• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.447-452
• /
• 2016

In this study, we fabricated and evaluated the performance of film speaker using PVDF/ZnO NP composite structure. PVDF piezoelectric films were fabricated and characterized by XRD and SEM. ZnO nanopillars were prepared by hydrothermal synthesis on prepared PVDF piezoelectric films. We analyzed and tested the acoustic signal characteristics of the piezoelectric film. In order to fabricate an acoustic structure with a wide frequency range from low to high frequency, we have fabricated various types of film speakers and investigated the frequency characteristics. As a result, the fundamental piezoelectric properties of PVDF show that the piezoelectric constant due to ZnO NP increases. And the overall acoustic signal level is also increased by 10% or more. We investigated frequency generation from 500 Hz to 10 KHz using different sizes with PVDF/ZnO NP composite film speaker.

• International Journal of Internet, Broadcasting and Communication
• /
• v.4 no.1
• /
• pp.1-2
• /
• 2012

A speaker is a system which produces sound through electromechanical operations. It transforms electronic signals into audible sound signals. Almost all speakers are three dimensional. These days, many mobile electronic devices such as mobile electronic devices have become smaller and thinner. A problem with this miniaturization, however, is that the volume of speakers has also decreased. In contrast to conventional three dimensional speakers, we have invented a new type of two dimensional flexible speaker by utilizing the reverse piezoelectric effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• Journal of Sensor Science and Technology
• /
• v.28 no.6
• /
• pp.360-365
• /
• 2019

A polyvinylidene fluoride (PVDF)-based film speaker is successfully fabricated with enhanced bass sound by incorporating buckled nanospring carbon nanotubes (NS-CNTs) as fillers. Various concentrations up to 1-7 wt% of uniformly dispersed buckled NS-CNTs are loaded to increase the beta (β)-phase fraction, crystallinity, and dielectric constant of the speaker, and this results in the bass part enhancement of about 19 dB full scale (dBFS) at 7 wt% filler loading of the piezoelectric film speaker.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.70-70
• /
• 2003

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.40-41
• /
• 2006

In this work, we developed the 0-3 type piezoelectric composite to incorporate the advantages of both ceramic and polymer. The PVDF-PZT composites were fabricated with various mixing ratio by 3-roll mi11 mixer. The composite solutions were coated on ITO bottom-electrode deposited on PET (polyethylene terephthalate) polymer film by the conventional screen-printing method. After depositing the top-electrode of silver-paste, 4kV/mm of DC field was applied at $120^{\circ}C$ for 30min to poling the 0-3 composite film. The value of $d_{33}$ was increased as the PZT weight percent was increases. But the $g_{33}$ value showed the maximum at 65 wt% of PZT powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.877-878
• /
• 2009

To realize the flexible audible display (FAD), polymer dispersed liquid crystal(PDLC) is deposited on PVDF(Poly-vinylidene fluoride) film with piezoelectric property. With applied audio signal, it makes sound more than 70 dB in 700 Hz-10kHz. In case of transparency it is opaque and transmittance is less than 10% at 550nm wavelength without bias voltage. It is turned to be transparent and show transmittance of 66% with driving voltage of 60V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.474-475
• /
• 2009

As a substitute of ITO material, carbon nanotube (CNT) is widely studied for transparent conductive film (TCF). Current sheet resistance of CNT-TCF is about 100 ${\Omega}$/sq at 80% transmittance. But CNT-TCF performance in manufacturable level is about 500 ${\Omega}$/sq at 83% based on the Topnanosys Co's result. Therefore, critical issue in CNT-TCF research is to reduce the sheet resistance with manufacturing reliability. In this report, recent developments using CNT-TCF are introduced. Touch panel, transparent LED signboard, transparent speaker and transparent heater are representative examples. Also I describe the future issues and prospect of CNT-TCF for the flexible display.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.644-650
• /
• 2007

Mechanical property evaluation of micrometer-sized structures is necessary to help design reliable microelectromechanical systems(MEMS) devices. Most material properties are known to exhibit dependence on specimen size and such properties of microscale structures are not well characterized. This paper describes techniques developed for tensile testing of thin film used in MEMS. Epi-polycrystalline silicon is currently the most widely used material, and its tensile strength has been measured as 1.52GPa. We have developed a tensile testing machine for testing microscale specimen using electro-magnetic actuator. The field magnet and the moving coil taken from an audio-speaker were utilized as the components of the actuator. Structure of specimen was designed and manufactured for easy handling and alignment. In addition to the static tensile tests, it is described that new techniques and procedures can be adopted for high cycle fatigue test of a thin film.