• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.110-114
• /
• 1996

The objective of this study is to consider the induction heating process and to develop the finite element program to analyze the behaviour of semi-solid materials. The semi-solid material is assumed to be composed of solid region as rigid visco-plastic model and liquid region following Darcy's law. Induction heating process is analyzed using finite element software, ANSYS, and also the behaviour of a semi-solid material considering induction heating is analyzed using developed finite element program.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.83-94
• /
• 1995

The purpose of this paper is to develop an integrated environment system for finite element structural analysis using OOA(Object-Oriented Analysis) and OOD(Object-Oriented Design), with may reduce inconveniencies in use such as file input of macro command and improve lacks of graphic presentation in the established finite element analysis program. This paper is attempted to suggest an easy approach to object-oriented concept and convenient programming. Two languages are used together in this paper instead of single C++ language for the development of object-oriented program. : Visual Basic with CDK(Custom Development Kit), and Borland C++ with OWL(Object Windows Library).

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.627-645
• /
• 2014

Using OpenSees as a framework, constitutive models of reinforced, prestressed and prestressed steel fiber concrete found by the panel tests have been implemented into a finite element program called Simulation of Concrete Structures (SCS) to predict the seismic behavior of shear-critical reinforced and prestressed concrete structures. The developed finite element program was validated by tests on prestressed steel fiber concrete beams under monotonic loading, post tensioned precast concrete column under reversed cyclic loading, framed shear walls under reversed cyclic loading or shaking table excitations, and a seven-story wall building under shake table excitations. The comparison of analytical results with test outcomes indicates good agreement.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.296-302
• /
• 2001

In this paper, the vector finite elements are adopted to calculate eigenvalues of RF and microwave components. Simulation results show that spurious are completely avoided because of the divergence free nature of the vector elements. This paper seeks to extend these low-order elements to higher orders to improve the accuracy of numerical solution. Investigation of numerical results for a rectangular waveguide was provided. A vector finite element program was implemented to allow propagation constants and electric field distributions to be directly computed in the rectangular and circular waveguides which are partially filled with the dielectric.

• 연구논문집
• /
• 통권22호
• /
• pp.65-74
• /
• 1992

This paper aims at calculating optimum design dimensions to minimize the weight satisfied strain and stress intensity of the frame while loading maximum weight into a mechanical press in the static condition. Analysis of the frame was carried out by using the FEM, then the optimum condition was obtained by using these data. As modeling in the finite element analysis has great impact on the reliablity of analysis results, the analyzed object was selected a 150-ton mechanical press of J Company, the part little affected to structural rigidity was simplified, the load condition was considered in the only maximum load, the boundary condition was used by giving symmetric displacement due to symmetric boundary condition, the finite element was applied a linear membrane element. An intermediate processor program applied the normal ANSYS to analyze finite elements was developed, and the design sensitivity was calculated. This program was applied to the optimum design.

• 한국압력기기공학회 논문집
• /
• 제18권2호
• /
• pp.50-53
• /
• 2022

To investigate the validity of the finite element analysis program to assess structural integrity of a spent nuclear fuel transport cask subjected to extreme impact loads, structural integrity of the cask for the case of an aircraft engine collision is evaluated using three FE analysis programs: Autodyn, Speed and ABAQUS explicit version. As a result of all analyses, it is confirmed that no penetration occurred in the cask wall. Even though the different programs are used, it is identified that there are insignificant differences in the FE analysis variables such as von Mises effective stress and equivalent plastic strain among the programs.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.205-212
• /
• 2018

본 연구에서는 상용 해석프로그램에서 구현하기에 어려움이 있는 지반공학적 문제를 해결하기 위한 쉽고 직관적인 해석 프로그램 개발의 일환으로 계산의 정확도가 상대적으로 높은 요소를 채택한 유한요소법을 정식화 하고 해석과정을 프로그램화 하였다. 개발된 프로그램의 계산과정에 있어서의 신뢰성 확인을 위해 두 가지 예에 대한 해석을 수행하고 결과분석을 해 보았는데 첫 번째 예는 등방구속압이 요소에 작용하는 경우이고 나머지 예는 전단응력이 요소의 측면에 작용하는 경우이다. 유한요소를 구성하는 요소로는 등매개변수 사변형 요소를 채택하였는데 요소내의 변위는 요소의 절점변위와 형상함수로 표현된다. 전체좌표(global coordinate)에 의한 미분계수로 표현되는 변형률을 얻기 위해 자코비언과 자연좌표(natural coordinate)를 이용하는 계산과정을 코딩하였다. 요소의 강성행렬을 정의하는 이중적분식을 수치적분으로 변환시키기 위해 4점 가우스 구적법을 적용하였다. 개발된 프로그램의 계산과정 검증을 위해 등방구속압이 작용하는 요소에 대한 해석을 수행한 결과 요소내의 네 개의 가우스점과 요소 중앙에 대해 계산된 응력값이 등방구속압과 일치됨을 알 수 있었다. 개발된 프로그램의 계산과정 검증을 위해 전단응력이 작용하는 요소에 대한 해석을 수행한 결과 요소내에 발생되는 횡방향응력 및 연직응력이 위치에 따라 변화됨을 알 수 있었으며 외력에 대한 발생응력의 크기 및 분포양상이 합리적임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.174-181
• /
• 1999

In this paper the technique to predict tool wear theoretically in shearing process is suggested. The tool wear in the process affects the tolerances of final pans, metal flows and costs of processes. In order to predict the tool wear the deformation of workpiece during the process is analyzed by using non-isothermal finite element program. The ductile fracture criterion and the element kill method are also used to estimate if and where a fracture will occur and to investigate the features of the sheared surface in shearing process. Results obtained from finite element simulation, such as nodal velocities and nodal forces, are transformed into sliding velocity and normal pressure on tool monitoring points respectively. The monitoring points are automatically generated and the wear rates on these points are accumulated during the process. It is assumed that the wear depth on the tool surface is linear function of the lot sizes based upon the known experimental results. The influence of clearance between die and punch upon tool wear is also discussed.

• 소성∙가공
• /
• 제6권5호
• /
• pp.408-415
• /
• 1997

The backward tracing scheme of the finite element analysis, which is counted to be unique and useful for process design in metal forming, has been developed and applied successfully in industry to several metal forming processes. Here the backward tracing scheme is implemented for process design of three-dimensional plastic deformation in metal forming, and it is applied to a precision coining process. The contact problem between the die and workpiece has been treated carefully during backward tracing simulation in three-dimensional deformation. The results confirm that the application of the developed program implemented with backward tracing scheme of the rigid plastic finite element leads to a reasonable initial piercing hole configuration. It is concluded that three-dimensional extension of the scheme appears to be successful for industrial applications.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.16-22
• /
• 2003

This paper presents an application of an impedance boundary condition to 3D vector finite element analysis of a multi-port cylidrical microwave cavity using Snell's law. Computing memory benefits and computing time reduction are obtained from this method compared with the conventional finite element method(FEM). To verify the method, a high permittivity scatterer in free space is analyzed and compared with the results of conventional (FEM). In addition, this method has been analyzed several types of cavities, including water load, to demonstrate the validity and accuracy of the program.