• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.35-39
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was chanced to granule type from needle type with increasing $B_2O_3$ content. Average particle size of the glass-ceramics after water swelling was 3.77$\mu\textrm{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4%, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.510-514
• /
• 1997

The thin film that is electrically conductive and optically transparent is called conductive transparent thin film. ITO(Indium-Tin Oxide) which is a kind of conductive transparent thin film has been widely used in solar cell, transparent electrical heater, selective optical filter, FDP(Flat Display Panel) such as LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and so on. Especially in PDP, ITO films is used as a transparent electrode in order to maintain discharge and decrease consumption power through the improvement of cell structure. In this study, we prepared ITO by reactive r.f. sputtering with indium-tin(Sn 10wt%) alloy target instead of indium-tin oxide target. The ITO films deposited at low temperature 15$0^{\circ}C$ and 8% $O_2$. Partial pressure showed about 3.6 Ω/$\square$. At the end of firing, the resistance of ITO was decreased, the optical transparence was improved above 90%.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.24-29
• /
• 2000

MgO thin films were deposited on soda lime glass substrates by rf magnetron sputtering using a MgO target at various oxygen flow ratios in order to probe the relationship between MgO film properties and discharge characteristics. MgO films have a tendency to form microstructures with a preferred growth orientation of (200) with increasing oxygen flo ration up to 0.1 $O_2$/(Ar+$O_2$). MgO film obtained at 0.1[$O_2$/(Ar+$O_2$)] was found to be fully stoichiometric. The stoichiometric MgO film was observed to have relatively very clean surface and grains of large size and contain almost no hydroxyl group. The AC PDP with fully stoichiometric MgO film showed lower firing and sustain voltages than those with magnesium-rich or oxygen-rich MgO films, being largely attributed to the larger grain size and the minimized hydroxyl group.

• 제어로봇시스템학회논문지
• /
• 제13권2호
• /
• pp.121-127
• /
• 2007

Frequent occurrences of a fire cause tremendous loss of human lives and their property. Recently, in order to cope with such catastrophic accidents, researches on fire-fighting robots are carried out in developed countries. Under the dangerous situations, it is sometimes impossible for fire-fighting men to access the firing place because of explosive materials, smoke, high temperature and so on. In such an environment, fire-fighting robots can be useful to extinguish the fire. It is usually very dangerous place where fire-fighting robots operate. Hence, these robots should be controlled by remote users who are for away from the firing place exploiting remote communication systems. This paper considers the communication systems between fire-fighting robots and remote users. The communication systems consist of two parts; digital packet communication systems and analog image communication systems. Digital packet communication systems transfer data packets in order to control fire-fighting robots and to check the state of the fire-fighting robots. Remote users watch the video around the fire-fighting robots by exploiting the analog image communication systems. In the future, the more prosperous the commercial communication network systems will be, the more evolved the communication systems for fire-fighting robots are.

• 항공우주기술
• /
• 제10권2호
• /
• pp.65-73
• /
• 2011

위성의 발사 후 정지궤도위성을 운용궤도에 진입시키기 위해서는 전이궤도 원지점 (Apogee)에서 위성에 장착된 액체원지점엔진을 발사하여 근지점(Perigee) 고도를 정지궤도 고도에 이르도록 높여준다. 이 과정에서 궤도결정 결과를 피드백하여 정밀하게 궤도조정을 수행하고 종료 후 원하는 경도에 안착시키기 위해 상황에 따라 엔진발사를 3회에서 4회로 나누어 수행하게 된다. 본 논문에서는 먼저 임펄스 형태의 기동을 가정하여 각 액체원지점 엔진 발사시점과 ${\Delta}V$ 벡터를 결정하기 위한 알고리즘을 수립하였고, 추가적으로 연속점화에 따른 오차를 보정하기 위한 기법을 제안하였다. 또한 시뮬레이션을 통하여 제안된 기법의 타당성을 분석하였다.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.619-630
• /
• 2003

본 논문은 최근에 많이 사용되는 정형 계산 모델 중 하나인 hierarchical FSM (HFSM)과 synchronous dataflow (SDF) 모델(줄여서 HFSM-SDF)을 이용한 재구성 가능한 SoC 설계에서 실시간 구성 스케줄링(configuration scheduling) 방법을 제시한다. HFSM-SDF 모델을 이용한 재구성 가능한 SoC 설계에서는 HFSM이 갖는 동적인 특성들(예를 들면, AND 관계에 의해 동시에 일어나는 state transition, HFSM이 갖는 복잡한 control flow, 그리고 그에 따른 SDF actor firing의 복잡한 스케줄등)로 인해 구성 스케줄링이 어려운 일이 된다. 그리고 이러한 동적인 특성들로 인해 정적인 구성 스케줄링 방법을 이용해서는 구성에 의한 지연(configuration latency)을 적절히 감추는 것이 어렵다. 본 논문에서는, 이 문제를 해결하기 위해, 실시간에 정확한 구성 순서를 찾은 후, 이를 이용한 동적인 구성 스케줄링 방법을 제안한다. 우선, 실시간에 필요한 구성 순서를 찾기 위해서는, HFSM-SDF 모델이 갖는 특징, 즉, SDF actor들의 실행 순서(firing schedule)는 최상위 FSM state transition 직전에 알 수 있다는 점을 이용할 수 있다. 이렇게 최상위 FSM의 매 transition마다 SDF actor들의 구성 순서를 찾아, ready configuration queue(ready CQ)에 저장한 후에, 전체 시스템의 state transition을 수행하며, 이 과정에서 FPGA에 (기존에 FPGA를 점유하고 있던 SDF actor의 종료 등으로 인해) 공간이 남으면, 실시간 구성스케줄러는 ready CQ를 살펴보고, 필요한 구성을 다운로드한다. 본 논문에서 제시한 실시간 구성 방법을 MPEG4의 natural video decoder와 IS95의 modem 예제에 적용해 본 결과, 수행 시간이 최대 21.8%까지 향상되었으며 메모리 사용의 부담은 무시할 수 있을 정도였다.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.554-564
• /
• 2020

