• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.103-108
• /
• 2022

Various studies have been conducted on cloud observation using all-sky images acquired with a wide-angle camera system since the early 21st century, but it is judged that an automatic observation system that can completely replace the eye observation has not been obtained. In this study, to verify the quantification of cloud observation, which is the final step of the algorithm proposed to automate the observation, the cloud distribution of the all-sky image and the corrected image were compared and analyzed. The reason is that clouds are formed at a certain height depending on the type, but like the retina image, the center of the lens is enlarged and the edges are reduced, but the effect of human learning ability and spatial awareness on cloud observation is unknown. As a result of this study, the average cloud observation error of the all-sky image and the corrected image was 1.23%. Therefore, when compared with the eye observation in the decile, the error due to correction is 1.23% of the observed amount, which is very less than the allowable error of the eye observation, and it does not include human error, so it is possible to collect accurately quantified data. Since the change in cloudiness due to the correction is insignificant, it was confirmed that accurate observations can be obtained even by omitting the unnecessary correction step and observing the cloudiness in the pre-correction image.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.345-352
• /
• 2009

This study utilized 332,625 records of linear type scores consisting for 15 primary traits, 22,175 final score and 84,612 pedigree information of 22,175 Holstein cows from 1993 to 2007 in Korea to estimate genetic parameters for 16 type traits. Genetic and error (co)variances between two traits selected from 16 traits were estimated using bi-trait pairwise analyses with DFREML package. The estimated heritabilities for stature (ST), strength (STR), body depth (BD), dairy form (DF), rump angle (RA), thurl width (TW), rear legs side view (RLSV), foot angle (FA), fore udder attachment (FUA), rear udder height (RUH), rear udder width (RUW), udder cleft (UC), udder depth (UD), front teat placement (FTP), front teat length (FTL) and final score (FS) were 0.31, 0.21, 0.25, 0.10, 0.29, 0.19, 0.09, 0.06, 0.12, 0.13, 0.12, 0.08, 0.26, 0.20, 0.28 and 0.15, respectively. ST had the highest positive genetic correlation with BD (0.90), while RLSV had the highest negative genetic correlation with FA (-0.56). RA had negative genetic correlation with most udder traits (-0.17~-0.02). Especially, RUW had the higher positive genetic correlation with STR (0.60), BD (0.62), and TW (0.49), however, UD had the higher negative genetic correlation with STR (-0.40) and BD (-0.40). FTL had negative genetic correlation with FUA, RUH, RUW, UC and UD. FS had positive genetic correlation with UC, UD and FTP (0.12, 0.18 and 0.20). However, additional research is needed on the use of these parameters in the genetic evaluation because estimated genetic and error variance-covariance matrices were not positive definite.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.101-135
• /
• 1968

As physical fitness measured was muscle strength (hand grips, leg extention, back lift, and arm pull and thrust), skinfold thickness (5 different sites), circulatory function (resting heart rate and blood pressure), speed (kinesiological analysis during 100m sprint, record, maximal and final speed), motor function (50 meter dash, ball throwing, standing broad jump, and pull-ups), maximal aerobic power (maximum oxygen intake by field running method), muscle power (leg and arm by inertia ergometer), and general endurance (maximum endurance running time on the treadmill at the speed of 5 MPH and grade of 15.5%) of 1131 Korean children (boys 572, girls 559) aged of 6 to 17 years, who were randomly sampled from 24 primary, middle and high schools at the two districts of Seoul and KyungKi. The results are summarized as follows: 1) The status (height and weight) of the children was almost same as that of the previously reported Korean and Japanese children of same ages. 2) Muscle strength was a gained linearly with geting age in the boys and girls but there was a little improvement in girls aged of 13 years or more. 3) The mean skin fold thickness was increased linearly with geting ages in both sexes, but the girls from 12 to 17 years of age were increased rapidly, and maximum value was 17mm, while boys was 7.0 mm. 4) In the circulatory function, the resting heart rate was decreased, but the blood pressure was increased with ages in both sexes within the normal limits. 5) The maximum and final speed during 100 meter sprint increases with age in boys but girls who are 12 years old or older, were not improved any mere. The patterns of running were same in both sexes, and maximum speed reached at about 30 meters from starting line. 6) The motor function was increased with age in both sexes, but there was no improvement in 12 years of age or older girls. More over records of all functions except standing broad jump was less than those of Japanese in the same age, respectively. 7) The maximum oxygen intake (MOI) was increased considerably with ages and maximum values were 2.93 L/min (boys) and 2.09 L/min (girls) at the age of 17years. This result was almost same as that of the Japanese and Easter Island population, but the value was lower than that of Europe. The average of the maximum oxygen intake per kg body weight per minute from 9 to 17 years of age were around 53 ml in the boys and 42 ml in the girls. 8) Muscle power was increased linearly with ages in boys while there was relatively a little increment in girls. The maximum values of leg muscle in boys and girls at the 17 years of age were 0.168 and 0.088 horse power, respectively. 9) The maximum endurance running time was increased considerably from the age of 9 in boys, while there was no improvement in girls. The maximum values were 6.0 min and 1.8 min, respectively.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.44-55
• /
• 2007

