• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.395-398
• /
• 2006

Forging is applied for many industrial fields. Also, it is applied to hose nipple. Stress and metal analysis is finding method of forging possibility and we predict this possibility by finite element forging analysis. But there are also many manufacturing procedure after forging, and metal texture is varied by additional heat treatment or coating. So this research is focused on the measuring and analysis of plastic residual stress distribution at overall manufacturing procedure. From raw material to final product we measured real residual stress at each manufacturing procedure by X ray diffract meter, and simulated another procedure except forging by nonlinear finite element analysis. Also we showed how Zn-Ni coating is more contributable to metal strength than Zn coating. By this research we make final conclusion that process analysis must be observed from raw material to final manufacturing state for robust design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.924-931
• /
• 2005

In this study, we intended to compare and examine several settlement management methods by analyzing measurement results of a site of the industrial complex at ${\bigcirc}{\bigcirc}$ province. We predicted and analyzed the amount of final settlement by using generally used final settlement methods as like Hyperbola method, Hoshino methods and Asaoka method. And then, We compared the predicted results with that of measurement. On the basis of comparison of the three methods, Hyperbola method was the most convenient and accurate method of the three methods and if a sufficient time was given enough after embankment construction, the use of Hoshino method was possible. In the case of the Asaoka methods, it was possible to know that it had an approaching tendency to the measured one with increasing time interval spent on analysis. Therefore, in order to predict settlement behavior more accurately it is needed to understand their advantages and shortcomings sufficiently and pay attention to application to the real site.

• Journal of Hydrogen and New Energy
• /
• v.26 no.2
• /
• pp.148-155
• /
• 2015

Electrospun $LaCoO_3$ perovskite nanofibers were produced for the air electrode in Zn-air rechargeable batteries using electrospinning technique with sequential calcination. The final calcination temperature was varied from 500 to $800^{\circ}C$ in order to determine its effect on the physical and electrochemical properties of the prepared $LaCoO_3$ perovskite nanofibers. The surface area of the electrospun $LaCoO_3$ perovskite nanofibers were observed to decrease with increasing final calcination temperature. Electrospun $LaCoO_3$ perovskite nanofibers calcined with final calcination temperature of $700^{\circ}C$ had the best electrocatalytic activity among the prepared perovskite nanofibers.

• KSBB Journal
• /
• v.9 no.1
• /
• pp.8-15
• /
• 1994

The research has been carried out to optimize a recombinant S. cerevisine fermentation process for the production of an anticoagulant hirudin. The structural gene coding for hirudin was combined with the GAL10 promoter for controlled expression, the MFal signal sequence for hirudin secretion, and the GAL7 terminator for transcriptional termination. Growth medium composition and environmental conditions were optimized for maximizing cell growth and final hirudin concentration. The optimized conditions included yeast extract 40g/$\ell$, casamino acid 5g/$\ell$, g1ucose 20g/$\ell$, galactose 30g/$\ell$, DO 50% and temperature $30^{\circ}C$. These conditions yielded the specific cell growth rate of $0.13hr^{-1}$, the final cell density of 30g cell/$\ell$ and the final hirudin concentration of 64mg/$\ell$ in the batch fermentation with a 2.5$\ell$ jar fermentor.

• Journal of Environmental Science International
• /
• v.29 no.10
• /
• pp.951-959
• /
• 2020

This study aimed to re-establish the conservation area reflecting landscape ecological value through scenario program, targeting Odaesan National Park. The basic data were mapped in watershed planning units, which were set considering topographical and ecological values. The framework of Marxan with Zones, using an indexation process, was using the mapped indicators. Each best solution according to the scenarios was assessed through sensitivity analysis, and a final solution was selected among the best solutions, considering criteria including area ratio of conservation area and grouping. Lastly, the final solution was verified in the overlap analysis with recent zonation. As a result, through the framework of Marxan with Zones, the best solution of scenario 1, which was set by the highest conservation criteria was selected as the final solution, and the area ratio of conservation area and grouping was excellent. As for the overlap analysis, the suggested conservation area was improved compared to recent zonation in terms of the area ratio (39.4%), biotope grade I (35.6%) and the distribution points (7 places) of legally protected species.

