• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.571-574
• /
• 2010

Surface recombination loss should be reduced for high efficiency of solar cells. To reduce this loss, the BSF (back surface field) is used. The BSF on the back of the p-type wafer forms a p+layer, which prevents the activity of electrons of the p-area for the rear recombination. As a result, the leakage current is reduced and the rear-contact has a good Ohmic contact. Therefore, the open-circuit-voltage (Voc) and fill factor (FF) of solar cells are increased. This paper investigates the formation of the rear contact process by comparing aluminum-paste (Al-paste) with pure aluminum-metal(99.9%). Under the vacuum evaporation process, pure aluminum-metal(99.9%) provides high conductivity and low contact resistance of $4.2\;m{\Omega}cm$, but It is difficult to apply the standard industrial process to it because high vacuum is needed, and it's more expensive than the commercial equipment. On the other hand, using the Al-paste process by screen printing is simple for the formation of metal contact, and it is possible to produce the standard industrial process. However, Al-paste used in screen printing is lower than the conductivity of pure aluminum-metal(99.9) because of its mass glass frit. In this study, contact resistances were measured by a 4-point probe. The contact resistance of pure aluminum-metal was $4.2\;m{\Omega}cm$ and that of Al-paste was $35.69\;m{\Omega}cm$. Then the rear contact was analyzed by scanning electron microscope (SEM).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.280-280
• /
• 2010

태양전지의 효율을 증가시키는 방법에는 표면 패시베이션, 접촉면적의 가변, back contact의 두께 가변 등이 있다. 특히, back contact 두께의 가변을 통하여 open circuit voltage의 감소를 최소화 할 수 있을 것이라고 전망 되고 있다. open circuit voltage 은 회로가 개방된 상태로, 무한대의 임피던스가 걸린 상태에서 빛을 받았을 때 태양전지의 양단에 전위차가 형성된다. 본 연구에서는 back contact 두께 가변에 따른, open circuit voltage의 변화를 확인하고 분석하는 것에 그 일차적인 초점을 두었다. 또한, open circuit voltage 뿐만 아니라, short circuit current density, fill factor, series resistance 등의 분석을 하였으며, efficiency를 계산하여 back contact 두께의 가변에 따른 소자 특성의 변화 분석을 통하여 최적화된 back contact위 두께를 연구하였다. 접촉면적에 따른 소자의 성능 변화는 후면 $SiN_X$ 70nm가 open circuit voltage를 15mV ~ 20mV 감소시키는 것을 확인 할 수 있었다. 그 이유는 $SiN_X$가 너무 두꺼우면 BSF 덜 형성되기 때문이다. 최종적으로 $SiN_X$ 두께를 얇게하면 open circuit voltage 의 감소를 최소화 할 수 있을 것이라는 판단을 할 수 있다. 이에, back contact인 $SiN_X$ 두께 가변에 따른 open circuit voltage의 변화를 확인하였다. $SiN_X$ 두께가 증가함에 따라, Positive charges 와 Hydrogen 함유량이 증가하며, 이에 BSF 두께 감소하였다. 또한, $SiN_X$ 두께가 감소함에 따라 Doping barrier로서 역할을 못하게 되어 후면에 n+층 형성되어 open circuit voltage가 급격히 하락하였다. 본 연구에서는 back contact인 $SiN_X$ 두께를 10nm, 30nm, 50nm, 80nm 로 가변하며 실험을 진행하였다.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.211-217
• /
• 2013

Two types of organic thin film solar cell devices with bulk hetero-junction (BHJ) structure were fabricated on plastic substrates using conjugated polymers of $PCDTBT:PC_{71}BM$ and $PTB7:PC_{71}BM$ blended as active channel layer. Time-variant characteristics of the organic thin film solar cell devices were investigated: short circuit current density ($J_{SC}$); open circuit voltage ($V_{OC}$); ; fill factor (FF); power conversion efficiency (PCE, ŋ). All the performance parameters were degraded by progress of the measurement time, while $V_{OC}$ showed the most drastic decrease with time. Possible factors to cause the time-variant alteration of performance parameters were discussed to be clarified.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.385-392
• /
• 2016

Recently in the display industry, demands for high-luminance and resolution of display devices have been steadily increasing. Generally, micro linear patterns are applied to an optical film in order to improve its properties of light. However, these patterns are easily viewed to eyes and moire phenomenon can be occurred. Micro random patterns are proposed as a method to solve these problems, increasing light-luminance and light-diffusion. However, conventional pattern manufacturing technologies have long processing times and high costs making it difficult to apply to large area molds. In order to combat this issue, micro-random patterns are formed by using a roll to plate indentation method along with abrasive paper tools composed of AlSiO2, SiC, and diamond grains. Also, forming properties, such as size and fill-factor of random patterns, are analyzed depending on type, mesh of abrasive paper tools, and indentation forces.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.315-324
• /
• 2004

