teethmate-A) showed slightly higher bond strength than Fluoride-releasing sealant(Teethmate-F) without any significance(p>0.05). 2. Class ionomer sealant (Fuji III) was much lower than composite sealant in shear bond strength(p<0.05). 3. With the result of this study, it was found that there is little effect on retentive properties of sealants by adding fluoride to amplify the caries-inhibiting properties.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.57-63
• /
• 2019

This study aimed to determine whether the curing times of Xtra Power and High Power modes of high-power light emitting diode (LED) curing light are sufficient for polymerization of resin sealants. The specimens were prepared and their microhardness values were measured and compared with those of specimens polymerized under conventional LED curing light. The filled sealant polymerized for 8 seconds in the High Power mode and for 3 seconds in the Xtra Power mode showed significantly lower microhardness than the control specimen (p = 0.000). The unfilled sealant polymerized for 8, 12 seconds in the High Power mode and for 6 seconds in the Xtra Power mode showed significantly lower microhardness than the control specimen (p = 0.000). The results of this study suggest that the short curing time with the Xtra Power and High Power modes of highpower LED curing light are not sufficient for adequate polymerization of sealants under specific conditions, taking into account the curing times and the type of sealant.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.106-121
• /
• 2007

The purpose of this study was to examine the effects of suggested etching method on the performance of pits and fissures sealant. In the first part, seventy extracted sound human permanent third molars and premolars were used. The teeth were randomly divided and performed in three different groups as follows : conventional etching, enameloplasty, and testing group. Non-pumicing, dye-guidance vigorous brushing-start etching technique was applied on the occlusal of testing group. Then the pit and fissure sealant was applied on all of the specimens. After the thermocycling and immersing in 1% methylene blue, the resin embedded sections were made. The microleakage data on the section were then recorded under the stereoscope and statistic analysis was done. Additional experiments were also performed : direct fissure surface etched pattern experiment, replica study, and micro-shear bond strength testing observation. The second part included two groups. A paired study was designed to evaluate the influence the environment has on the performance of the sealant. After etching, half of each occlusal surface received one of the two following treatments in succession: sealing in laboratory and intraoral condition (group 1), sealing in intraoral condition with and without a single-bonding agent (group 2). The results of present study can be summarized as follows: - The microleakage of testing group was significant different with conventional method (P<.05) and was not different with the enameloplasty group (P>.05). - The quality and quantity of etched enamel were improved. - Microshear bond strength of testing group was higher than control group (p<.05). - The environmental condition was influenced on the performance of the sealant. The testing etching method modified the capacity of the etching agent to penetrate into the pits and fissures, and simultaneous enhance their efficiency in vitro condition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.70-76
• /
• 2006

The aim of this study was comparison of effectiveness of surface treatment methods in reducing the oxygen-inhibited layer of a commercially available freshly polymerized, light cured dental sealant($concise^{TM}$, 3M, St Paul, USA). Surface treatment groups were consisted of no treatment(negative control group) and 3 experimental groups according to surface treatment of light-cured sealant. Experimental group I was 10 seconds' exposure to distilled water syringe, group II was 10 seconds' manual application using a cotton pellet wetted with 75% alcohol and group III was 10 seconds' prophylaxis with pumice/water slurry using rubber cup on a slow-speed handpiece. All specimens were immersed in 5ml distilled water and stored at 37c water bath for 10 minutes. All eluates were analyzed by HLPC for identification and quantitive analysis of monomers. The results of this study can be summarized as follows. 1. None of the chromatograms of the tested sealant displayed peaks with the same retention time as that of the standard solution, except for TEGDMA. 2. All surface treatment group had a statistically significant decrease of monomer release in comparison with no treatment group. 3. Removal effects of unreacted monomer in group III was statistically significant in comparison with group I and group II. These results revealed that mechanical method using pumice and rubber cup is the most effective in removing residual monomer and may be valuable to be used effectively in clinic.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.77-83
• /
• 1983