• Speech Sciences
• /
• v.7 no.1
• /
• pp.187-201
• /
• 2000

This study was done to investigate the English vowels in relation to the foreign accent. In this study, I also tried to find out the foreign accent of the English diphthong /o/ and front low vowel /${\ae}$/ when Koreans speak English. The reason why I chose these vowels is that these vowels, /o/ and /${\ae}$/, are difficult for Koreans to discern and pronounce. Koreans show a foreign accent in their pronunciation. In order to find out the reason for a Korean foreign accent, experiments were carried out with the help of acoustic instruments. According to the results of the experiment, Koreans showed a foreign accent in their English pronunciation of vowels in relation to their utterance positions. Americans showed a final lengthening effect but Koreans showed a final shortening effect. This means that Koreans showed a foreign accent in the final stressed syllable of a sentence. In addition to this, the duration of two English vowels, /o/ and /${\ae}$/, showed considerably different features between Koreans and Americans. In fact, in the pronunciation of the diphthong /o/, the tongue moves from one position to another. The two articulations of a diphthong can be described as the nucleus plus a glide. However, most Koreans have no idea of this phenomenon and pronounce the diphthongs like two separate monophthongs. This causes a great difference in the lengths of English diphthong /o/ between Koreans and Americans.

• Journal of Technologic Dentistry
• /
• v.40 no.3
• /
• pp.151-162
• /
• 2018

Purpose: The main purpose of this study is to develop assessment measures for the quality of service for dental labs. Methods: In order to construct the measure of service quality assessment for dental labs, relevant modifications were extracted around theoretical studies, and the survey was conducted on dental technician workers through internet survey. final scale questions were extracted through exploratory factor analysis and confirmed factor analysis of measurement variables, the demographic characteristics of the subjects and the perceptual difference of dental labs were analyzed for the extracted variables. Results: The final five variants of the interactive factor analysis that include the ability to change employee growth, reliability, responsiveness, materiality, interoperability, confirmatory factor analysis excludes variations in employee growth wages, welfare benefits, by changing its name to network capabilities, the quality of service factors for the final dental labs consisted of five variations: network competence, reliability, responsiveness, materiality and interoperability. Conclusion : The service quality of the dental labs showed that the reliability of the product related to the dental materials and the product production responsiveness related to the production order, the Materiality of the materials and equipment of the dental labs, the Interoperability responsiveness related to dental orders, And the importance of network capability to form a mutual network.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.26-32
• /
• 2012

Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study will report the characteristic of wafer according to processing time, machining speed and pressure which have major influence on the abrasion of Si wafer polishing. It is possible to evaluation of wafer abrasion by load cell and infrared temperature sensor. The characteristic of wafer surface according to processing condition is selected to use a result data that measure a pressure, machining speed, and the processing time. This result is appeared by the characteristic of wafer surface in machining condition. Through that, the study cans evaluation a wafer characteristic in variable machining condition. It is important to obtain optimal condition. Thus the optimum condition selection of ultra precision Si wafer polishing using load cell and infrared temperature sensor. To evaluate each machining factor, use a data through each sensor. That evaluation of abrasion according to variety condition is selected to use a result data that measure a pressure, machining speed, and the processing time. And optimum condition is selected by this result.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.165-173
• /
• 1996

The dimensional accuracy of a final product is mainly affected by elastic die deformation during the forging and elastic recovery after the ejection in cold forging process. The investigations on elastic recovery are not so much as those of elastic die deformation. The elastic recovery can be determined by using the elastic-plalstic finite element analysis, but, this method has some limits such as poor conver- gence and long computational time, etc. In this paper, a theoretical analysis for predicting the elastic recovery of a final product in axi-symmetric forging process by using the rigid-plastic finite element method is presented. The rigid-plastic finite element analysis of a cold forward extrusion process involving loading, ejecting process is accomplished by rigid-plastic FE code, DEFORM. The effect of elastic die deformation on the final product dimenmsion is also considered. The calculated elastic recovery is compared is compared with the analysis result of elastic-plastic FE code. ABAQUS.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.3
• /
• pp.57-63
• /
• 2011

The internet is currently becoming popularized and generalized in our daily life. Recently, a lot of hacking tools have appeared on the internet. And damage size and seriousness the measurement is impossible. The password security protects oneself and information is the tool which is essential for from the internet, if this emphasizes no matter how, does not go to extremes. If applies a encryption, a 7 character password is sufficient, so long as attackers don't pick easily guessed values. In this paper, entering password using the virtual keyboard, I propose a new and improved one time password algorithm using information a part of ID and final approval time.