• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1097-1103
• /
• 2010

사출성형에서 사출압력은 제품의 특성을 결정하는 주요인자이므로 성형품의 품질 향상을 위해 사출압력은 최소화 되어야 한다. 또한 휨 변형과 웰드라인은 사출성형에서의 대표적인 불량요인으로 사출성형품의 품질 향상을 위해 방지되어야 한다. 본 논문에서는 사출성형품의 품질 향상을 위해 설계 절차를 2 단계로 나눈다. 첫 번째 설계에서는 공정조건을 제어하여 사출압력과 휨 변형을 최소화 하기 위해 직교배열표를 이용한 전산실험을 수행하고 이를 이용하여 근사모델을 생성한 후 최적설계를 수행한다. 두 번째 설계에서는 유동경로 개선을 통한 웰드라인의 발생을 방지하기 위해 해석모델의 두께를 변경하고 웰드라인 발생 유무를 평가한다. 이러한 설계절차를 통해 사출압력과 휨 변형을 최소화하면서 웰드라인을 방지하여 본 논문에서 제안한 설계방법의 유효성을 보이고자 한다.

• Composites Research
• /
• 제30권3호
• /
• pp.202-208
• /
• 2017

RTM은 작은 크기에서 큰 크기의 복합재료를 생산할 수 있는 대량 생산 공정이다. 최근 경화 시간이 약 10분 이내인 속경화 수지가 자동차 및 항공우주 산업에 사용되고 있다. 수지의 점도는 경화 정도와 관련이 있으며, 금형 내부로 충진되는 과정에서 급격히 점도가 변할 수 있다. 따라서 속경화 수지의 유동 특성과 경화도를 해석적으로 예측하는 데 많은 노력이 필요하므로 실험적으로 측정하고 평가하는 것이 유리하다. 복합재료의 경화도를 측정하는 방법은 대표적으로 DMA, 유전기법 등이 있다. 본 논문에서는 다채널 경화 모니터링 시스템을 이용하여 속경화 수지의 유동과 경화도를 측정하였다. 총 8채널의 유전센서가 사용되었으며, 다양한 압력 조건에 따른 금형 내부의 유동과 경화도를 측정하고 상호 비교하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.168-168
• /
• 2017

Drought conditions during cultivation reduce agricultural production yield less than a theoretical maximum yield under normal condition. Plant specific NAC transcription factors in rice are known to play an essential roles in stress resistance transcriptional regulation. In this study, we report the rice (Oryza sativa L japonica) NAM, AFTF and CUC transcription factor OsNAC17, which is predominantly induced by abiotic stress in leaf, was contribute to the drought tolerance mediated reactive oxygen species (ROS) in transgenic rice plants. Constitutive (PGD1) promoter was introduced to overexpress OsNAC17 and produced the transgenic PDG1:OsNAC17. Overexpression of OsNAC17 throughout the whole plant improved drought resistance phenotype at the vegetative stage. Morphological characteristics such as grain yield, grain filling rate, and total grain weight improved by 22~64% over wild type plants under drought conditions during the reproductive stage. The improved drought tolerance in transgenic rice was involved in reducing stomatal density up to 15% than in wild type plants and in increasing reactive oxygen species-scavenging enzyme. DEG profiling experiment identified 119 up-regulated genes by more than twofold (P<0.01). These genes included UDP-glycosyltransferase family protein, similar to 2-alkenal reductase (NADPH-dependent oxireductase), similar to retinol dehydrogenase 12, Lipoxygenase, and NB-ARC domain containing protein related in cell death. Furthermore, OsNAC17 was act as a transcriptional activator, which has an activation domain in C-terminal region. These result demonstrate that the overexpression of OsNAC17 improve drought tolerance by regulating ROS scavenging enzymes and by reducing stomatal density

