• Journal of KIISE:Software and Applications
• /
• v.30 no.11
• /
• pp.1025-1036
• /
• 2003

In industry, it is a current trend that systems are developed by using Enterprise JavaBeans(EJB) technology for reducing the cost and the time. Thus, the architecture of EJB is getting more essential to enhance reusability, extensibility and portability of system. However little has been studied in the realm of the practical software architectures for EJB. The architecture has just bean studied in abstract level, but not in concrete level providing the method to substantiate it using the practical J2EE techniques. Just using the EJB technology doesn't guarantee the reusability of the artifacts because EJB specification provides the characteristics and architecture for only fine grained components as session and entity bean. In this paper, we propose the enterprise software architecture for the systems based on EJB and the concrete techniques for implementing that. Also, design patterns of modeling efficient enterprise architecture are represented. By analyzing both the strengths and the weaknesses of suggested design patterns, EJB design patterns which are suitable for each layer of enterprise architecture will be identified. Through the component which design patterns are applied, the architecture can support the optimized relationship between the components. Five techniques for designing components from fine grained to coarse grained based on EJB technology, and architecture design techniques including transaction and assembling techniques are proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.97-109
• /
• 2000

The purpose of this study is to apply 3D computer graphics in fashion design as a creative medium and it attempts to fine out what advantages 3D technique can offer to fashion design. For this purpose, this study, first, tries to develop a 3D digital model in which designer can select design, color , pattern and fabric palette whatever necessary . This study uses of the software named 'Poser of Fractal Design' and the and the 3D digital model comprises four stages ; body modeling, item design (item coordination), color design (color coordination), pattern and fabric design (pattern and fabric coordination). Secondly, this study seeks to accumulate a data base which was produced in the course of case studies, which have applied 3D digital model to design. The outcome of the case studies shows that 3D digital model can enhance designing in the following four aspects. ⅰ) It can give more freedom to designer to try various ideas, revise and modify them, It can also produce random generation. Through this process, the designer test various input and output without damage on fabric after revision and alteration. ⅱ) It can help designers to enhance their accuracy. Since fault in the design developed by the 3D digital model can be detected in advance, designers can make correlation before actual work begins. In the end, designers can express their ideas and intention accurately as well as freely. ⅲ) Since design developed by the 3D digital model can be shared on screen by various actors in the course of priduction such designers , merchandisers, and supervisors, it can help communication between and cut the time of feedback.ⅳ) By using the 3D digital model, designers can work from the begining with awareness of actual outcome their design, since the 3D digital model provide animation, which helps designers to envisage visual changes as they apply various items, colors, pattern and fabrics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.4
• /
• pp.697-701
• /
• 2011

The purpose of this study was to fine proteins, which have significantly different level in plasma between Qi-deficiency and Fire-heat group of Korean Oriental Stroke pattern identification (PI) among Korean stroke patients. Eighteen stroke patients with Qi-deficiency and forty nine patients with Fire-heat, which had critical syndrome of each PI, were participated in this study. Plasma protein pattern were analyzed by SELDI-TOF MS using Q10 strong anion exchange chip and Mass spectral data (m/z) statistically determined. The expression level of proteins, which were different between Qi-deficiency and Fire-heat in the results by SELDI-TOF MS, were confirmed by western blot. As a result of analyzing plasma protein by SELDI-TOF MS, six protein peaks were significantly higher in Fire-heat group than Qi-deficiency group. Two peaks among of them, M15003 and M15745, were respectively identified as hemoglobin alpha and beta in previous study. Expression level of plasma free hemoglobin of Fire-heat group was also confirmed higher in Fire-heat group than in Qi-deficiency group. These findings suggest that plasma free hemoglobin is a candidate for discriminating Qi-deficiency and Fire-heat group according to pattern identification (PI) of stroke.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.268-272
• /
• 2008

$LiFePO_4$ material was synthesized by electrospinning method to obtain optimal particle size($50{\sim}100\;nm$) without carbon coating or ball milling. This material showed an orthorthombic structure with Pnma space group without any impurities, such as FeP or $Fe_2P$, in the XRD pattern. The particle morphology and particle shape were observed by SEM analysis. Li/$LiFePO_4$ cell showed a high initial discharge capacity of 135 mAh/g, at current density of $0.1\;mA/cm^2$ with a cut-off voltage of 2.8 to 4.0V. This cell exhibited a perfect cycle performance over 99.9% cycle retention rate up to 50 cycles.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.8
• /
• pp.598-604
• /
• 1999

