• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.43-46
• /
• 1998

Many of the active noise control system utilize a form of the least mean square(LMS) algorithm. This paper discusses the dependence of the convergence rate on the acoustic error path in the popular algorithm which is conventional "filtered-x LMS" and introduces new algorithm "constrained filtered-x LMS". The proposed method increase the convergence region regardless of the time-delay in the acoustic error path. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the control process become stationary. Advantages of constrained filtered-x LMS algorithm is illustrated by convergence analysis in the mean sense.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.10-15
• /
• 1998

Application of the Filtered-X LMS adaptive filter to active noise cancellation requires to estimate the transfer characteristics between the output and the error signal of the adaptive canceler. In this paper, we derive an adaptive cancellation algorithm and analyze is convergence behavior when the acoustic noise is assumed to consist of multiple sinusoids. The results of the convergence analysis of the Filtered-X LMS algorithm indicate that the effects of parameter estimation inaccuracy on the convergence behavior of the algorithm are characterize by two distinct components : Phase estimation error and estimated magnitude. In particular, the convergence of the Filtered-X LMS algorithm is show to be strongly affected by the accuracy of the phase response estimate. Simulation results of the algorithm are presented which support the theoretical convergence analysis.

• The Journal of the Acoustical Society of Korea
• /
• 제19권2E호
• /
• pp.3-7
• /
• 2000

Vibration generated by the non-uniform road profile propagates though each tire and the suspension and finally generates structure born noise in the interior of the passenger vehicle. In this paper, the road-booming-noise which has strong correlation with the vibration signals measured at the suspension system was compensated. Active noise control of the road-booming-noise is rather difficult to achieve because of its non-stationary characteristics. CMFX LMS (Constraint Multiple Filtered-X Least Mean Square) algorithm, which can track non-stationary process rather well, is applied. Comprison of the proposed method and the conventional MFX LMS (Multiple Filtered-X Least Mean Square) algorithm is made through the hardware-in-the-loop simulation and the feasibility of the proposed method is demonstrated with the experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.307-308
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.565-567
• /
• 2004

In active noise control (ANC) systems, the convergence behavior of the conventional Filtered-X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortions in the secondary path (e.g., in the power amplifiers, loudspeakers, transducers, etc.), which may lead to degradation of the error-reduction performance of the ANC systems. In this paper, a stable FXLMS algorithm with fast convergence is proposed to compensate for undesirable nonlinear distortions in the secondary-path of ANC systems by employing the Volterra filtering approach. In particular, the proposed approach is based on the utilization of the conventional P-th order inverse approach to nonlinearity compensation in the secondary path of ANC systems. Finally, the simulation results showed that the proposed approach yields a better convergence behavior In the nonlinear ANC systems than the conventional FXLMS.

• 한국음향학회지
• /
• 제37권5호
• /
• pp.331-337
• /
• 2018

본 논문에서는 창문형 능동소음제어(Active Noise Control, ANC)의 잔류 소음의 평가 기준으로 실내소음 평가에서 사용하는 NR(Noise Rating)을 적용하고 이 값의 최소화를 위한 능동소음제어기에 대해서 연구하였다. 이를 위해 Filtered-E LMS(Least Mean Square) 알고리즘을 사용하여 사용자가 설정한 유효 동작 주파수 대역 내에서 NR값을 줄이는 노이즈 쉐이핑(noise shaping) 필터의 형상을 제안하였다. 제안한 필터의 유용성은 시뮬레이션을 통해 검증하였으며, 기존의 심리음향 ANC에서 사용된 필터들과 비교했을 때 잔류 소음의 NR값이 더 낮아지는 것을 보였다.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.179-184
• /
• 2019

본 논문에서는 능동 소음 제어기(Active Noise Controller)의 잔류 소음을 청감적으로 감소시키는 설계법을 제안하였다. 이를 위한 구조로는 FELMS(Filtered-E Least Mean Squares) 알고리즘과 소음 평가 지수인 NC(noise criteria)를 사용하였으며, 능동 소음 제어기의 유효 동작 주파수 대역 내에서 NC 지수를 최소화하는 FELMS에 내장된 노이즈 쉐이핑 필터의 스펙트럼 조건식을 도출하였다. 제안한 조건을 만족하는 필터가 기존에 사용되었던 심리음향 기반의 필터보다 더 향상된 NC값을 나타내는 것을 시뮬레이션을 통해 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.56-62
• /
• 2002

This paper describes a new method of stability evaluation for an estimated impulse response of a plant. It is difficult for the conventional stability evaluation equation to be used in an adaptive feedforward control system which uses an immeasurable acoustic transfer system of a real plant, because the equation requires an exact true impulse response of the plant. Therefore, the usefulness of the conventional equation is limited in a computer simulation. The proposed method is applicable to not only a computer simulation but also a real feedforward adaptive control system. It is found that the system is stable when the value of misadjustment is below -10 dB through computer simulations and experiments. And also, it is proved that the error signal is stable through the verification using filtered reference and filtered error LMS methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.22-25
• /
• 2004

In active noise control (ANC) system, the convergence behavior of the Filtered- X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortion in the secondary path as in the power amplifiers (e.g., saturation), loudspeakers and transducers. This distortion may yields degrading the error reduction performance of the ANC systems. In this paper, the authors of this paper propose a more improved and stable FXLMS algorithm to compensate for the undesirable nonlinearity of the secondary-path, whereby the third-order Volterra model was employed for the identification of the nonlinear secondary-path. In particular, the proposed approach was based on the modification of the conventional FXLMS algorithm. Finally, the simulation results showed that the proposed approach yields better convergence property and more stable performance in the ANC systems.

• 오토저널
• /
• 제14권5호
• /
• pp.95-106
• /
• 1992

Active control of acoustic noise is an application area of adaptive digital signal processing with increasingly interest along the last year. This work studies the implementation of the multichannel LMS filter and the application of this algorithm for the reduction of the noise inside a vechicle cabin using a number of 'secondary sources' drived by adaptive filtering of a reference noise source. Firstly, we propose the use of an adaptive method for the time-varient optimal convergence factor. Secondly, we propose the use of adaptive delayed inverse model to estimate the elastic-acoustic transfer function presented in vechicle cabin. The original, primary source is often periodic, with a known fundamental frequency. A suitably filtered reference signal can thus be used to drive the secondary sources. An algorithm is presented for adapting the coefficients of an FIR filter feeding such a secondary source in such a way as to minimize the output of a suitably placed microphone. In this algorithm, the coefficients of adaptive filter driving an array of secondary sources can be adapted to minimize the sum of the squares of the outputs of a number of error microphones. The multichannel LMS algorithm displays that such an algorithm is considered suitable to used for the global suppression of noise in vehicle cabin.