In eddy current testing(ECT), differential probes have been frequently used since they .an reduce the number of parameters that influence ECT signals. However, differential signal is actually the difference of the two coils' impedance so that signal prediction and interpretation are not easy, On the other hand, absolute coil signal is rather straightforward to predict and analyze. Therefore, combined use of the two types of signals would increase the test reliability. In this paper, absolute coil signals from Inconel plate and tubes are predicted by the finite element analysis and efforts of lift-off, fill-factor, conductivity, operating frequency, test specimen thickness, inner diameter defects, and outer diameter defects are investigated. As a result, various impedance plane diagrams are drawn and analyzed. Significant practical knowldege about absolute signals is accumulated and similar characteristics of the two types of signal could be understood. Finally, slope angle versus defect depth calibration corves are prepared for three different frequencies.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.79-85
• /
• 2006

As the portable information appliance is developed, the demand of flat panel display equipments and parts are steeply increased. Most of all, the applications of LCD such as LCD TV, monitor, digital camera, CNS(car navigation system) and game machine become diversified. With the result that the number of BLU production enterprise is increased and the research on the design of backlight with the superior optical properties is persistently in progress. In this study we developed the pattern design tools for CCFL(cold cathode flourescent lamp) backlight to improve the conventional pattern design environment in which the pattern is designed manually from the experience and the trial and error. For the verification of our research, we designed the light reflection surface patterns for a real model of backlight and we measured the brightness uniformity using the BM-7. From the brightness uniformity measurement, the BLU designed using the presented tool showed the tolerable performance only in the first try of pattern design rather than the fifth try of pattern design in case of the conventional pattern design.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2496-2503
• /
• 2018

The short-term stability of high efficiency polymer : nonfullerene solar cells was investigated by employing a quick (ten cycles) current density-voltage (J-V) cycling method. Polymer : nonfullerene solar cells with initial power conversion efficiency (PCE) of >10% were fabricated using bulk heterojunction (BHJ) films of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5,7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). One set of the BHJ (PBDB-T : IT-M) films was thermally annealed at $160^{\circ}C$ for 30min, while another set was used without any thermal treatment after spin-coating. The quick J-V scan (cycling) measurement disclosed that the PCE decay was relatively slower for the annealed BHJ layers than the unannealed (as-cast) BHJ layers. As a result, after ten cycles, the annealed BHJ layers delivered higher PCE than the unannealed BHJ layers due to higher and more stable trend in fill factor. The present quick J-V cycling method is simple but expected to be useful for the prediction of short-term stability in organic solar cells.

• Journal of The Korean Association For Science Education
• /
• v.41 no.6
• /
• pp.533-542
• /
• 2021

This study aims to develop an instrument for measuring high school students' action competence on climate change (ACoCC). The instrument is defined as the construct comprised of seven factors and thirty-five items and takes approximately 15 minutes to fill out. A panel of experts and students' content validation were undertaken to modify the items. Five hundred and twenty-eight first and second graders in Korean high schools participated in the instrument survey. To assess the reliability and validity of ACoCC instrument, item analysis (mean, skewness, kurtosis, item-total correlation), internal consistency estimate, and confirmatory factor analysis were used. It was appropriate to use the 7-dimensional ACoCC instrument (knowledge about climate change, climate change sensibility, reflection, communication, integrated thinking, willingness, decision making), with 35 items for high school students. The following instrument was self-report given in the 5-point Likert scale (1=strongly disagree, 2=disagree, 3=neutral, 4=agree, 5=strongly agree). The internal consistency coefficient was shown as a whole was shown as 0.953, and the subscale's internal consistency coefficient ranged from 0.786 to 0.862.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.55-60
• /
• 2019

Polymer:nonfullerene solar cells with an inverted-type device structure were fabricated by employing the bulk heterojunction (BHJ) active layers, which are composed of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(6-methyl-2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). The BHJ layers were formed on a pre-patterned indium-tin oxide (ITO)-coated glass substrate by spin-coating using the blend solutions of PBDB-T and IT-M. The solar cell performances were investigated with respect to the cell position on the ITO-glass substrates. In addition, the short-term shelf lifetime of solar cells was tested by storing the PBDB-T:IT-M solar cells in a glovebox filled with inert gas. The results showed that the performance of solar cells was relatively higher for the cells close to the center of substrates, which was maintained even after storage for 24 h. In particular, the PCE of PBDB-T:IT-M solar cells was marginally decreased after storage for 24 h owing to the slightly reduced fill factor, even though the open circuit voltage was unchanged after 24 h.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.330-333
• /
• 2019

Various studies on dye-sensitized solar cells, which are cheaper to manufacture and have superior stability than silicon solar cells, are continuously conducted. In this study, the properties of dye-sensitized solar cells were studied using semiconductor oxides made by mixing $TiO_2$ and $Nb_2O_5$. By adding $Nb_2O_5$ in different proportions, the solar cell was made, and the surface area and electrical characteristics of this cell were measured. As $Nb_2O_5$ was added, the contact area of dye and electrolyte increased and the short-circuit current, open voltage, fill factor and conversion efficiency of dye-sensitized solar cells were confirmed to be improved.