The purpose of this study was to observe the microleakage of a pit and fissure sealant at the tooth-restoration interface. One hundred and sixty-seven extracted permanent and deciduous teeth were used and some simple mechanical pretreatment were done before etching. The degree of microleakage was assessed by $Ca^{45}$ after 24 hours, and 2 months. The results were as follows: 1. Among total 167 teeth, 53 teeth (32%) were demonstrated the microleakage. 2. After 2 months the leakage was increased from 22 percent to 35 percent in permanent teeth, and from 32 percent to 43 percent in primary teeth. 3. The group treated by fluoride paste was demonstrated the largest leakage, 50 percent in primary teeth and 33 percent in permanent teeth. There are more leakage in primary teeth (38%) than permanent teeth (28%).

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.201-211
• /
• 2001

Dental caries causes the majority of tooth loss among Koreans. Korea is experiencing an increase in dental caries. And it shows a high prevalence of caries in preschool children, which contrasted with the much-improved situation in developed countries. So, it is important to control caries from preschool periods in Korea. Recently, inspections of the teeth of preschool children for evidence of dental disease became a legislative duty in Korea following Oral Health Act(2000). But, standardized oral health programs in preschool children is not yet proposed. Therefore, it is necessary to develop an community based oral health program in preschool children. The purpose of this study was to obtain basic data for the development of community based oral health program in preschool children of Sungnam city. Oral health status in primary dentition were surveyed in 862 2-6 year-old preschool children of Sungnam city by WHO criteria. From the data, df rate, percentage of preschool child ren with active caries, dft index, dt rate, percentage of preschool children with pit and fissure sealant of each age were calculated, and discussed. The obtained results were as follows : 1. The experience of dental caries in primary dentition showed a tendency to increase quickly between 2 and 3 year old children. So, the oral health program in preschool children should be developed to prevent dental caries and control their oral health under three years of age. 2. In 5 year-old children, the percentage with active caries was 60.8% and dft index was 5.06. The dt rate showed a tendency to decrease as proportion to age, but even though 6 year-old children, the dt rate was 47.7%. Therefore, the annual screening dental examination and oral health education programs at the institution for preschool children should be developed to detect and treat dental caries in primary dentition at early stage. 3. The percentage of preschool children with pit and fissure sealant at six years of age was 10.2%. So, pit and fissure sealant and professional fluoride application programs in Public Health Center should be developed to prevent dental caries. 4. Also, it is necessary to establish oral health goals in preschool children and develop water fluoridation program 10 improve and preserve oral health of preschool children in Seongnam city, effectively.

• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.768-774
• /
• 2015

The purpose of this study was to grasp the benefits from pit and fissure sealants and to analyze the factors of influencing the benefit amount by using the raw data of the Korea National Health and Nutrition Examination Survey for 2007~2013 targeting the subjects aged from 6 years in full to 18 years. The analysis was used STATA 11.0. As a result of the analysis, the following conclusions were obtained. It rose up to 1.24 pieces after carrying out the national health insurance coverage from averagely 0.93 piece until the year in 2007~2009 (up to November) when is before enforcing the national health insurance coverage in the pit and fissure sealants. The benefits from pit and fissure sealants depending on general characteristics were surveyed to be higher in the higher income level, in the more subscription to health insurance and private insurance, and in the more toothbrushing frequency per day. The factors that have influence upon the benefits from pit and fissure sealants were shown to include whether or not to have the national health insurance coverage in the pit and fissure sealants, income level, health insurance type and private insurance subscription appearance, and one-day toothbrushing frequency. Synthesizing the results, a rise in the benefits from pit and fissure sealants is shown in 2010 based on December 2009 when the national health insurance coverage in the pit and fissure sealants was implemented, but is showing the tendency of declining again from 2011. To increase the benefits from pit and fissure sealants, it is thought that the schemes will need to be discussed such as reinforcing publicity on the national health insurance coverage in the pit and fissure sealants, expanding a support for low-income bracket, and differentiating the outpatient cost sharing according to socio-economic level.