• Title/Summary/Keyword: Final height

Search Result 376, Processing Time 0.031 seconds

Utilization of $CO_2$ Influenced by Windbreak in an Elevated Production System for Strawberry (딸기 고설재배시설에서의 이산화탄소 농도 유지를 위한 방풍막 설치 효과)

  • Kim, Y.-H.;Lee, I.-B.;Chun, Chang-Hoo;Hwang, H.-S.;Hong, S.-W.;Seo, I.-H.;Yoo, J.-I.;Bitog, Jessie P.;Kwon, K.-S.
    • Journal of Bio-Environment Control
    • /
    • v.18 no.1
    • /
    • pp.29-39
    • /
    • 2009
  • The influence of windbreak to minimize the ventilation velocity near the plant canopy of a greenhouse strawberry was thoroughly investigated using computational fluid dynamics (CFD) technology. Windbreaks were constructed surrounding the plant canopy to control ventilation and maintain the concentration of the supplied $CO_2$ from the soil surface close to the strawberry plants. The influence of no windbreak, 0.15 m and 0.30 m height windbreaks with varied air velocity of 0.5, 1.0 and 1.5 m/s were simulated in the study. The concentrations of supplied $CO_2$ within the plant canopy of were measured. To simplify the model, plants were not included in the final model. Considering 1.0m/s wind velocity which is the normal wind velocity of greenhouses, the concentrations of $CO_2$ were approximately 420, 580 and 653 ppm ($1{\times}10^{-9}kg/m^3$) for no windbreak, 0.15 and 0.30 m windbreak height, respectively. Considering that the maximum concentration of $CO_2$ for the strawberry plants was around 600-800 ppm, the 0.30 m windbreak height is highly recommended. This study revealed that the windbreak was very effective in preserving $CO_2$ gas within the plant canopy. More so, the study also proved that the CFD technique can be used to determine the concentration of $CO_2$ within the plant canopy for the plants consumption at any designed condition. For an in-depth application of this study, the plants as well as the different conditions for $CO_2$ utilization, etc. should be considered.

Clinical Characteristics of precocious puberty girls and Comparison Analysis of GnRH Test results with Diagnosis type (성조숙증 여아들의 임상적 특징 및 진단별 성선자극호르몬 분비호르몬 GnRH (Gonado Tropin Releasing Hormone) 검사결과의 비교분석평가)

  • Kim, Jung-In;Kwon, Won-Hyun;Moon, Ki-Choon;Lee, In-Won
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.20 no.2
    • /
    • pp.54-61
    • /
    • 2016
  • Purpose Precocious Puberty is defined as the development of secondary sexual characteristics in girls younger than 8 years, and boys 9 years. Cause premature closure of the epiphysis is a disease that eventually decreases the final adult height. In this study, we retrospectively analyzed to evaluate the diagnostic difference the GnRH (Gonado-tropin-releasing Hormone) stimulation test results with medical records of precocious puberty in girls. Materials and Methods From February 2015 to December 2015 it was enrolled in the girls 118 people who visited the Seoul National University Bundang Hospital, Pediatrics, Endocrinology Internal Medicine. True precocious puberty group (n=57), early puberty group (n=39), were divided into Premature thelarche (n=22) group. A Tanner stage, chronological age, bone age, height, body weight for each group was determined by examining the mean${\pm}$standard deviation. GnRH test result was compared LH (Basal, 30 min, 45 min, 60 min), FSH (Basal, 30 min, 60 min) for each group, Each group LH, FSH Peak value distribution, the mean${\pm}$standard deviation was calculated for the peak LH/LH basal ratio, peak LH/Peak FSH ratio. The significance probability (P-value) between the value of each third group was determined. Results The average height of the true precocious puberty group $131{\pm}14.85$, the mean weight was $28.80{\pm}4.93$, the average chronological age $7.1{\pm}0.81$, the mean bone age was $9.9{\pm}0.9$, The average height of early puberty group was $134{\pm}5.10$, the average weight $28.50{\pm}4.43$, the average chronological age $8.05{\pm}0.03$, the mean bone age was $10.0{\pm}0.62$, The average height of Premature thelarche $129{\pm}6,01$, the average weight was $28.65{\pm}5.98$, the average chronological age $7.02{\pm}0.58$, the mean bone age was $8.04{\pm}1.29$. There was no significant difference when compared to the height and weight. There was a significant difference between the groups in the chronologic age and bone age difference (P <0.0002) True precocious puberty group showed peak LH levels at 30'(82.5%), 45'(12.3%), 60'(5.3%), in Peak FSH 30'(8.8%), 60'(91.2%). Early Puberty group showed high values in Peak LH at 30'(79.5%), 45'(17.9%), 60'(2.6%), in peak FSH levels at 30'(7.7%), 60'(92.32%). In Premature thelarche Group it showed the Peak LH levels at 30'(30%), 45'(59%), 60'(9.09%), Peak FSH levels at 30'(0%) 60'(100%). When compared with the The Peak LH/basal LH ratio, True precocious puberty group was $19.09{\pm}17.15$, early puberty group was $15.23{\pm}10.88$, Premature thelarche group showed significant differences between the three groups as $4.93{\pm}4.36$.(P <0.0001) LH Peak/FSH Peak ratio, true precocious puberty group was $1.222{\pm}0.77$, early puberty group was $1.34{\pm}1.23$, Premature thelarche group showed significant differences between the three groups as $0.3{\pm}0.09$(P <0.0001) Conclusion In order to diagnose the true precocious puberty have a diagnostic value when the LH peak after GnRH stimulation is increased by more than two to three times compared to baseline or a predetermined level or more than 5~10 IU/L increases. GnRH Test is a test for a long time and the patient discomfort due to repeated blood sampling, but the hypothalamus-pituitary gland- gonad axis activity evaluate and is the most basic accurate test in the differential diagnosis of precocious puberty disorders.

