• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.711-718
• /
• 2014

Investigated the processing characteristics of the pollutants and runoff due to storm events in the actual application of the road fields and a Non-Point Sources (NPS) pilot scale equipment. This phenomenon has occurred in the influent bypass the blockage occurs after 90 min the expended polymeric media was filled with filtered column. When entering a treatment tank SS 200 mg/L or more high concentration of effluent treatment efficiency was reduced from the reaction time 60 min. Influent concentration less then SS 180 mg/L was stable handling. The $COD_{Cr}/SS$ ratio were analyzed with 0.67, median value. Showed 92.1% and 82.3% respectively with an average removal rate of the SS and the $COD_{Cr}$. If the influent concentration of TP is the 0.5 mg/L or less, the quality of the treated water is 0.1 mg/L levels were expressed in a stable process. And when entering the 1.0 mg/L or more of the treated water, had a greater than average 0.2 mg/L. If the influent concentration of TN is 4~10 mg/L, the treatment water quality level was kept a 1.5~3.0 mg/L. The average removal efficiency of TP and TN respectively 73.9%, 50.4%.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2009

Temperature and injection current dependence of electroluminescence(EL) spectral intensity of the $In_xGa_{1-x}N$/GaN multi-quantum wells(MQW) have been studied over a wide temperature range and as a function of injection current level. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents shows a drastic difference. This unique EL efficiency variation pattern with temperature and current can be explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields. Increase of the indium content in $In_xGa_{1-x}N$/GaN multiple quantum wells gives rise to a redshift of 80 meV and 22 meV for green and blue MQW, respectively. It can be explained by carrier localization by potential fluctuation of multiple quantum well and MQW structures also shows a keen difference owing to the different indium content in InGaN/GaN MQW.

• The Journal of the Korean dental association
• /
• v.53 no.4
• /
• pp.266-274
• /
• 2015

The price for health service are decided by very complicated process because many of factors are related with them. The RBRVS(resource-based relative value scale) were used to calculate the Korean health service fees including dental fees. This study aimed to compare dental fees of Korea with other countries, such as Japan, Germany, and the US for evaluating the adequacy. Dental fees were categorized as oral evaluation and imaging, dental treatment including restorative, periodontal, and surgical work, and preventive treatment and compared by each country. The official documents about dental fees were collected from Korea, Japan, Germany, and the US. Each fee was presented as their own currency at first. Then they were converted into Korean won (KRW) by applying the market exchange rates at a specific point of time. Finally the fees were adjusted by purchasing power parities (PPPs) which equalize the different currencies. In general, the level of Korean fees were markedly low compared to those of Japan, Germany, and the US. German fees were similar or higher than that of Japan, and the US. The Korean fees were lower than three other countries 1.2~4.1 times for oral evaluation and 2.2~7.3 times lower for panoramic radiography. The endodontic fees of Japan, Germany, and the US were higher 1.8~15.3 times and 4.0~35.9 times for the deciduous teeth extraction compared to the Korean. In Japan the prophylaxis was 3.2 times more priced than the Korean fee. Exceptionally, the fees for re-evaluation, amalgam filling, and scaling were lower priced in Japan than other countries. This study has limitations on the items in definition and contents of dental practices units which were not exactly comparable and differently determined by countries. However, this study is meaningful because it surveyed the price levels to compare four different countries and then applied PPPs adjustment. This finding can be used to develop the dental RBRVs of Korean national health insurance and will contribute to improving the payment systems of health care.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.12-27
• /
• 2004

