• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.213-214
• /
• 2021

External insulation method is used to conserve energy of buildings. However, the current external insulation method uses organic insulating materials to become a diffusion path in case of fire. In this study, the purpose of this study is to provide basic data on the required performance of the plastering material according to the CaCO₃ powder addition of the finishing material of the external insulation method. In Figure 1, when powder was added, the adhesion strength decreased by 30% to 35% at 10% and 0% to 50% at 20% compared to Plain. In Figure 2, the moisture permeability increases approximately twice when powder is added. The results for the water absorption coefficient are shown in Figure 3.

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.66-74
• /
• 2008

Effect of disperse dyeing on flame retardant finishing of PET fabrics via UV curing using three UV curable phosphorous-containing methacrylates and ammonium polyphosphate(APP) was investigated. The dye fixation and flame retardancy of PET fabrics did not change significantly with excellent durability to five laundering cycles irrespective of the dyeing and finishing sequence. However, the flame retardancy of Pekoflam-treated fabrics was lower than that of the UV treated and decreased substantially when heat treatment was carried out before the dyeing. The dyeability of the flame-retardant PET fabrics was not affected in the case of UV curing of the methacrylates alone. However, UV finishing after the dyeing caused significant decrease in K/S and ${\Delta}E$ due to changed refraction and inherent color of surface coating of the UV curable monomers and APP. Whereas the heat treatment with Pekoflam decreased both color fastness to laundering and sublimation, surprisingly the UV finish of PET fabrics before and after the dyeing increased the color fastness probably resulting from the presence of photopolymerized surface layer on the fabrics.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.354-362
• /
• 2019

In order to apply thermoplastic composites using PETG resin to various industrial fields such as bicycle frames and industrial parts, it is necessary to verify the impact resistance, durability and mechanical properties of the manufactured composite materials. To improve the mechanical properties, durability and impact resistance of PETG resin, an amorphous resin, in this study, compound and injection molding process were carried out using various additives such as TiO2, carbon black, polyolefin elastomer, and PETG amorphous resin. The thermal and mechanical properties of the thermoplastic composites, and the Charpy impact strength. The analysis was performed to evaluate the characteristics according to the types of additives. DSC and DMA analyzes were performed for thermal properties, and tensile strength, flexural strength, and tensile strength change rate were measured using a universal testing machine to evaluate mechanical properties. Charpy impact strength test was conducted to analyze the impact characteristics, and the fracture section was analyzed after the impact strength test. In the case of POE material-added thermoplastic composites, thermal and mechanical properties tend to decrease, but workability and impact resistance tend to be superior to those of PETG materials.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.164-174
• /
• 2016

In this study, dye-encapsulated microcapsules were produced by emulsion polymerization using styrene monomer. The study showed that the average size of microcapsules were $2{\sim}5{\mu}m$ in normal distribution. These microcapsules induced pale yellow(A12) and reddish yellow(B24) color by thermochromic fluoran yellow(dye A) and red(dye B). These microcapsules were changed to dark yellow(A12) and scarlet(B24) color depending on temperature change. The weight of microcapsules decreased by 7% to 11% during the heating ranges from $320^{\circ}C$ to $350^{\circ}C$ implying that the styrene microcapsules had thermal stability upto $300^{\circ}C$.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.304-311
• /
• 2011

For sound absorption and sound insulation in automobile industry, the sound absorption materials based on meltblown nonwovens were prepared by SMS (spunbond-meltblown-spunbond) technique. And the sound absorption coefficient (${\alpha}$) of the meltblown nonwoven, produced with isotatic-polypropylene(PP), was examined for the various processing conditions such as die-to-collector distance(DCD), nonwoven weight(GSM), and air suction conditions. The meltblown nonwoven for sound absorption materials was composed of bulky microfiber web, increasing with increases in weight and DCD. The sound absorption coefficient(${\alpha}$) was excellent as a sound absorption materials of PAD type composed of SMS(spunbond-meltblownspunbond) nonwovens.

