• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.492-499
• /
• 2009

Effect of drip irrigation on soil salinity control and growth of vegetable crops was studied in the three reclaimed lands of Korea in 2007. Drip irrigation was done one or two times per month for reduction of salt stress by using vinyl hose with tiny holes laid on ridge surface under black plastic film mulch during growing season of cabbage and chinese cabbage. It was observed that drip irrigation was generally effective to soil salinity control, but soil salinity variation of some place was not fully solved to lower down under level of free salt stress. It is also considered that high salinity of runoff water spilled out from cultivation ridge plays another key role for soil salinity management. Consequentially, this soil salinity variation might be one of factors brought low average yield and low commercial ratio of agricultural products. Relation between soil salinity and head growth of cabbage and chinese cabbage was well expressed as logarithmic function. Surface soil EC to reach at 50% of growth reduction to the heaviest head can be estimated was $6.1dS^{\circ}{\S}m^{-1}$ for cabbage and $5.7dS\;m^{-1}$ for chinese cabbage transplanted at optimum season.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.91-96
• /
• 2004

Accumulation of nitrate in edible crops is undesirable due to potential risks to human health. Since nitrate has a role in the osmotic regulation of plants, salt accumulation in soil is expected to stimulate nitrate accumulation in plants. Lettuce (Lactuca sativa L.) was grown in soils of different salinities, 9.69 and $4.49dS\;m^{-1}$, in a greenhouse, and the effect of soil salinity on nitrate accumulation in lettuce was investigated. Content of nitrate in the lettuce increased significantly as soil salinity increased under low light intensity and ample supply of nitrate in root media. Soluble sugar and oxalate contents in lettuce were also significantly higher in the soil of higher salinity. Phosphate, Cl, and $SO_4$ contents in lettuce were not significantly different in soils of different salinities. Among the cations, K content in lettuce was significantly higher in the soil of higher salinity, but Na, Ca, and Mg comtents were not much influenced. Comparing to the lettuce grown in low salinity soil, although the growth of lettuce was decreased by 9% in the soil of higher salinity, nitrate accumulation in the lettuce was increased by 18.6%. These results indicate that higher nitrate content in lettuce of higher salinity soil is a positive accumulation to adapt to the water stress condition. The nitrate accumulation of vegetables grown in plastic film houses is known to be due to the heavy fertilization and low light intensity, but salt accumulation in the soil, which can lower soil water potential, is expected to stimulate the nitrate accumulation further.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.77-84
• /
• 2014

Biodegradable nanocomposites were fabricated with poly (lactic acid) (PLA) and Nanomer$^{(R)}$ I.44P using ultrasonication (US). Processing conditions were optimized to obtain the maximum tensile properties of the nanocomposites. Poly (ethylene glycol) (PEG) was used as a plasticizer to avoid the brittleness of nanocompsoties. In order to disperse nanoclay into the PLA matrix, PEG and Nanomer$^{(R)}$ I.44P were firstly mixed and dispersed in the chloroform and followed by ultrasonication for 1 min With 10% PEG 400, tensile stress and Young's modulus of the nanocomposites decreased from 53.5 MPa and 2225 MPa to 37.0 MPa and 1757 MPa, respectively, while the elongation was increased from 4% to 21%. Tensile stress, Young's modulus, and elongation of nanocomposites were also increased with nanoclay concentration up to 2% (w/w) and were decreased with further increase in the nanoclay concentration. Transmittance of nanocomposites were significantly decreased from 62.5% for pure PLA film to 7.8% for 5% nanoclay containing nanocomposites. Water vapor permeability of the nanocomposites was also significantly decreased with nanoclay concentration and the minimum WVP of $3.5{\times}10^{-11}g{\cdot}m/m^2{\cdot}s{\cdot}Pa$ was obtained with 5% (w/w) nanoclay concentration. The PLA/Nanomer$^{(R)}$ I.44P nanocomposites showed a great potential as a environmental friendly food packaging material.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.657-662
• /
• 2008