Thanks to spectacular advances in the techniques for identifying proteins separated by two-dimensional electrophoresis and in methods for large-scale analysis of proteome variations, proteomics is becoming an essential methodology in various fields of plant sciences. Plant proteomics would be most useful when combined with other functional genomics tools and approaches. A combination of microarray and proteomics analysis will indicate whether gene regulation is controlled at the level of transcription or translation and protein accumulation. In this review, we described the catalogues of the rice proteome which were constructed in our program, and functional characterization of some of these proteins was discussed. Mass-spectrometry is a most prevalent technique to identify rapidly a large of proteins in proteome analysis. However, the conventional Western blotting/sequencing technique us still used in many laboratories. As a first step to efficiently construct protein data-file in proteome analysis of major cereals, we have analyzed the N-terminal sequences of 100 rice embryo proteins and 70 wheat spike proteins separated by two-dimensional electrophoresis. Edman degradation revealed the N-terminal peptide sequences of only 31 rice proteins and 47 wheat proteins, suggesting that the rest of separated protein spots are N-terminally blocked. To efficiently determine the internal sequence of blocked proteins, we have developed a modified Cleveland peptide mapping method. Using this above method, the internal sequences of all blocked rice proteins (i. e., 69 proteins) were determined. Among these 100 rice proteins, thirty were proteins for which homologous sequence in the rice genome database could be identified. However, the rest of the proteins lacked homologous proteins. This appears to be consistent with the fact that about 30% of total rice cDNA have been deposited in the database. Also, the major proteins involved in the growth and development of rice can be identified using the proteome approach. Some of these proteins, including a calcium-binding protein that fumed out to be calreticulin, gibberellin-binding protein, which is ribulose-1,5-bisphosphate carboxylase/oxygenase activate in rice, and leginsulin-binding protein in soybean have functions in the signal transduction pathway. Proteomics is well suited not only to determine interaction between pairs of proteins, but also to identify multisubunit complexes. Currently, a protein-protein interaction database for plant proteins (http://genome .c .kanazawa-u.ac.jp/Y2H)could be a very useful tool for the plant research community. Recently, we are separated proteins from grain filling and seed maturation in rice to perform ESI-Q-TOF/MS and MALDI-TOF/MS. This experiment shows a possibility to easily and rapidly identify a number of 2-DE separated proteins of rice by ESI-Q-TOF/MS and MALDI-TOF/MS. Therefore, the Information thus obtained from the plant proteome would be helpful in predicting the function of the unknown proteins and would be useful in the plant molecular breeding. Also, information from our study could provide a venue to plant breeder and molecular biologist to design their research strategies precisely.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.305-311
• /
• 2013

This study analyzed the oral status after recording the images by using QLF-D with targets of 38 youth people with hearing impairment and hearing language impairment. In order to investigate the state of oral hygiene, plaque index (O'Leary index) and contents of investigation of the state of the teeth included the number of sound teeth, the number of caries teeth, dental caries experience and the number of filling teeth. The following results were obtained. First, women lacked the management on plaque and had more caries teeth compared with men. In terms of impairment classification, subjects with both hearing and language impairment lacked the management on plaque and had more caries teeth. Second, subjects who did not get an oral exam for one year had more caries teeth. Oral hygiene score was the highest with the brushing time for 3-4 minutes. The number of sound teeth was increased as the brushing time was increased. In addition, the oral hygiene management time was the highest when cleaning the teeth, gums and tongue at the same time. Third, it was shown that the satisfaction of oral health education by using the new equipment was high. As a result of this study, in order to improve the oral health level of impaired students, they shall be trained to manage their teeth by themselves and educated to increase their motivation and practice. Thus, it is thought that various approaches which are differentiated from existing methods are required to be tried.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.121-129
• /
• 2017

There have been a number of water and sewer pipe breakdown reports followed by ground subsidence. Also, the excavating works for construction due to overcrowding of city have been common. Particularly, in urban areas ground becomes unstable because of the lowered lifeline sinkage followed excavation and backfilling. In order to solve the problem, some reinforcement works for ground by rod tamping or grouting have been applied. However, it is hard to predict when the buried utilities in underground will be damaged. Also, there is a limit for the underground exploration and investigation methods. Therefore, in this study, the estimated about the water soluble polymer pouch including poor mixed admixture which is designed to eliminate the dangerous factors. The reinforcement strength of this method was confirmed by verifying three points: meltiness in a certain period, water solubility in the ground water level, and characteristics of the pouch, which can be stored in daily conditions. It is also proved that this method allows to keep the ground from getting weakened in the installation of water and sewer pipe along with back filling materials.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup2
• /
• pp.300-308
• /
• 2001