• 한국염색가공학회지
• /
• 제20권3호
• /
• pp.39-56
• /
• 2008

A wide variety of materials including aldehydes, cationic agents, alcohols, peroxygens, phenols and chlorinated phenols, metal ions are being employed as biocides. Among three levels for biocidal functions (sanitization, disinfection and sterilization), disinfection is an enough level for antimicrobial textiles. In terms of antimicrobial agents for textile applications, quaternary ammonium salts (QAS), chitosan, metal and metal salts, N-halamine based materials are developed with numerous research and the positive ions of those materials may result in disinfection of microorganisms. Photocatalysts, especially titanium dioxide (titania) produces the hydroxyl radical (${\cdot}\;OH$) which causes inactivation of microorganisms after UV radiation, have been used for antimicrobial applications.

• 기술사
• /
• 제30권6호
• /
• pp.144-152
• /
• 1997

Development of diamond wheel with fine grains and multi-pore structures were newely attempted to be studied in this paper. Wheels, that are employed for the smooth and mirrow finishing of die materials such as tungsten carbide alloy using tool and die materials, must have both performances to remove tool marks efficiently and to contact elastically with curved surfaces. Diamond abrasive grains were bonded firmly by a melamine to prevent the decrease of machining efficiency due to grain sinking within the bond materials. Also, highly foamed structures were developed to increase the flexibility of the wheel, and to induce active self-sharpening by increasing contact pressure between the wheel and work sufaces. In this paper, melamine-bonded diamond wheels are trial manufactured, then the forming method of wheels are explained.

• 한국건설관리학회논문집
• /
• 제9권4호
• /
• pp.84-91
• /
• 2008

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기 질에 대한 인식을 새롭게 하고 있다. 이러한 시대적 흐름에 발맞추어 최근 신축되거나 리모델링 되는 공동주택에는 친환경 실내마감재료가 적용되고 있다. 하지만, 친환경 실내 마감재료는 일반재료에 비해 그 가격이 고가이며, 분양가 상승을 야기한다. 또한 친환경 마감재료 적용으로 인한 분양가 상승은 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부 재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.953-956
• /
• 2007

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기질에 대한 인식을 새롭게 하고 있다. 또한, 최근의 공동주택의 실내 마감재료에 친환경 소재가 적용되고 있으나 그 가격이 고가이므로 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.128-137
• /
• 2019

PURPOSE. The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided design and computer-aided manufacturing (CAD/CAM) materials following thermocycling. MATERIALS AND METHODS. 150 disc-shaped specimens were prepared from three different hybrid materials and divided into five subgroups according to the applied surface polishing techniques. All specimens were subjected up to #4000 grit SiC paper grinding. No additional polishing has been done to the control group (Group I). Other polishing procedures were as follows: Group II: two-stage diamond impregnated polishing discs; Group III: yellow colored rubber based silicone discs; Group IV: diamond polishing paste; and Group V: Aluminum oxide polishing discs. Subsequently, 5000-cycles of thermocycling were applied. The analyses were conducted after 24 hours, 7 days, and 30 days of water immersion. Water absorption and water solubility results were analyzed by two-way ANOVA and Tukey post-hoc tests. Besides, microhardness data were compared by Kruskal-Wallis and MannWhitney U tests (P<.05). RESULTS. Surface polishing procedures had significant effects on water absorption and solubility and surface microhardness of resin ceramics (P<.05). Group IV exhibited the lowest water absorption and the highest microhardness values (P<.05). Immersion periods had no effect on the microhardness of hybrid ceramic materials (P>.05). CONCLUSION. Surface finishing and polishing procedures might negatively affect physical properties of hybrid ceramic materials. Nevertheless, immersion periods do not affect the microhardness of the materials. Final polishing by using diamond polishing paste can be recommended for all CAD/CAM materials.