• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권8호
• /
• pp.353-362
• /
• 2006

This paper illustrates the practical design procedure on a position control of an electrical fin actuator for the guided missile using Time Delay Control(TDC) and Enhanced Time Delay Observer(ETDO). Since TDC is robust to the model uncertainties such as the parameter variation and the external disturbance, it has been frequently used in nonlinear control systems. For a position control of an electrical fin actuator in the missile system, TDC requires the velocity sensor as well as the position sensor. To resolve the problems of the cost, the space and the malfunction due to the velocity sensor, ETDO is used as the velocity observer. ETDO is enhanced version of TDO that has the problems of the reconstruction errors and the restriction on selecting its gains. To maximize the control performance, the parameters of ETDO are optimized by using the genetic algorithm. The effectiveness of this approach is proved through a series of simulation studies and experiments, and the designed controller is compared with the typical TDC and TDC using the reduced oder observer.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.25-31
• /
• 2015

핀테크(FinTech: Financial Technology)는 IT 기술을 이용하여 금융 서비스를 효율적으로 만드는 기술로 정의한다. 핀테크 기술은 빅 데이터와 IT플랫폼을 통한 혁신적인 기술이며, 기존의 금융시스템의 보안성 및 문제점을 개선하는데 크게 개선할 것으로 기대되고 있다. 국내의 금융기관에서는 효율성 있고 안전한 서비스를 사용자로부터 제공하기 위해 기술도입과 투자를 하고 있다. 그러나 금융환경에서는 정보유출, 보안사고가 발생하여 고객의 신뢰를 얻지 못하고 있으며, 신규 및 변종의 보안위협 및 공격기법이 발생하고 있다. 그러므로 본 논문에서는 핀테크 환경에서 사용자로부터 안전한 결제 시스템에 관하여 연구하여 인증기법을 설계하도록 한다. 제안된 논문은 금융환경에서 발생한 공격기법에 대해서 안전성을 분석하여 기존의 시스템과 보안성을 평가하였다.

• 지식경영연구
• /
• 제19권2호
• /
• pp.109-132
• /
• 2018

Recently, new financial services related to FinTech has gained attention more and more. Online P2P financial services transactions such as FinTech require careful examination of the constituents of information systems as an investment is made based on the information presented on the online platform without direct face-to-face contact. The purpose of this study is to find out the success factors of online P2P Lending service among FinTech. To serve the purpose, we build IS (information system) success model, and then use Kano model and fuzzy analytic hierarchy process (Fuzzy-AHP) to find out factors for the success of online P2P Lending service. In particular, this study uses Kano model to classify information system satisfaction factors and to calculate the satisfaction coefficient. The Kano model, however, has a drawback of evaluating single criterion. Therefore, we use multi-criteria decision-making technique such as Fuzzy-AHP to derive the relative importance of the factors. The analysis results show different results depending on the analysis technique. In the Kano model, most of the information system factors are a one-dimensional quality attribute. The satisfaction coefficient is highest for personalized service, followed by the responsiveness of service, ease of using a system, understanding of information, usefulness of information' reliability. The service reliability is the highest in dissatisfaction coefficient, followed by system security, service responsiveness, system stability, and personalized service. The results of the Fuzzy-AHP analysis shows that the usefulness of information quality, the personalization of service quality, and the security of system quality are the significant factors and the stability of system quality was a secondary factor.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.746-753
• /
• 2005

Adsorption chillers have been receiving considerable attentions as they are energy-saving and environmentally benign systems. In order to evaluate adsorption rates, experiments were performed in the batch type adsorption apparatus. Three types of silica gels were investigated under an assortment of experimental conditions that are representatives of the actual operating environments in the adsorber of adsorption chillers. Experimental results revealed the effects of silica gel particle size, bed temperature, and fin pitch of fin tube on the adsorption rate. The $0.25\~1.18mm$ particle size of silica gel with high adsorption rate was selected as a suitable adsorbent. The measured adsorption rate became bigger with decreasing particle size. From the comparison of adsorption rate, it is found that the fin tube has about $21\%$ higher value than that of the bare tube. The effect of heat and mass flux is found to be more significant in the fin tube than in the bare tube.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.85-91
• /
• 2013

It is essential to reduce the amount of fossil fuel because facing with the natural problem such as a global warming. To achieve this goal, many of interests in the use of renewable energy is growing. Especially, as one of these renewable energy systems, a solar air heater invention has been conducted for enhancing the efficiency of solar air heater. According to this trend, scale-down sized experiment apparatus was constructed and performed for searching a proper fin and confirming the heat transfer performance by fin shape on constant heat condition to enhance efficiency of solar air heater. In this experiment, heat gain, convection heat transfer coefficient, number of transfer units, Nusselt number, Reynold's number, friction factor, performance factor were investigated in order to evaluate the thermal characteristics based on the real data obtained. By comparison with the each fin performance, a zigzag shape keeping a right angle to the plate had the highest value among them.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.31-36
• /
• 2021