To develop transgenic orchardgrass (Dactylis glomerata L.) resistant to high temperature, the recombinant DgHSP17.2 gene was introduced into orchardgrass plants using the Agrobacterium-mediated transformation method and expressed constitutively under the control of the CaMV 35S promoter. The results of genomic DNA PCR and Southern analysis showed a DNA band and hybridization signal on agarose gel and X-ray film in transgenic orchardgrass plants harboring the recombinant DgHSP17.2 gene, but a DNA band and hybridization signal were not observed in the wild type and empty vector control plants. The same result was also obtained in RT-PCR and Southern blot analysis, and these transgenic orchardgrass plants did not show any morphological aberration both in the culture bottle and soil mixture. When leaf discs cut from transgenic orchardgrass plants with recombinant DgHsp17.2 gene were exposed to lethal temperature (heat treatment at $60^{\circ}C$ for 50 min), 60-80% of the leaf discs showed only damage symptoms, but non-transgenic leaf discs showed a lethal condition. These results indicate that the DgHsp17.2 gene may act as a protector from heat stress in plants.

• Journal of Surface Science and Engineering
• /
• v.48 no.2
• /
• pp.33-37
• /
• 2015

High efficiency LED device is being concerned due to its high heat loss, and such heat loss will cause a shorter lifespan and lower efficiency. Since there is a demand for the materials that can release heat quickly into the external air, the organic insulating layer was required to be replaced with high thermal conductive materials such as metal or ceramics. Through anodizing the upper layer of Al, the Breakdown Voltage of 3kV was obtained by using an uniform thickness of $60{\mu}M$ aluminum oxide($Al_2O_3$) and was carried out to determine the optimum process conditions when thermal cracking does not occur. Two Ni layers were formed above the layer of $Al_2O_3$ by sputtering deposition and electroplating process, and saccharin was added for the purpose of minimizing the remain stress in electroplating process. The results presented that the 3-layer film including the Ni layer has an adhesive force of 10N and the thermal conductivity for heat dissipation is achieved by 150W/mK level, and leads to improvement about 7 times or above in thermal conductivity, as opposed to the organic insulation layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2016

RE : YAG ($RE=Nd^{3+}$, $Er^{3+}$) single crystals are laser diodes and generally grown by Czochralski method with controlling the various growth parameter. Since the defects occurred by temperature gradient or the rotation speed of solid-liquid growth interface act as the decline of crystal optical property during the growth procedure, crystalline quality improvement via defects analysis is necessary. The etch pit density (EPD) analysis was used to confirm the surface defect of grown RE : YAG single crystal and to select the area of transmission electron microscopy (TEM) analysis. Defects in the specimen produced by tripod polishing method such as buckling, rod shaped, bend contours by internal stress, segregation and others were observed by using 200 kV TEM and 300 kV FE-TEM.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.82-88
• /
• 2012

The usage of recycling agent is the most effective way of enhancing the performance of recycled asphalt pavement. Generally, many countries accepted these recycling agents retarding the various types of cracks resulted in binder aging. Contrary to such general tendency, recycling agents are used as very small amount in domestic recycling plant. The main reason of this is relatively high price of recycling agent. Even though agent price is high, agent can be a effective and economical way of alternative in asphalt recycling. In this study, penetration and softning point test performed by using RTFO(Rolling Thin Film Oven) aged binder. And, PG(Performance Grade) at high temperature, fatigue and MSCR(Multi Stress Creep and Recovery) tests exercised. The oil type agent is worked well to retrieving target penetration number. In PG test, $G^*/sin{\delta}$ of agents identically showed high value and polymer type agent is good at recovery value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.267.1-267.1
• /
• 2016

