• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1642-1644
• /
• 1996

Passivation must prevent ionic charge movement on the surface of the junction, thereby minimizing the junction leakage and maximizing the breakdown voltage of the devices. Borosilicate glasses are widely used as surface passivants for such silicon power devices as thyristors, transistor, and diodes. Since these 91asses are electrically stable at high temperatures and in high electric fields, they can readily be applied as a thick film, and they are resistant to humidity and have low ionic mobility. A deposition technique of glass film on the silicon surface by electrophoresis in which acetone is used as a suspension medium has been investigated. The purpose of this paper is to describe electrophoretic deposition method for glass passivation and characteristics of glass films which were compared using DTA, SEM, XRD, as a function of firing temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.367-369
• /
• 1997

The process of designing protective circuits for signal lines usually consists of a time-consuming trial-and-error procedure, which also requires expensive equipment. However, computer simulation can drastically reduce the costs and time of design procedures based on experimental validation. In this study a gas arrester Pspice-model considering the response time characteristics is presented. The effects of various waveforms on the transient behaviors and firing voltages of a gas arrester were modeled by controlled voltage source E and TABLE function of PSpice, respectively. To estimate the characteristics of the gas arrester model proposed, three different voltage waveforms were used in the simulation and the measurement. The results of the computer simulation are in Rood agreement with the results of the experimental analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.379-381
• /
• 1997

The dielectric layers in AC plasma display panel(AC PDP) are essential to the discharge cell structure, because they protect metal electrodes from sputtering by positive ion and from a sheath of wall charges which are essential to memory function of AC PDP. Furthermore, this layer should be transparent because the visible light must pass through the layer. In this paper, the dielectric breakdown strength and transparency of the dielectric layer on the discharge electrodes are studied. The variables in this test are the dielectric layer thickness, dielectric firing condition, gas pressure, species of gas and so on.

• 한국국방경영분석학회지
• /
• 제3권1호
• /
• pp.97-107
• /
• 1977

This report examines several models, such as random or area bombardment, salvo fire and pattern fire, for the computation of target coverage when multiple rounds are fired at a target. Fractional kill of a fragment sensitive target by a fragmenting projectile as a function of the number of rounds fired is compared for two salvo fire models. The first is a standard salvo fire model in which N rounds are fired at the same aim point, in the second model single kill probability is computed for a fragment sensitive target and then fractional kill from the firing of N rounds is computed according to the assumption that the effects of each round are independent. Because the method of solution becomes very laborious for large patterns, this report gives a method only for the case of evaluating the effectiveness of stick and trianglar pattern fire. The need for the sophisticated and complicated target coverage models is demonstrated by the results of computations performed in this report.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1343-1350
• /
• 1998

A study is made of mechanical properties of unglazed matrix as a funtion of sintering temperature and crack patterns in layer structur pottery consisting of glaze and substrate and in matrix which is sintered at 120$0^{\circ}C$ and 130$0^{\circ}C$ respectively. The mechanical properties of matrix are increased due to density and vitrification to 130$0^{\circ}C$ The interface of glazed bilayer reveals the reactive intermediate layer. Herzian indentation testing is used to investigate the evolution of damage modes as a function of load. In the materials sintered at 120$0^{\circ}C$ quasi-plastic deformation is developed at the matrix and the cone-like cracks initiate at the glazing top surface and additionally upward-extending transverse cracks initiate at the internal in-just initiate at the glazing top surface which pass through the interface with increasing of indentation load. Finally the dominant damage mode shifts from substrate quasi-plasticity to coating fracture with increasing sintering temperature.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.511-519
• /
• 2010

This paper presents the modeling and validation of a pile-driver breech fatigue testing system model to replicate actual high pressure in a large caliber gun barrel. A hysteresis damping function was incorporated in the nonlinear impact force model. Test of real pile-driver breech fatigue testing system had been performed for model validation. Comparison of the experimental result and model simulation during impact were made. Numerical studies were performed to evaluate how the actual chamber pressure pattern in the live firing of gun barrel was affected by parameters' variation. Some of the parameters simulated included input velocity, damping coefficient and stiffness. As a result, a variety of actual chamber pressure pattern could be reproduced and controlled through current simulation model.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.752-761
• /
• 2013

A new gun fire control system has been developed for the Korean next generation frigate class. The engineering requirement was far more tightened than the PKG-A class for the firing range availability and gun control function since 5 inch gun is adopted for the new ship. We mention about the principal technologies required to build a generic gun fire control system and proposed methods for the new gun fire control system. The new system has been designed based on the proposed methods in order to satisfy the requirement and functionality has been proved to be acceptable through the sea trial by Korean navy.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.31-35
• /
• 2005