• Tuberculosis and Respiratory Diseases
• /
• 제66권3호
• /
• pp.211-215
• /
• 2009

폐색전증은 일반적으로 고령의 환자, 거동이 불가능한 경우, 만성 내과 질환, 외상이나 술 후 또는 혈액응고질환 등의 위험인자를 갖고 있는 환자에서 호발하는 질환으로 알려져 있다. 그러나, 최근 컴퓨터가 보편화되고 특히 젊은 연령층에서 컴퓨터 게임이 대중화 됨에 따라 이 또한 폐색전증의 위험인자가 될 수 있음을 이 증례를 통하여 보고하고자 한다. 36세 남자 환자가 가슴답답함과 호흡곤란증세로 급성심근경색 의증 하에 응급실로 전원되었다. 환자는 청색증과 저산소증을 보였으며, 흉부컴퓨터단층촬영상 양측 주 폐동맥에 혈전증이 관찰되었으며, 혈전용해술을 시행하여 성공적으로 치료하였다. 병력청취상 약 2주 전부터 하루에 12시간 이상 컴퓨터 게임을 하였으며, 이 외에 특별한 위험인자는 없었다. 현재 환자 상태는 양호하여 외래 추적관찰 중이며, 이 환자의 증례를 통하여 장시간의 컴퓨터 게임이 혈전용해술을 시행할 만큼 대량의 폐색전증을 발생할 수 있음을 알 수 있었고, 이에 대한 사회적인 인식 또한 필요할 것으로 사료된다.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.503-509
• /
• 2012

Objectives: This study was performed in order to evaluate the generation characteristics of airborne bacteria and fungi while operating a household humidifier, in consideration of user habits. Methods: Microbial samples were collected in a closed chamber with a total volume of 2.76 $m^3$, in which a humidifier was operated according to experimental strategies. A cultivation method based on the viable counts of mesophilic heterotrophic bacteria and fungi was performed. Experimental strategies were divided into three classes: the type of water in the water reservoir (tap water, cooled boiled water); the frequency of filling the reservoir (refill every day, no refill); and the sterilization method (sterilization function mode, humidifier disinfectants). Results: Significant increases in the concentration of airborne bacteria were observed while the humidifier was in operation. The concentration had increased to 2,407 $CFU/m^3$ by 120 hours when tap water filled the reservoir without any application of sterilization, while for cooled boiled water, it was merely 393 $CFU/m^3$ at a similar time point. Usages of disinfectant in the water tank were more effective in decreasing bioaerosol generation compared to sterilization function mode operation. Generation characteristics of airborne fungi were similar to those of bacteria, but the levels were not significant in all experiments. Calculated exposure factor can be used as an indicator to compare biorisk exposure. Conclusion: This study identified the potential for bioaerosol generation in indoor environments while operating a household humidifier. User practices were critical in the generation of bioaerosol, or more specifically, airborne bacteria. Proper usage of a humidifier ensures that any biorisks resulting from generated bioaerosol can be prevented.

• Composites Research
• /
• 제17권3호
• /
• pp.1-7
• /
• 2004

최근 대형 복합재료 구조물 성형에 적합한 공정으로 주목받는 vacuum assisted RTM (VARTM) 공정에 있어, 보강섬유의 조직 내부에 잔류하는 공기를 제거하여 기공함유율을 낮추는 기술의 중요성이 인식되고 있다. 거대기공 혹은 불완전 함침영역은 부적절한 주입구 및 공기배출구의 위치, 혹은 금형의 형상에 의해 발생한다. 미세기공은 불균일한 수지 유동선단의 속도로 인해 유동선단 부분에서 집중적으로 형성되며, 금형충전 공정 도중 수지와 함께 이동한다. 성형이 완료된 제품내의 잔류 기공들은 완성품의 물리적 성질을 저하 및 제품의 파손을 초래할 수 있다. 본 연구에서는 VARTM 공정에서의 기공의 형성 및 이동을 해석할 수 있는 통합된 거시적/미시적 해석 방법을 개발하였다. 수치해석 프로그램을 개발하여 VARTM 공정에서의 3차원 수지 유동을 해석하였으며, 그에 따른 거대기공 및 미세기공의 분포를 예측하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.21-24
• /
• 2015