Objective: Previous studies have reported that morphological features of the first cervical vertebra (atlas) have been associated with mandibular growth direction. The purpose of this study was to show the possible positional and morphological changes of the Atlas from activator treatment in Class II malocclusion patients. Methods: Lateral cephalometric radiograph tracings were made at initial, middle and final stages of treatment. Angular and linear measurements of skeletal and morphological features were measured on the anatomical landmarks and reference planes. Results: The skeletal effects of activator treatment on Class II malocclusion patients were evident on ramal height, body length, effective body length, ANB, and overjet. Clockwise rotation of the long axis of the Atlas was found in Group 1, but there was no inclination change of the Atlas in groups 2 and 3. There was no significant correlation between anterior and posterior positions of the atlas or morphological change in all groups. - except for posterior movements of the Atlas found in group 1. Conclusion: Clockwise rotation of the atlas axis resulted from activator treatment in Cl II malocclusion patients. Change in atlas axis can be thought of as an indicator for success of activator treatment.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.375-383
• /
• 2001

We extracted sea surface heights(SSH) from the TopexJPoseidon(T/P) radar altimeter data to compare with fhe SSH estimated from in-situ lide gauges(T/G) at Ulleungdo, Pohang, and SockcholMucko sites. Selection criteria such as wet/dry troposphere, ionosphere, and ocean tide were used to estimate accurate SSH. For time series analysis, the one-hour interval tide gauge SSHs were resampled al lO-day interval of the satellite SSHs. The ocean tide model applied in the altimeter data processing showed periodic aliasings of 175.5 day, 87.8 day, 62J day, 58.5 day, 49.5 day and 46.0 day, and, hence, the ZOO-day filtering was applied to reduce these spectral noises. Wavenumber correlation analysis was also applied to extract common components between the two SSHs, resulting in enhancing the correlation coefficient(CC) dramatically. The original CCs between the satenite and tide gauge SSHs are 0.46. 0.26, and 0.]5, respectively. Ulleungdo shows the largest cc bec;luase the site is far from the coast resulting in the minimun error in the satellite observations. The CCs were then increased to 0.59, 030, and 0.30, respectively, after 200.day filtering, and to 0.69, 0.63. and 0.59 after removing inversely correlative components using wavenumber correlation analysis. The CCs were greatly increased by 87, 227, and 460% when the wavenumber correlation analysis was followed by 2oo-day filtering, resulting in the final CCs of 0.86, 0.85, 0.84, respectively. It was found that the best SSHs were estimated when the two methods were applied to the original data. The low-pass filtered TIP SSHs were found to be well correlated with the TIG SSHs from tide gauges, and the best correlation results were found when we applied both low-pass filtering and spectral correlation analysis to the original SSHs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.597-603
• /
• 1997

Orostachys japonicus, Wasong as herb medicine, has been artificially cultivated as an anti-tumor medicinal. The experiment was carried out to examine the effect of natural daylength as control or night-break treatment (NB) imposed at June 20, July 18 or Aug. 15 on its growth, dry weights of leaf and bract, stem, floret and root, and morphological characters including bolting and floret flowering. After a plant was grown in a 15cm plastic pot containing a 2 : 1 soil : peat moss mixture on May 23, three treatments with above differing night-break had been imposed around midnight up to Nov. 7. The plants were sampled 3 times at the same day forced to night-break and then done 6 times by 2-week interval after the final NB. Plant height and inflorescence length of all the NB increased with delayed NB but declined in comparison with the natural daylength. No. of leaves including bracts showed similar response to plant height although NB given before July 18 showed less leaves and bracts. Stem diameters of NB were continuously increased to middle Sept. to middle Oct. while that of natural daylength decreased after middle Oct. Natural daylength or NB given on Aug. 15 had greater fraction, shoot and total dry weights resulting from increment of leaf and bract up to Aug. or of floret, stem and root after Sept. The earlier NB, the later formation of florets and the less number of flowering florets whereas in natural daylength florets on inflorescence begun to be formed from middle Sept. were sharply increased up to middle Oct. when all the plants were flowered. Bolting was not formed in the plant of the earliest NB of June 20, and thereby no anthesis of florets up to early Nov. It was concluded that year-round cultivation of Orostachys japonicus plants was possible through controlling the NB timing because its bolting and flowering of florets separately occurred.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.2
• /
• pp.128-141
• /
• 2012