In environment of torpedo firing, underwater acoustic signal is generated by target and noise. Sound wave which is generated from acoustic signal is propagated by seawater and it is received through the sonar(sound navigation and ranging) system mounted on torpedo. In the ocean, acoustic signal or sound wave from target that is generated by the spread of broadband can be attenuated by ambient noise and can be lost by medium and environment. This research is designed to support teamwork training in Naval operations by constructing a simulation system that is more similar to the real-world conditions. This paper attempts to research the modeling of target detection and to develop the simulation of torpedo sonar(TOSO). In order to develop the realistic simulation, we researched the broadband sound modeling of target and noise source, the modeling of acoustic transmission loss by chemical component of seawater, and the modeling of signal attenuation by ambient noise environment which is approximated by experimental measurements in seawater surrounding the Korea Peninsular and by experience of Navy's actual torpedo firing. This research contributed to constructing more practical simulation of torpedo firing in real time and the results of this research were used to develop a teamwork training system for the Navy and their education.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.76-81
• /
• 2014

군용 헬리콥터는 적 지역에 침투 시 저공비행 및 침투비행으로 인해 적의 소형화기에 노출되면서, 피탄에 의한 항공기의 폭발 유발 가능성이 높다. 최근 군요구도에 있어서 피탄에 의한 폭발 환경에 대해서 생존성 확보를 위한 내탄 성능을 요구한다. 국내 최초의 군용 헬리콥터인 한국형기동헬기의 연료계통 요구도에도 적의 피탄에 대한 내폭발성을 요구하고 있으며, 요구도 충족을 위해 국내 최초로 탑재형 불활성 가스발생장치(OBIGGS)를 적용하였다. 개발단계에서 미흡하게 설계된 내폭발성과 연관된 Vent System을 개선하여 내폭발성 성능을 재평가하고 설계에 적합함을 입증하였다.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.99-106
• /
• 2011

본 연구에서는 공사현장에서 사용하고 있는 칼라 부직포의 화재위험성을 평가하기 위하여 콘칼로미터와 수직화염전파성 실험을 실시하였다. 그 결과 칼라 부직포는 표변에 화염이 착화가 되는 것이 아니라 용융이 된 상태에서 가연성가스가 발생되어 착화되는 연소형태를 보였다. 수직화염전파성 실험의 경우 가열강도에 의해 칼라 부직포가 수축 및 파단되어 화염이 전파되지 않을 정도로 열에 매우 취약하였다. 총방출열량은 2.66 MJ/$m^2$로, 건축물 실내마감재료 난연성능평가의 준불연재료(10분), 난연재료(5분) 8 MJ/$m^2$ 이하 기준에 규합되지만 이것은 내장재의 기준으로 칼라 부직포가 난연성능을 가지고 판단할 수 없으며 외장재에 대한 난연성능과 실험방법에 대한 기준이 마련되어야 한다고 판단된다.

• Annals of Clinical Neurophysiology
• /
• 제4권1호
• /
• pp.12-15
• /
• 2002

Background : Changes in firing pattern and in the recruitment order of single motor unit(MU) have been claimed to be characteristic of central motor lesions, and a reduced firing rate was found in upper motor neuron lesions. But these findings have been rarely studied before in Korea, so we studied initial MU recruitment pattern in stroke patients with hemiparesis. Methods : We studied six patients(3 men and 3 women) whose mean age was $60.6{\pm}7.4$ years. A mean $20.6{\pm}16.2$ months had elapsed since the stroke. To compare the initial MU activation patterns in proximal and distal segments of paretic limb with their contalateral unaffected counterparts, we studied the onset and recruitment intervals in biceps brachii(BB) and first dorsal interossei(FDI) muscles in paretic and healthy arms. In a single muscle we examined from 5 to 10 individual MUs. And in a single motor unit, both the onset interval and the recruitment interval was examined. Results : The mean onset interval in paretic limb was significantly(p<0.05) longer than unaffected limb at proximal and distal location: BB $118.5{\pm}17.8$ msec vs $96.1{\pm}8.3$ msec(n=58); FDI $125.8{\pm}16.7$ msec vs $101.5{\pm}17.2$ msec(n=38). The mean recruitment interval in paretic limb was also significantly(p<0.05) longer than unaffected limb: BB $87.7{\pm}14.9$ msec vs $73.4{\pm}11.5$ msec(n=53); FDI $96.3{\pm}16.4$ msec vs $87.7{\pm}14.1$ msec(n=38). Conclusion : The first recruited MU had a lower baseline firing rate and the second recruited motor unit potential appeared earlier in paretic than in healthy muscles. And these findings may explain one of the reasons for paresis in patients with stroke.