• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1268-1270
• /
• 1994

Fine lithographic technology in a submicron design regime is necessary for the fabrication of VLSI circuits. In such lithography, fine pattern delineation is performed by electron beam, ion beam and X-ray lithography instead of photolithography. Therefore, the new resist materials and development method have been required. So, we are investigating another positive E-beam resists which have high sensitivity and dry etching resistance, Plasma co-polymerized resist was prepared using an interelectrode gas-flow-type reacter. Methymethacrylate, tetramethyltin and styrene were chosen as the monomer to be used. The delineated pattern in the resist was developed with gas-flow-type reactor using an argon and 02 as etching gas. We studied about the effects of discharge power and mixing rate of the co-polymerized thin :film. The molecular structure of thin film was investigated by ESCA and IR, and then was discussed in relation to its quality as a resist.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.891-896
• /
• 2004

'Coil' occupies very much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(fine pattern coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(printed circuit board coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things to reduce the vibration of sub-resonance and to assure the DC sensitivity among the performances of asymmetric optical pick-up actuator with PCB-Coil.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.187-199
• /
• 2009

Recently, the quality and design of the children's wear is being improved remarkably. Following the trend, the need for the research on the pattern making of children's wear is growing. At first, we tried to find out how the industry is doing the pattern making job through interview. Results are as follows. The target age ranges from 5 to 11 years old. For the sample size of pattern making, 7 years of age is preferred. It is not usual to develop the design pattern from the bodice block pattern. Instead, they use middle block pattern for each item, such as blouse, shirt, pants, skirt or jacket. Starting from these middle block pattern, they prepare individual designs. With the results, the aim of the research became to develop one of most frequently used middle block pattern. The blouse block pattern was selected for that purpose. To look into the existing patterns, we selected 4 methods, i.e. NM-method, T-method, O-method, E-methods. Theses patterns were compared through wearing test for the evaluation of comfort and fit using trial garments. The results indicated the NM-method was best among them. Specially waist line position, shoulder shape and size allowance was adequate. Alteration and adjustment of pattern draft was made onto the NM-method. Allowances for the bust circumference, across chest, across back and depth of arm was adjusted for better comfort as well as fine fit. Sidelines of the bodice and the underarm seam of the sleeves were curved for styling. After another wearing test, the final pattern was suggested as a blouse block pattern for 7 years old girl.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.137-147
• /
• 2008

This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.

• Current Optics and Photonics
• /
• v.1 no.1
• /
• pp.23-28
• /
• 2017

The laser has been regarded as the potential illumination source for the next generation of projectors. However, currently the major issues in applying the laser as an illumination source for projectors are beam shaping and laser speckle. We present a compact solution for both issues by using a vibrating diffractive optical element (DOE). The DOE is designed and fabricated, and it successfully transforms the circular Gaussian laser beam to a low speckle contrast uniform rectangular pattern. Under a vibration frequency of 150 Hz and amplitude of $200{\mu}m$, the speckle contrast value is reduced from 67.67% to 13.78%, and the ANSI uniformity is improved from 24.36% to 85.54%. The experimental results demonstrate the feasibility and potential of the proposed scheme, and the proposed method is a feasible approach to the miniaturization of laser projection display illumination systems.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.533-542
• /
• 2007

The general characteristics of fine particle and meteorological analysis of high $PM_{10}$ concentration day which was over $100{\mu}g/m^3$ in busan were investigated for period of 2002 to 2006. Annual mean concentration including Asian dust day was $68.7{\mu}g/m^3$ in 2002, $54.6{\mu}g/m^3$ in 2003, $60.4{\mu}g/m^3$ in 2004, $58.3{\mu}g/m^3$ in 2005 and $58.8{\mu}g/m^3$ in 2006, respectively. Seasonal mean concentration was $73.4{\mu}g/m^3$ in Springtime, $56.8{\mu}g/m^3$ in Summertime, $55.5{\mu}g/m^3$ in Wintertime and $54.4{\mu}g/m^3$ in Falltime, respectively. Mean concentration for land use was 69.2 $37.0{\mu}g/m^3$ in industrial area, 64.2 $35.5{\mu}g/m^3$ in rural area, 62.6 $34.4{\mu}g/m^3$ in commercial area and 55.3 $33.8{\mu}g/m^3$ in residential area, respectively. Frequency of synoptic pattern for high $PM_{10}$ concentration day was 18 days(16.7%) in I type, 27 days(25.0%) in II type, 10 days(9.3%) in III type, 5 days(4.6%) in IV type, 13 days(12.0%) in V type and 29 days (26.9%) in VI type, respectively. Frequency of long range transport sector for high $PM_{10}$ concentration day was 9 days(8.3%) in I type, 64 days(59.5%) in II type, 34 days(31.5%) in III type, 1 days in IV type, 0 days, respectively.