This study focused on the historic documents known as $deungnok$, records created during preparations for royal events in the $Joseon$ Dynasty, rather than the often cited $uigwe$, the documents describing the Royal Protocol of the $Joseon$ Dynasty. As a reference to the food served at royal banquets, the $deungnok$ can enhance our understanding of royal banquet foods. Seven specimens of $deungnok$ describing royal banquet foods are currently in existence, created during preparations for royal events by the agencies in charge of food, the $Saongwon$ and $Jeonseonsa$. Owing to the nature of their authorship, the details recorded in these $deungnok$ hold great value as important resources for the study of royal banquet cuisine. $Naeoejinyeon$-$deungnok$, which documented an $oejinyeon$ banquet held at the $Junghwajeon$ Pavilion in November 1902, was somewhat disorganized and fragmented. $Jinyeonuigwe$ was more inclusive and well-summarized, since the former were progress reports to the King during banquet preparations that listed various items separately, such as dishes for each table setting and the kinds of flower pieces, and thus did not present a complete picture of all the details as a whole. The latter, on the other hand, were final reports created upon completion of a banquet, and contained more comprehensive records not only of the $chanpum$ (the menu of dishes served), but also the sorts of tableware and tables, floral arrangements, location, scale, and installation date of the $sukseolso$ (temporary royal kitchens for banquets). They also offer a more effective summary by simplifying details duplicated in identical table settings. Nevertheless, the $Naeoejinyeon$-$deungnok$ recorded some facts that cannot be gleaned from the $Jinyeonuigwe$, including the height of some dishes presented in piled stacks, as well as the specific names of dishes and their ingredients. The comparative study of the historic records in the $deungnok$ and $uigwe$ will be helpful in identifying and understanding the specific foods served at royal banquets. The $oejinyeon$-$seolchando$ diagrams in $Naeoejinyeon$-$deungnok$ depict the table settings for the King and the Crown Prince. The two diagrams contain large rectangles divided into three sections. In each section are similar-sized circles in which the names of dishes and the titles for table settings are recorded. From these records we can see that the arrangements of the table settings for the King and the Crown Prince are similar. The relationships and protocols shown in the arrangement of dishes and table settings for the King and the Crown Prince at royal banquets in the $Seolchando$ appear to be consistent. By comparing the two references, $deungnok$ and $uigwe$, which recorded the dishes served at royal banquets, the author was able to determine the height of some foods served in stacked arrangements, the names of $chanpum$, the ingredients used, and the configuration of the $chanpum$. The comparative review of these two written records, $deungnok$ and $uigwe$, will be helpful for a proper understanding of the actual food served at royal banquets.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Clinical and Experimental Pediatrics
• /
• v.51 no.6
• /
• pp.634-639
• /
• 2008

Purpose : There has been considerable disagreement regarding the most appropriate dosage of gonadotropin-releasing hormone agonist in cases of central precocious puberty. The aim of this study was to determine the appropriate dosage for suppression of the puberty in girls with central precocious or early puberty. Methods : Twenty-two girls with early puberty were randomly subjected to 3 types of dosages of leuprolide acetate for at least 6 months. The number of cases in groups 1, 2, and 3 were 7, 7, and 8, and dosages were 70, 90, and $110{\mu}g/kg/-month$, respectively. Height, weight, bone age, Tanner stage of breast development, and serum levels of LH, FSH, estradiol, and progesterone were measured before treatment and after 6 months of treatment. The number of cases of puberty suppression was compared using a modified puberty suppression score with a nonparametric chi-square test. Results : There were no significant differences of chronologic and bone ages among the groups. There was a significant decrease in height SDS gain after 6 months in group 3 (P<0.05) compared with groups 1 and 2. Serum levels of LH, FSH, estradiol and progesterone were all significantly decreased after treatment in all 3 groups (P<0.05). The number of cases of puberty suppression in each group were 4 (57%), 5 (71%), and 8 (100%). There was a significantly increased proportion of suppression of puberty in group 3 (P<0.05). Conclusion : It was necessary to use a higher dose of gonadotropin-releasing hormone agonist to suppress early puberty in girls; however further longitudinal study will be needed for their prognosis of final adult height.