A novel synthetic aperture method for real-time three-way dynamic focusing is proposed, which provides lateral beam patterns represented as the product of Fourier transforms of transmit subaperture, receive subaperture, and a synthetic window function. In the proposed method, all array elements are fired individually and for each firing echo signals are recorded from all elements of a receive subaperture moving along an array with the transmit element. The three-way dynamic focusing is then achieved by employing a synthetic aperture algorithm for two-way dynamic focusing and a synthetic focusing method for transmit dynamic focusing. Both theoretical analysis and computer simulation results show that the proposed method produces ultrasound beams with improved lateral resolution at all depths compared to the conventional phased array imaging and synthetic aperture focusing methods.

• 보존과학회지
• /
• 제25권1호
• /
• pp.101-114
• /
• 2009

전라남도 영광군 대마면 원흥리 군동과 마전에서 발굴된 원삼국시대 가마 2기와 토기 20점을 대상으로, 광물학적 및 지구화학적 연구방법을 사용하여 태토의 산지, 토기의 제작특성, 그리고 원삼국시대 가마의 재료학적 특성을 분석하였다. 이 결과, 토기와 가마는 인근 토양과 유사한 광물조성을 갖고 있으며 주성분 원소와 희토류 원소에서 동일한 진화 경향성을 가져, 주변 토양으로 제작되었음을 유추할 수 있다. 일부 토기에서는 $P_2O_5$, CaO, $Na_2O$의 부화현상이 관찰되어 토기가 오랜 매장기간동안 토양환경의 영향을 받은 것으로 판단된다. 또한 군동유적에서 동쪽으로 약 600m 떨어진 마전유적 집자리에서 발견된 토기도 군동의 토기와 같은 태토와 제작기법으로 생산되어 인근 마전 마을에서 사용되었던 것으로 보인다. 이 토기들은 물리적 특성, 소성온도, 제작기법에 따라 세 그룹으로 분류되었다. 그룹 1은 적갈색 연질의 타날문 토기가 주를 이루는데, 붉고 공극이 많은 기질에 산화철을 많이 함유하고 비짐은 0.5mm 이하로서 소성온도는 $700{\sim}800^{\circ}C$로 추정된다. 그룹 2는 회백색 및 회청색의 타날문 토기를 포함하는데, 유리질화된 기질에 공극이 적고 비짐은 0.5mm 이하로서 소성온도는 $900{\sim}1,000^{\circ}C$로 추정된다. 그러나 일부 토기는 태토, 조직, 비짐의 특성상 그룹 2에 속하지만 소성온도가 $1,100^{\circ}C$ 이상의 고온으로 해석되었다. 그룹 3은 적갈색 및 회청색의 타날문 토기를 포함하는데, 유리질화된 그릇에 공극이 적은 편이고 비짐은 2mm 이상의 다결정질 석영과 장석으로 구성되며 소성온도는 $1,000^{\circ}C$ 부근으로 추정된다. 토기들이 같은 가마에서 동일한 태토로 제작되어도 3개의 그룹으로 나누어지는 것은 기형과 용도에 따라 다소 다른 제작방법(태토의 수비, 비짐, 가마의 소성조건)이 존재하기 때문인 것으로 보인다. 1호 가마는 가마벽이 $600{\sim}700^{\circ}C$의 열을, 바닥면은 $900{\sim}1,000^{\circ}C$의 열을 받은 것으로 나타나 고온소성이 가능한 가마였고, 2호 가마는 바닥이 $500^{\circ}C$ 이하의 열을 받은 것으로 나타나 가마로서의 역할을 수행하기는 어려웠을 것으로 해석된다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.368-376
• /
• 1999

본 논문은, 대표적인 FACTS기기중의 하나인 싸이리스터제어 병렬보상기의 특성 연구를 수행한다. 이를 위하여 푸리에 공간에서 전력조류 조건을 만족하는 싸이리스터 점호각을 수치해석적으로 구하고, 그 계산 결과를 이용하여 정상상태 및 고조파 특성을 해석하였다. 그리고, Poincare Mapping 이론을 이용한 스위칭 주파수영역에서 안정도 해석과 EMTP 시뮬레이션을 이용한 시평면상에서 해석결과의 검증 및 여러 운전점에서 과도응답특성의 비교연구를 수행하였다.