• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.451-457
• /
• 1983

This study was conducted to estimate the effect of the drought on the changes of chlorophyll, protein and proline content of upper three leaves, and the grain yield components of barley plant (CV. baegdong) subjected to water stress at four stages: late vegetative, boot, anthesis early grain filling. 1. In comparison with leaf posititions in water stress, the first leaf below flag leaf maintained the highest relative turgidity, chlorophyll and protein content and showed the least proline accumulation. And, in terms of growth stages in water stress, chlorophyll was shown to be highest at anthesis stage, protein being highest at boot stage and proline being least at boot stage. 2. In boot stages, culm and spike length, and Number of grains per spike were remarkably decreased. And the weight of 1000 grains was at least level in the early grain filling stage, and also the grain size was comparatively decreased at boot and two following stages. 3. The protein content of grain by water stress, apart from early grain filling stage, was not significantly affected by water stress at different growth stages. 4. The rate of sterility was particularly increased at boot and anthesis stages. 5. It was eventually concluded that the boot stage among four growth stages, and the flag leaf in 3 leaf positions were mostly damaged by water stress at reproductive growth stage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.177-184
• /
• 2010

This study was performed to determine the effects of filling materials on the physical properties of permeable polymer concrete. The filling materials were ground calcium carbonate, ground granulated blast furnace slag and fly ash. In this experiment, permeable polymer concrete mixtures with unsaturated polyester resin contents from 5 to 7 weight %, filler/resin ratio of 0~2.0 and crushed coarse aggregate passing 15 mm sieve were prepared and coefficient of permeability, void ratio, compressive strength and flexural strength were tested. As the test results, increase in the strength and decrease in the coefficient of permeability of the permeable polymer concrete were generally observed with increasing the resin contents and filler/resin ratio. The compressive and flexural strength of the permeable polymer concrete were in the range of 8.0 to 35.0 MPa and 2.0 to 9.0 MPa respectively and the highest strength was shown at the mixtures with 7 weight % unsaturated polyester resin contents, 2.0 ratio of filler/resin and filler of ground calcium carbonate. On the other hand, in the level of 20 MPa compressive strength, the mixtures with filler of fly ash was shown as the most economic permeable polymer concrete.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.513-520
• /
• 1999

20 million tons of coal ash has been produced in Korea annually. This causes the environmental problems and the cost of land for ash pond. However the amount of coal ash for recycling is small because of the low level of recycling technology and the ignorance. As the coal ash has the significant engineering properties, it can be utilized as soft ground stabilizer, backfill materials and so forth. The purpose of this paper is to summarize some of the recycling methods of coal ash. One is structural backfill materials, the other is flowable fill. Optimal mixture ratio(fly ash : bottom ash) is determined for structural backfill materials and the model test is performed. The model test accompanied with physical tests were executed for identifying that the flowable fly ash can be used as fill materials such as trench back filling.

• English Language & Literature Teaching
• /
• v.16 no.1
• /
• pp.61-80
• /
• 2009

This study investigates the effects of different types of genre and tasks on college students' English listening comprehension. 104 college students were assigned to Argumentative (AG), Causal and Evaluation (CE), and Narrative (NA) group. They report their listening comprehension through gap-filling (GF), summary (ST), and multiple-choice comprehension task (MC). Results showed that different genre groups were significantly different on overall tasks. Moreover, results from each group also presented that different mean scores on each task indicated a statistical significance. Proficiency levels, higher and lower level group, showed a significant effect for the task on listening comprehension. The results of the statistical analysis, using One-way ANOVA indicated that genre significantly affects Korean college students' listening comprehension, and implied that listening comprehension sores for each genre were also substantially different. Different genre groups resented significant different in overall listening comprehension tasks.

• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.611-621
• /
• 2017

This paper presents an investigation on the fire resistance of high strength fiber reinforced concrete filled box columns (CFBCs) under combined temperature and loading. Two groups of full-size specimens were fabricated. The control group was a steel box filled with high-strength concrete (HSC), while the experimental group consisted of a steel box filled with high strength fiber concrete (HFC) and two steel boxes filled with fiber reinforced concrete. Prior to fire test, a constant compressive load (i.e., load level for fire design) was applied to the column specimens. Thermal load was then applied on the column specimens in form of ISO 834 standard fire curve in a large-scale laboratory furnace until the set experiment termination condition was reached. The test results show that filling fiber concrete can improve the fire resistance of CFBC. Moreover, the configuration of longitudinal reinforcements and transverse stirrups can significantly improve the fire resistance of CFBCs.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.8 no.1
• /
• pp.18-27
• /
• 1999

A tooth solely can not be an exclusive factor to attain our goal, esthetics. Other consideration, such a proportion of individual tooth, harmonized arrangement of the dentition and surrounding tissues including gingiva, lip and face should be taken into account. Esthetic gingival pattern and incisal level in the anterior area are the very important factors for esthetic restoration of the smile. We often propose adequate periodontal and prosthodontic approaches in order to improve the esthetics of the anterior area. Here, I would like to share some cases which include soft tissue management for ovate pontic placement, osteoplasty, resin filling for severe cervical caries, and bleaching approach to discolored root caused by endodontic treatment, and so on.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.3
• /
• pp.1-11
• /
• 2020

Despite the importance of Creating Shared Value(CSV), few research has been conducted to understand it. Filling in this existing void, this study was an attempt to provide a clear understanding about what triggers airline customers' decisions according to the airline company's CSV activities. Through this study, we investigated the relationship among CSV, trust, image, and loyalty. An online survey was used as a method to collect data. Through the CFA, we confirmed the adequate level of reliability and validity of the measures. The structural model was found to include an acceptable fit to the collected data. The findings from the structural analysis revealed that CSV exerted and immense on trust and image. Also, trust was significantly associated with image and loyalty while the image was highly associated with loyalty. Based on the findings presented above, implications for practitioners and researchers are stated.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.135-140
• /
• 2004

To evaluate utilization of tobacco dust as a raw material of reconstituted tobacco, tobacco dust was applied to the paper-making reconstituted tobacco process and we examined the chemical and physical properties of the reconstituted tobacco and raw materials. The use of tobacco dust in the manufacture of reconstituted tobacco had no measurable adverse effects on the chemical properties of the reconstituted tobacco when added to the reconstituted tobacco formula at levels of $3\%,\;5\%,\;7\%\;and\;10\%$ instead of foreign bright stem. Filling power and fragibility index of the reconstituted tobacco was slightly decreased with increasing tobacco dust levels, but it was not significant change. However, when the level of $10\%$ tobacco dust was added to the reconstituted tobacco formula, the tensile index based basis weight was rapidly decreased.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.195-201
• /
• 2012

A vacuum ladling die casting system is suggested as a means to obtain a high vacuum level. A high vacuum of 17.8 mmHg is obtained by sealing the inner space of the mould. The sample product is a rear-head housing for an auto-compressor, and the die-casting with 6-cavities was conducted. The flow analysis shows that the filling speed during vacuum ladling is faster than for a non-vacuum system. The air holes in the sample product were too small to be seen with the naked eye in X-ray films. Density tests show that the high vacuum ladling system reduces the internal porosity as much as 57.8% when compared to the non-vacuum system. A defective rate of only 0.17% was found from leak testing. The results of this research prove that the high vacuum die-casting process is useful for manufacturing of aluminium components under high internal pressure.

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.195-220
• /
• 1995

A lot of sludges occur during an activated sludge treatment process of the washing wastewater and by-product waste in the cuttlefish processing manufacture. The sludges give also out a bad smell, and their amicable reclamation is very difficult because of the limited area of the filling-up. To reduce the heavy weight and large volume of the sludges, they was burning up. After the burning up at 350t for 2hrs the weight(volume) of the sludges were reduced to 5% level of the initial value. In contents of the bad heavy metals for human after the burning up, cadmium and lead metal were slightly detected, while mercury and the bad others not detected.