References
- Closed-Die Forging of Steel(in German) Lange, K.
- MCIC-HB-03 Forging Equipment, Materials, and Practices Altan, T.;Boulger, F.W.;Becker, J.R.;Akgerman, N.;Henning, H.J.
- Production to Near Net Shape Van Tyne, C.J.;Avitzur, B.
- Int. J. Mach. Tool Des. Res. v.23 no.1 A New Approach to Preform Design in Metal Forming with the Finite Element Method Park, J.J.;Rebelo, N.;Kobayashi, S.
- Int. J. Mach. Mach. Tool Des. Res. v.24 no.4 Preform Design in Plane-Strain Rolling by the Finite Element Method Hwang, S.M.;Kobayashi, S.
- Int. J. Mach. Mach. Tool Des. Res. v.26 no.3 Preform Design in Disk Forging Hwang, S.M.;Kobayashi, S.
- Int. J. Mach. Mach. Tool Manuf. v.27 no.1 Preform Design in Shell Nosing at Elevated Temperatures Hwang, S.M.;Kobayashi, S.
- Int. J. Mach. Tools Manufact. v.30 no.1 Computer-Aided Preform Design in Forging of an Airfoil Section Blade Kang, B.S.;Kim, N.S.;Kobayashi, S.
- Int. J. Mach. Tools Manufact. v.30 no.2 Preform in H-Shaped Cross Sectional Axisymmetric Forging by the Finite Element Method Kim, N.;Kobayashi, S.
- Int. J. Mach. Tools Manufact. v.34 no.8 Process Sequence Design in Cold Forging to Form a Constant Velocity Joint Housing Kang, B.S.;Kobayashi, S.
- Int. J. Mech. Sci. v.26 Three-Dimensional FiniteElement Analysis of Block Compression Park, J.J;Kobayashi, S.
- Int. J. Tool Des. Res. v.25 no.3 An Elastic-Plastic Three-Dimensional Finite Element Analysis of the Cold Forging of Rectangular Blocks and Experimental Comparison Pillinger, I.;Hartley, P.;Sturgess, C.E.N;Rowe, G.W.
- Int. J. Mum. Mech. in Engng. v.24 Finite Element Calculation of Three-Dimensional Hot Forging Surdon, G.;Chenot, J.L.
- Int. J. Mech. Sci. v.32 no.4 A Three Dimensional Rigid-Plastic Finite Element Analysis of Bevel Gear Forging by Using a Remeshing Technique Yoon, J.H.;Yang, D.Y.
- Proc. NUMIFORM'92 Mesh Topology for Mesh Generation Problems- Application to Three-Dimensional Remeshing Coupez, T.;Chenot, J.L.;Chenot(et al)(eds)
- Int. J. Mech. Sci. v.34 no.4 Finite Element Analysis of Large Deformation by Automatic Renoding as a Weak Remeshing Technique Lee, N.K.;Yoon, J.H.;Yang, D.Y.
- Int. J. Mach. Tools Manufact. v.31 no.1 Preform Design in Ring Rolling Processes by the Three-Dimensional Finite Element Method Kang, B.S.;Kobayashi, S.
- The International Conference on Mechanics of Solids and Material Engineering Extension of the Backward Tracing Scheme of the Rigid Plastic FEM to Three-dimensional Deformation Kang, B.S.;Lee, J.H.
- Metal Forming and the Finite-Element Method Kobayashi, S.;Oh, S.I.;Altan, T.