최근에 지구온난화 문제로 인하여 자동차 공조시스템은 GWP 지수가 높은 R134a 냉매를 대체할 수 있는 대체 냉매를 적용하고 있다. 본 연구에서는 R1234yf 냉매를 사용하여 내부열교환기와 가면용량형 팽창밸브인 TXV를 적용한 자동차 공조시스템의 성능특성을 해석하였다. 상용 소프트웨어인 Amesim을 이용하여 주요 부품인 압축기, 응축기, 팽창장치, 증발기와 내부열교환기를 모델링을 하여 외기온도와 응축기 휜 피치 변화에 따른 냉동사이클 시뮬레이션을 수행하였다. 외기온도가 30℃에서 40℃로 증가함에 따라 시스템의 냉방용량은 3.1% 감소하고, 압축기 소비동력은 17.1% 증가하였다. 또한, 응축기의 휜 피치를 0.8 mm에서 1.4 mm로 증가시키면서, 사이클 성능특성을 해석하였다. 휜 피치가 1.0 mm 클 경우에 응축기의 방열량은 감소하였고, COP는 5.9% 까지 감소하였다. 응축기 휜 피치가 1.0 mm 보다 작은 0.8 mm에서는 시스템 성능에 큰 변화가 없어 휜 피치 1.0 mm에서 최적의 성능을 나타내는 것으로 분석되었다.

• 한국추진공학회지
• /
• 제24권5호
• /
• pp.43-55
• /
• 2020

가스터빈 블레이드의 핀-휜 배열의 냉각 성능을 향상시키기 위하여 분절핀을 설치하여 효과를 분석하였다. 분절핀의 위치에 따른 유동 및 열전달 특성 변화를 수치해석을 통해 분석하였다. 분절핀이 설치되지 않은 엇갈림 핀-휜 배열인 기존형상 와 분절핀이 X₂/D_p=1.25 간격 떨어진 분절핀적용형상 1과 X₃/D_p=1.75 간격 떨어진 분절핀적용형상 2 를 비교하였다. 해석 결과 분절핀의 설치로 인해 핀-휜 배열 전단부에서 발생하는 말발굽와류의 세기가 강화되는 것을 확인하였다. 또한 핀-휜 배열 후단부에서 발생하는 멤돌이 와류의 세기가 약해지는 것을 확인하였다. 이로 인해 바닥면의 열전달 분포가 크게 상승하는 것을 확인 하였다. 반면 분절핀의 설치로 인해 압력손실은 증가하였으나, 열성능계수는 분절핀 적용형상 2 에서 최대 23.8% 가량 증가하는 것을 확인하였다. 이를 통해 향후 가스터빈 핀-휜 냉각 유로 설계 시 분절핀을 설치하면 냉각 성능이 증대 될 것으로 판단된다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권3호
• /
• pp.25-46
• /
• 2017

Purpose The purpose of this study is to analyze the factors for continuous use intention of the simple payment service based on FinTech for Chinese residents in Korea. The Technology Acceptance Model(TAM) and the continuous use model of information system were applied to the AliPay service, which is the most used by Chinese people. Design/methodology/approach In this study, internal factors and external factors for the simple payment service were derived through previous studies and the effects of the users' perspectives on the intention of continuous use were analyzed. As a result, convenience, responsiveness, perceived usefulness, and suitability were supported as factors affecting ongoing intention to use simple payment service. Especially, convenience is a factor affecting the duration of the simple payment service and it is an important factor for the continuous use of the service. Findings As the number of foreigners living or working in Korea is increasing, understanding the perception of the simple payment service and analyzing the factors for the continuous use can be meaningful as a basic research for the market advancement and growth of domestic FinTech companies is.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.608-614
• /
• 2015

Nitrogen oxide(NOx) emission reductions are required to meet the strict emission regulations for environmental protection. Most of the Exhaust Gas Recirculation(EGR) system applied to a diesel engine can relatively decrease the NOx at a low cost, but it has a disadvantage in that the PM generation is promoted due to the hot intake air temperature. Thus, high heat exchange efficiency of the EGR cooler is required for an effective removal of NOx. In this study, heat exchange efficiency for various types of heat exchangers used in EGR cooler was measured under same conditions, and determined best heat exchange performance shape depending on type of heat exchanger.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1580-1586
• /
• 2003

This paper presents the design and the analysis of a "fish-like underwater robot". In order to develop swimming robot like a real fish, extensive hydrodynamic analysis were made followed by the study of biology of the fishes especially its maneuverability and propel styles. Swimming mode is achieved by mimicking fish-swimming of carangiform. This is the swimming mode of the fast motion using its tail and peduncle for propulsion. In order to generate configurations of vortices that gives efficient propulsion yawing and surging with a caudal fin has applied and in order to submerge and maintain the body balance pitching and heaving motion with a pair of pectoral fin is used. We have derived the equation of motion of PoTuna by two methods. In first method, we use the equation of motion of underwater vehicle with the potential flow theory for the power of propulsion. In second method, we apply the method of the equation of motion of UVM(Underwater Vehicle-Manipulator). Then, we compare these results.