  • PDF

Effect of Production In Vitro Embryo with Frozen-thawed Semen using AndroMed Extender in Korean Black Cow Semen (AndroMed를 이용한 흑우 동결 정액으로 체외수정란 생산 효과)

  • Cho, Sang-Rae;Choi, Sun-Ho;Choe, Chang-Yong;Son, Jun-Kyu;Kim, Jae-Bum;Kim, Sung-Jae;Son, Dong-Soo;Kim, Hyun-Jong
    • Journal of Embryo Transfer
    • /
    • v.24 no.3
    • /
    • pp.207-212
    • /
    • 2009
  • The aim of present experiment was to examine commercial synthetic extender(AndroMed) for semen cryopreservation of Korean Black Bull. Semen was collected from a Korean Black Bull using an artificial vagina and transported to the laboratory. The semen was diluted 1:1 by AndroMed. The pellect was diluted to final sperm concentration of $5{\times}10^5/ml$ by doubling in every 10 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 1 hr at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm of liquid nitrogen for 5 minutes, above 5 cm for 10 minutes and above 10 cm for 10 min. And then the frozen straw was plunged to $LN_2$. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. Hanwoo semen was used as KPN (Korea Proven Bull Number) in this experiment. The survival rates was significantly higher in fresh semen than frozen semen ($80{\pm}14%\;and\;43{\pm}11%$). However, the motility rates was similar (80.7% and 66.4%). The survival and motility rates were higher in 5cm, 10 min treatment group than the other two groups in straw-located height and duration above $LN_2$ ($50{\pm}14%$ and 70.7% vs, 33.18% and $65{\pm}7%$ vs, 30.14% and 65.7%, respectively). The development rates to cleavage was higher in Black Cow than Hanwoo semen (62.2%, 64.4%), However, The development rates to blastocyst was higher in Hanwoo than Black cow semen (25.9%, 23.0%). In conclusion. The present results that acceptable fertilization and cryopreservation could be obtained by in vitro fertilization with frozen-thawed semen using a synthetic semen extender (AndroMed).

Growth and Yield as Affected by Controlled Crowns of the New Ever-bearing Strawberry 'Goha' in Highlands (신품종 사계성 딸기 '고하'의 고랭지 여름재배 시 관부수와 화방제거에 따른 생육 및 수량)

  • Lee, Jong Nam;Kim, Hye Jin;Kim, Ki Deog;Yoo, Dong Lim;Im, Ju Sung;Yeoung, Young Rok
    • Horticultural Science & Technology
    • /
    • v.32 no.1
    • /
    • pp.41-45
    • /
    • 2014
  • This study was conducted to investigate the effects of crown numbers on growth and yield of ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) 'Goha' cultivar. Strawberry seedlings were planted with $55{\times}30cm$ distance on April 29, and the randomized block experimental was designed by putting the crown numbers by 1, 3, 5 and crown-unremoved as the control. At the early growth stage, as the numbers of crown decreased, the size of leaf became larger and inflorescence diameter became thicker. Plant height became higher as the number of crown increased at the final harvesting time. Fresh weight of crown-unremoved plants was 118 g, showing 77.2 g higher than that of plants with one crown. Numbers of the developed inflorescence of plants with five crowns and crown-unremoved was 20.1, whereas 6.8 of plants with one crown, resulted in 13.3 more crowns. However, crown number did not significantly affect the fruit quality. As the crown number increased, the average fruit weight was lighter and the marketable fruit rate was shown to decrease significantly. The marketable yield of crown-unremoved plants was $17,372kg{\cdot}ha^{-1}$, showing 68% higher than plants with one crown. Therefore, crown management without thinning crowns was recommended and inflorescence thickness less than 3 mm should be removed for successful production of ever-bearing strawberry 'Goha' cultivar during summer season.