Objectives : Anterior cervical discectomy and interbody fusion has become a well-accepted surgical treatment of degenerative cervical diseases. Implatable cages have a stabilizing effect without plates and no need for autogenous bone graft. The authors evaluates the effect of implatable titanium cage(RABEA) on the clinical and radiological outcomes. Methods : 34 patients with symptomatic cervical degenerative diseases due to one level disc pathology were underwent anterior cervical discectomy and interbody fusion with titanium cages(RABEA) which were not filled with cancallous bone grafts from January 1999 to May 2001. Patients with osteoporosis and older than 65 years were not included. Among them, 15 patients could be followed-up for at least 1 year. The authors retrospectively reviewed the charts and radiographic data. Mean follow-up period was $1.3{\pm}0.2years$. Results : Clinical results according to the Odom's criteria was exellent and good in 14(93%) patients. One patient with fair result showed complete loss of the disc space height due to settlement of the cage. Preoperatively, the mean height of the disc space(${\pm}$standard deviation) was $3.42{\pm}1.10mm$(range 2.0-5.5mm), and at 1 day postoperatively it was $7.88{\pm}0.90mm$(range 6.50-9.0). The mean height of the disc space after 1 year was $6.50{\pm}1.38mm$(range 3.0-8.0). The restoration of the height was statistically significant(p<0.05). The mean height after 1 year was $82.7{\pm}15.9%$ of the height at 1 day postoperatively. Preoperatively the mean value of the cervical lodortic angle was $21.8{\pm}11.8^{\circ}$ and 1 year postopertively, it was $24.5{\pm}8.3^{\circ}$, which was statistically not significant. All patients showed no abnormal movements on flexion and extension lateral film after 6 months. Conclusion : Implantable titanium cages appear safe and effective in selected patients, and their use helps to avoid complications associated with bone graft harvest. Subsidence of the cage seems to be a potential risk factor for recurrence of the symptoms. For long-term results, a longer follow-up is required.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.81-90
• /
• 2021

In this study, the effect of user characteristics and technical characteristics of a blockchain-based financial platform on the intention to use of financial consumers was analyzed. Also, in this influence relationship, we analyzed what kind of causal relationship between relative advantage and perceived risk on intention to use. From June 1 to July 30, 2021, a non-face-to-face self-filling online survey was conducted with a sample of subjects who had experience using a financial platform grafted with blockchain technology, and the study was conducted in 187 copies. For statistical processing, frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis and 3-step mediated regression analysis were performed using SPSS 21.0 program. The significance level of the statistical value was set to less than 95%. The research results are as follows. First, it was found that innovativeness and usefulness affect the intention to use in the user characteristics. Second, in the technical characteristics, compatibility and reliability were found to affect the intention to use. Third, it was found that relative advantage and perceived risk play a partial mediating role in the relationship between user characteristics and intention to use. Fourth, it was found that relative advantage and perceived risk play a partial mediating role in the relationship between technical characteristics and intention to use. Fifth, it was found that there were differences in the ubiquity of user characteristics, compatibility of technical characteristics and intention to use according to the experience of using the certificate. The results of this study can contribute to the development of a financial platform based on the Internet of Things.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.8
• /
• pp.17-30
• /
• 2019

Based on pile load test results for various pile types that were constructed in-situ and pile design data of prebored PHC piles, the ratio of skin friction to total capacity (SRF) was analyzed. A SRF distribution range from the pile load test results for pilot test prebored PHC piles was 42~99% regardless of relative penetration lengths, soil types, and pile load test types. However, a SRF distribution range from the pile design data for prebored PHC piles was 20~53% regardless of relative penetration lengths and pile diameters. Also, a SRF distribution range from the restrike dynamic pile load test results for pretest working prebored PHC piles was a scattered range of 4~83% regardless of pile diameters, relative penetration lengths and soil types. The scattered SRF of pretest working piles was caused to the quality control issue on the filling of cement milk around piles and this quality control issue should be improved. The average SRF calculated by the current design method was estimated to be 2.2 times lower than the average SRF of the pilot test piles. It is because skin friction resistance is calculated at a very low level. Therefore, a new design method for skin friction will be proposed based on this study.