• The Korean Journal of Cytopathology
• /
• v.5 no.1
• /
• pp.74-78
• /
• 1994

A case of retroperitoneal paraganglioma is presented with fine needle aspiration cytologic features. A 57-year-old woman complained of abdominal discomfort and left flank pain for 2 years. The abdominal CT scan revealed an ovoid mass left to the abdominal aorta. Percutaneous fine needle aspiration was performed from the mass. The smear revealed cellular sheets or groups on hemorrhagic background. The tumor cells were ovoid, round to spindle shaped with mild to moderate cellular pleomorphism. The nuclei were round to ovoid and had evenly dispersed chromatin and small nucleoli. The cytoplasm was amphophilic, finely granular and poorly defined. Cells having large or spindle nuclei were quite frequently observed, however, mitosis was not present The cytologic findings suggested paraganglioma, but the frequent spindle cell pattern and the pleomorphism made it difficult to exclude other endocrine tumors and sarcomas. The clinical, histological and ultrastructural findings as well as cytologic findings contributed to confirmatory diagnosis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.159-169
• /
• 2004

Sedimentation and depositional pattern of the fine-grained sediments in the southeastern inner shelf of Korea were studied using a very high-resolution seismic profiles and sediment data. The recent mud deposits up to 45 m thick are distributed in the inner shelf forming a nearshore belt from the eastern part of Geoje Island to off the Pohang along the coast. The sediment in this area consists of homogeneous mud with mean grain size between $8.6\;to\;5.3\phi$ and does not show any distinct variability It gradually becomes finer and well sorted northeastward along the coast. Sediments normally appear as structureless massive mud but X-radiographs show that some bioturbation and faint lamination are present. The sediments accumulate at a rate of 0.18-0.44 cm/yr and the rate coincides well with the long-term (a 1000-year scale) accumulation based on very high-resolution seismic data. Distribution of wet bulk density and velocity shows a gradual increase from the southeastern part of Ulsan to off Pohang, whereas porosity shows a reverse pattern. Correlations between velocity and porosity/mean grain size are different from other regions compared, due to the difference of sediment texture and sedimentary environment. The recent shelf deposits are seismically characterized by three distinct facies: 1) well-stratified (near the river mouth), 2) semi-transparent (eastern part of Geoje Island), and 3) transparent (off Ulsan). The results suggest that fine-grained sediment derived from rivers, forming a nearshore mud belt, have been transported northeastward by the northeastward-flowing coastal current.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.109-114
• /
• 2016

This study presents the optimal hardness range for a coated layer of a workpiece when the diamond tool cuts the corner-cube pattern on the coated plates using an ultra-precision diamond-turning machine. Two kinds of coated plates, which have the hardness range of 211~328 Vickers hardness, are used on the first experiments. The form accuracy for the corner-cube pattern could be achieved through the following experiments using the accumulated thin copper plates in second experiments, having optimal 265~275 Vickers hardness based on the basic first experiments without tool wear. When the number of machining adjustments was increased to seven times, having machining depth was reduced successively in second experiment, a fine surface could be achieved without tool wear.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.686-692
• /
• 2012

Solid free-form fabrication (SFF) technology was developed to fabricate three-dimensional (3D) scaffolds for tissue engineering (TE) applications. In this study, we developed a polymer deposition system (PDS) and created 3D microstructures using a bioresorbable polycaprolactone (PCL) polymer. Fabrication of 3D scaffolds by PDS requires a combination of several devices, including a heating system, dispenser, and motion controller. The system can process a polymer with extremely high precision by using a 200 ${\mu}m$ nozzle. Based on scanning electron microscope (SEM) images, both the line width and the piled line height were fine and uniform. Several 3D micro-structures, including the ANU pattern (a pattern named after Andong National University), $45^{\circ}$ pattern square, frame, cylindrical, triangular, cross-shaped, and hexagon, have been fabricated using the polymer deposition system.