Study on Structure Visual Inspection Technology using Drones and Image Analysis Techniques (드론과 이미지 분석기법을 활용한 구조물 외관점검 기술 연구)

  • Kim, Jong-Woo;Jung, Young-Woo;Rhim, Hong-Chul
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.6
    • /
    • pp.545-557
    • /
    • 2017
  • The study is about the efficient alternative to concrete surface in the field of visual inspection technology for deteriorated infrastructure. By combining industrial drones and deep learning based image analysis techniques with traditional visual inspection and research, we tried to reduce manpowers, time requirements and costs, and to overcome the height and dome structures. On board device mounted on drones is consisting of a high resolution camera for detecting cracks of more than 0.3 mm, a lidar sensor and a embeded image processor module. It was mounted on an industrial drones, took sample images of damage from the site specimen through automatic flight navigation. In addition, the damege parts of the site specimen was used to measure not only the width and length of cracks but white rust also, and tried up compare them with the final image analysis detected results. Using the image analysis techniques, the damages of 54ea sample images were analyzed by the segmentation - feature extraction - decision making process, and extracted the analysis parameters using supervised mode of the deep learning platform. The image analysis of newly added non-supervised 60ea image samples was performed based on the extracted parameters. The result presented in 90.5 % of the damage detection rate.

The Agricultural Utilization of Daecheong Lake Sediments and Algae (대청호(大淸湖) 저니(底泥) 및 조류(藻類)의 농업적(農業的) 활용(活用) 연구(硏究))

  • Chang, Ki-Woon;Lim, Jae-Shin;Lee, In-Bog
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.27 no.2
    • /
    • pp.111-116
    • /
    • 1994
  • These studies were carried out to investigate the possibility on the agricultural utilization of lake sediment collected in the Daecheong Lake. Several parameters to estimate the degree of maturity of compost by windrow system were tested during a 50 day periods, and the results were as follows : During the composting of Daecheong Lake sediment, C/N ratio decreased gradually from 18.9 at the beginning to 13.1 at the final, while CEC increased from 33.5me/100g to 62.5me/100g. The temperature of lake sediment pile was the highest as $52^{\circ}C$ at 15th day and then decreased slowly until $30^{\circ}C{\sim}40^{\circ}C$ after 50 days. The results may be suggested that Daecheong Lake sediment compost reaches an acceptable level of stability after about 50 days. In order to know the effect of the Lake sediment and its compost on the growth of tomato(Lycopersicum esculentum M.), pot experiments were performed. The appiication of lake sediment(AS) itself, sediment organic fertilizer(SOF), and NPK mixed with sediment organic fertilizer(NSF) was more effective for tomato plant height, fresh and dry weight, and chlorphyll content than those of control treatment. Also, the lake sediment compost improved the physico-chemical properties of soil such as pH, total carbon, total nitrogen, available phosphorous and CEC.

  • PDF

Surgical Repair of Achilles Tendon Rupture by Minimal Incision Technique (최소 절개 기법에 의한 아킬레스건 파열의 수술적 봉합술)

  • Jung, Hong-Geun;Paik, Ho-Dong
    • Journal of Korean Foot and Ankle Society
    • /
    • v.9 no.2
    • /
    • pp.173-178
    • /
    • 2005
  • Propose: There have been many debates about the ideal surgical technique for acute Achilles tendon rupture. The purpose of this study is to review and analyze the clinical outcome of the acute Achilles tendon ruptures that had been repaired by indirect suture technique with minimal incision that utilized an instrument called Achillon (Newdeal, France). Materials and Methods: This study is based on the 14 cases (14 patients) of acute Achilles tendon total ruptures that have been repaired by minimal incision technique utilizing Achillon instrument from June 2003 to December 2004. Two cases were reruptured before 8 weeks and repaired again using Krackow suture which left 12 feet for postoperative functional evaluation with at least 6 months of follow-up. Ten cases were men and average age at time of injury was 34.4 (26-49) years. The time from injury to surgery was an average of 4.5 (1-9) days and the postoperative evaluations were done by an Arner-Lindholm scale and AOFAS score. The ability to return to original work and sports activities as well as patient satisfaction were also evaluated. Results: The follow-up period was averaged for 13.2 (6-24) months. Seventy-one percent of cases were ruptured during sports activities. The ruptured level was the average of 5.1 cm (3.2-8 cm) above calcaneal attachment and the skin incision was averaged for 2.7 cm (2.5-3.0 cm) long. At final follow-up, standing on tip-toe was possible in all cases while the heel-floor height on ruptured side was shorter by 0.7 cm (0-2 cm). By Arner-Lindholm evaluation scale, 9 cases were excellent, and 3 cases were good. Overall AOFAS score was an average of 96.1 (94-100), and all patients were satisfied with the result. Patients returned to work at an average of 1.3 months after the surgery and pre-injury sports activities were all possible from at 6 months after operation. Conclusion: Since we have treated acute Achilles tendon ruptures with minimal incision technique utilizing the Achillon and gained encouraging functional results with all patients returning to previous work with high patient satisfaction, this technique could be recommended as one of the ideal surgical options for the Achilles tendon ruptures.