This paper describes the research to minimize the film stress and maximize the aspect ratio of photoresist structure, especially about SU-8 for electroplating mold. UV LIGA process using SU-8 allows fabricating high aspect ratio polymer structures. However, it is hard to get fine patterns in the high aspect ratio structures because of high internal stress and difficulty of removing SU-8. The purpose of this paper is to setup the process condition for the obtainment of both low film stress and high aspect ratio and to find design rules that make the pattern be less dependent on stress problem. Firstly, the process of heat treatment and exposure of SU-8 are proposed. These two conditions control the amount of cross-linkage in polymer structure, which is the most important parameter of both pattern generation and remaining stress. Heat treatment is dealed with soft bake and post-exposure-bake. Temperature and time duration of each step are varied with heat treatment condition. Some test patterns are fabricated to evaluate the proposed process. Nickel electroplating is performed with the mold fabricated through the proposed process to confirm the SU-8 as a good electroplating mold.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.1
• /
• pp.28-36
• /
• 2005

In this study, the reflow characteristics of copper thin films which is expected to be used as interconnection materials in the next generation semiconductor devices were investigated. Cu thin films were deposited on the TaN diffusion barrier by metal organic chemical vapor deposition (MOCVD) and annealed at the temperature between 250℃ and 550℃ in various ambient gases. When the Cu thin films were annealed in the hydrogen ambience compared with oxygen ambience, sheet resistance of Cu thin films decreased and the breakdown of TaN diffusion barrier was not occurred and a stable Cu/TaN/Si structure was formed at the annealing temperature of 450℃. In addition, reflow properties of Cu thin films could be enhanced in H₂ ambient. With Cu reflow process, we could fill the trench patterns of 0.16～0.24 11m with aspect ratio of 4.17～6.25 at the annealing temperature of 450℃ in hydrogen ambience. It is expected that Cu reflow process will be applied to fill the deep pattern with ultra fine structure in metallization.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.309-314
• /
• 1996

We found that SOG which had been used in plarnarization of VLSI circuit fabrication at present could be used as a resist material for AFM lithography. In this experiment on the basis of previous studies, we improved the process flexibility by controlling the coating film thickness, etching time, etching selectively and proper applied voltage on the pattern size to apply for practical VLSI lithography process. We obtained pattern with the current of 5 nA at 60 V. The line width was 800 $\AA$. With the developed flexibility of SOG as a resist material, AFM lithography will be a expedient technique in the next generation DRAM fabrication.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.170-174
• /
• 2008

The strains of Salmonella othmarschen and Norovirus isolated from outbreak A, the funeral ceremonies incidents in Ouri-shi of Oyeonggido in, 2007, were subjected to genotyping by using PFGE and extraction of RNA by using RT-PCR. 24 Salmonella othmarschen were isolated from 37 cases (patients 12 cases, cookers 4 cases, foods 7cases, knife, kitchen board, dish towel 4 cases, etc) and PFGE patterns showed that 22 strains isolated from the same incident were almost of the same pattern and 2 strains exhibited 50% of the pattern. Antimicrobial susceptibility patterns were such that there were 22 case susceptibility patterns and 2 case resistance patterns (strain 4: AM, CF, CIP, NA, TE TIC and strain 13: CF, CZ). Norovirus G1 (1case), Norovirus G2 (7cases), Norovirus G1,G2 (1case) were detected by using RT-PCR. The fine typing ability and reliability of PFGE and BioNumerics are helpful for establishing out the foodborne pathogens of outbreaks.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.444-449
• /
• 2005

An 11-year-old female, Golden retriever dog with a history of solid mass on the chest wall was referred to Veterinary Medical Teaching Hospital, Seoul National University. The mass was firm on palpation. A soft tissue opacity mass with calcified foci around the right 7th rib and extrapleural patterns around the right 5th rib and 7th rib was shown on thoracic radiographs. The mass of the 7th rib has a mixed-echo pattern with a strong acoustic shadowing and internal vascular signals on ultrasonography. On CT scan, the mass showed contrast enhancement effect, expansive pattern of intrathoracic and extrathoracic legion around costochondral junction. The 7th rib appeared mildly lytic. The mass of the 5th rib had a soft tissue swelling without bone lysis. The mass was diagnosed as a sarcoma by fine needle biopsy. Therefore, the mass was surgically removed. Subsequent histopathological study found the mass was chondrosarcoma.