New results of dependence of magnetic field, trapped by a stack of HTS tapes, on amount of tapes in a stack are reported. Commercial GdBCO tape 12 mm width and without Cu layer was used for the research. Tape was divided in square pieces $12{\times}12mm^2$ from which stacks were formed. Filling factor of the tape was about 1.4%. Measurements were carried out for stacks with height from 5 to 250 pieces and at wide temperature range from liquid helium to liquid nitrogen. Both FC (field cooling) and ZFC (zero field cooling) cooling methods were used in the research. These two methods show matching results with good accuracy. As a result dependences of trapped magnetic flux on amount of tapes for different temperatures were received. Research shows, that with increasing height of the stack trapped magnetic field value reach saturation at about 60 tapes in a stack for low temperatures. From 60 to 100 tapes increase of magnet flux is only 5%. Thus increase amount of tapes in a stack is not profitable. Also investigation of trapped magnet field relaxation was carried out. Relaxation speed decreases with increasing amount of elements. It means that the higher the stack is, the longer trapped flux will be held in cause of the same temperature.

• 천문학회지
• /
• 제34권4호
• /
• pp.309-311
• /
• 2001

Strong thermal X-ray emission, called Galactic Ridge X-ray Emission, is observed along the Galactic plane (Koyama et al. 1986). The origin of hot ($\~$7 keV) component of GRXE is not known, while cool ($\~$0.8 keV) one is associated with supernovae (Kaneda et al. 1997, Sugizaki et al. 2001). We propose a possible mechanism to explain the origin; locally strong magnetic fields of $B_{local}\;\~30{\mu}G$ heat interstellar gas to $\~$7 keV via magnetic reconnection (Tanuma et al. 1999). There will be the small-scale (< 10 pc) strong magnetic fields, which can be observed as $(B)_{obs} \;\~3{\mu}G$ by integration of Faraday Rotation Measure, if it is localized by a volume filling factor of f $\~$ 0.1. In order to examine this model, we solved three-dimensional (3D) resistive magnetohydrodynamic (MHD) equations numerically to examine the magnetic reconnect ion triggered by a supernova shock (fig.l). We assume that the magnetic field is Bx = 30tanh(y/20pc) $\mu$G, By = Bz = 0, and the temperature is uniform, at the initial condition. We put a supernova explosion outside the current sheet. The supernova-shock, as a result, triggers the magnetic reconnect ion, and the gas is heatd to > 7 keV. The magnetic reconnect ion heats the interstellar gas to $\~$7 keV in the Galactic plane, if it occurs in the locally strong magnetic fields of $B_{local}\;\~30{\mu}G$. The heated plasma is confined by the magnetic field for $\~10^{5.5} yr$. The required interval of the magnetic reconnect ions (triggered by anything) is $\~$1 - 10 yr. The magnetic reconnect ion will explain the origin of X-rays from the Galactic ridge, furthermore the Galactic halo, and clusters of galaxies.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1294-1301
• /
• 2001

In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.852-856
• /
• 2015

In this study, we investigate the effect of high-energy ball milling on thermoelectric transport properties in double-filled $CoSb_3$ skutterudite ($In_{0.2}Yb_{0.1}Co_4Sb_{12}$). $In_{0.2}Yb_{0.1}Co_4Sb_{12}$ powders are milled using high-energy ball milling for different periods of time (0, 5, 10, and 20 min), and the milled powders are consolidated into bulk samples by spark plasma sintering. Microstructure analysis shows that the high-energy ball milled bulk samples are composed of nano- and micro-grains. Because the filling fractions are reduced in the bulk samples due to the kinetic energy of the high-energy ball milling, the carrier concentration of the bulk samples decreases with the ball milling time. Furthermore, the mobility of the bulk samples also decreases with the ball milling time due to enhanced grain boundary scattering of electrons. Reduction of electrical conductivity by ball milling has a decisive effect on thermoelectric transport in the bulk samples, power factor decreases with the ball milling time.