  • PDF

Study about the relationship between the amount of posterior impaction and the change of occlusal plane angle and incisor inclination in Le Fort I osteotomy (Le Fort I 골절단술에서 posterior impaction의 양과 occlusal plane angle, incisor inclination의 변화 관계에 관한 연구)

  • Kim, Bok-Joo;Kim, Min-Gu;Kim, Jung-Han;Kim, Chul-Hoon
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.36 no.5
    • /
    • pp.375-379
    • /
    • 2010
  • Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

The Production Objectives and Optimal Standard of Density Control Using Stand Density Management Diagram for Pinus densiflora Forests in Korea (임분밀도관리도를 이용한 소나무림의 적정 임분밀도 관리 기준 및 수확목표)

  • Park, Joon-hyung;Jung, Su-Young;Yoo, Byung-oh;Lee, Kwang-Soo;Park, Yong-bae;Kim, Hyung-Ho
    • Journal of Korean Society of Forest Science
    • /
    • v.106 no.4
    • /
    • pp.457-464
    • /
    • 2017
  • This study has utilized the stand density management diagram to devise an efficient management standard for the stand density for Pinus densiflora that secures the health of the stands and predicted the harvest goals. The appropriate stand control level was estimated by modeling the relationship of the relative yield index (Ry) to the ratio of slender trees within the stand through an exponential function; the coefficient of determination ($R^2$) was found to be 0.424 according to the estimation. The ratio of slender trees within the stand showed a tendency of rapid increase at a certain relative yield index; with this relational function, the appropriate Ry value of 0.84 was obtained. By estimating the curve of the Ry value 0.84, which was the appropriate stand density management level, as well as the height of dominant trees in the central region of Korea, the production objective for each site index was set. Assuming that the final age by the site indices ranged from 10 to 16 for the P. densiflora in central region of Korea, the number of production was estimated to be between 426 to 1,311 trees per ha. It was predicted that the production of medium-diameter logs larger than 30 cm in diameter is possible for the target DBH at a site index of more than 16; small-diameter logs larger than 20 cm in diameter for site indices 12 and 14 enabled, and small-diameter logs of less than 20 cm for site index 10.

Enhancement of Ozone and Carbon Monoxide Associated with Upper Cut-off Low during Springtime in East Asia

  • Moon, Yun-Seob;Drummond, James R.
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.26 no.5
    • /
    • pp.475-489
    • /
    • 2010
  • In order to verify the enhancement of ozone and carbon monoxide (CO) during springtime in East Asia, we investigated weather conditions and data from remote sensors, air quality models, and air quality monitors. These include the geopotential height archived from the final (FNL) meteorological field, the potential vorticity and the wind velocity simulated by the Meteorological Mesoscale Model 5 (MM5), the back trajectory estimated by the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model, the total column amount of ozone and the aerosol index retrieved from the Total Ozone Mapping Spectrometer (TOMS), the total column density of CO retrieved from the Measurement of Pollution in the Troposphere (MOPITT), and the concentration of ozone and CO simulated by the Model for Ozone and Related Chemical Tracers (MOZART). In particular, the total column density of CO, which mightoriginate from the combustion of fossil fuels and the burning of biomass in China, increased in East Asia during spring 2000. In addition, the enhancement of total column amounts of ozone and CO appeared to be associated with both the upper cut-off low near 500 hPa and the frontogenesis of a surface cyclone during a weak Asian dust event. At the same time, high concentrations of ozone and CO on the Earth's surface were shown at the Seoul air quality monitoring site, located at the surface frontogenesis in Korea. It was clear that the ozone was invaded by the downward stretched vortex anomalies, which included the ozone-rich airflow, during movement and development of the cut-off low, and then there was the catalytic photochemical reaction of ozone precursors on the Earth's surface during the day. In addition, air pollutants such as CO and aerosol were tracked along both the cyclone vortex and the strong westerly as shown at the back trajectory in Seoul and Busan, respectively. Consequently, the maxima of ozone and CO between the two areas showed up differently because of the time lag between those gases, including their catalytic photochemical reactions together with the invasion from the upper troposphere, as well as the path of their transport from China during the weak Asian dust event.