본 연구에서는 nematic 액정의 종류 중 하나인 5CB (4-Cyano-4'-pentylbiphenyl) 물질을 박막 트랜지스터 (TFT)의 passivation 층으로 사용했을 때 그 전기적 특성향상을 확인하였다. RF-magnetron sputtering법으로 증착된 비정질 InGaZnO 박막을 활성층으로 사용한 TFT를 제작하여 그 활성층 위에 drop형식으로 passivation 하였다. 그 결과, drain current (I_DS)가 약 10배 정도 증가하고, linear region(V_D=0.5V)에서 mobility와 subthreshold slope(SS)이 각각 6.7에서 12.2, 0.3에서 0.2로 향상되는 것이 보였다. 이것은 gate bias가 인가되었을 때 freedericksz 전이를 통한 액정의 배향과 이때 형성된 dipole 형성에 의한 것으로 보이며, 이러한 LC의 배향은 편광현미경을 통하여 표면과 수직으로 배향한다는 사실을 확인 할 수 있었고 이 LC-passivation된 a-IGZO TFT의 전기적 특성의 향상에 대한 mechanism을 제시하였다. 그리고 배향한 LC가 가지는 dipole에 의해 bias stress 상황에서 독특한 electron trapping과 recovery의 증폭효과가 나타났다. V_G=+20V의 positive gate bias stress를 1000s동안 가했을 때, passivation되지 않은 a-IGZO TFT의 경우 +4V의 threshold voltage shift(${\Delta}V$_TH)가 발생되었고, 바로 -20V의 negative gate bias를 30s간 가해주었을 때 -2.5V의 ${\Delta}V$_TH가 발생하였다. 반면 LC-passivation된 a-IGZO TFT의 경우 각각 +5V와 -4V의 ${\Delta}V$_TH로 더 큰 변화를 가져왔다. 이러한 LC에 의한 electron trapping/recovery 증폭효과에 대한 model을 제시하였다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.392-398
• /
• 2006

The properties of tunable dielectric materials on RF frequency band are important high tunability and low loss for RF variable devices, variable capacitor, phased array antenna and other components application. Various composite of BST(barium strontium titanate) ratio combined with other non-electrical active oxide ceramics have been formulated for such uses. We present the tunable properties and Curie temperature on BST thick films. The grain growth of the weight ratio of $BaTiO_3$ increased. This can be explained by the substitute $Sr^{2+}$ ion for $Ba^{2+}$ ion in the $BaTiO_3$ system. The Curie temperature was shifted to lower temperature with increasing $SrTiO_3$in the $BaTiO_3-SrTiO_3$ system, because of decreasing the lattice constant. Also, the dielectric constant, tunability and K-factor of $(Ba_xSr_{1-x})TiO_3$ at over the Curie temperature decreased, at over the $60^{\circ}C$ fixation, maximum dielectric constant at Curie temperature and hence sharper phase transformation occurred at Curie temperature. The result were interpreted as a process of internal stress relaxation resulting form the increase of $90^{\circ}$ domains induced the BST. As a result, It is concluded that over the Curie temperature, frequency response and DC field effect for the tunable properties of BST thick film are suppressed by the transition broadening. For the application of tunable devices, that the curie temperature was investigated to be increased.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2007

There are many modern's overwork. excessive drinking, carriage that give stress in muscle by smoking. Because time that sit long by carriage is much. if myalgia beats widower on muscle rheumatism or union formation inflammation, core ache, there is congealment and is painful. Muscle itself is no military register change and rheumatism change shows in areolation of muscle film or muscle nerve sheath etc. that union tissue's inflammation case is around the muscle. It is typical rain joint sex rheumatism. Can assume in case of made work that do not get used to extreme exercise or body perforce. Special quality of do waveform and supersonic waves stimulation processing plant which frequency that is established in research that do Iroin is continued without change is available embodiment according to patient's state variously by series mode through mode frequency waveform, 10 modes, 25 modes, 50 modes etc. Sample that can decide basis standard for supersonic waves through an experiment, low frequency treatment equipment standard for low frequency equipment. supersonic waves treatment equipment that float in city adjusting establishment naturally establish.