• 한국방재학회 논문집
• /
• 제8권2호
• /
• pp.105-110
• /
• 2008

Flowable fill is generally a mixture of sand, fly ash, a small amount of cement and water. Sand is the major component of most flowable fill with waste materials. Various materials, including two waste foundry sands(WFS), an anti-corrosive waste foundry sand and natural soil, were used as a fine aggregate in this study. Natural sea sand was used for comparison. The flow behavior, hardening characteristics, and ultimate strength behavior of flowable fill were investigated. The unconfined compression test necessary to sustain walkability as the fresh flowable fill hardens was determined and the strength at 28-days appeared to correlate well with the water-to-cement ratio. The strength parameters, like cohesion and internal friction angle, were determined for the samples prepared by different curing times. The creep test for settlement potential was conducted. The data presented show that by-product foundry sand, an anti-corrosive WFS, and natural soil can be successfully used in controlled low strength materials(CLSM), and it provides similar or better properties to that of CLSM containing natural sea sand.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.719-725
• /
• 2005

본 연구는 생물학적 질소제거공정에서 국내 하수의 저C/N비로 인한 총질소 저하현상을 최소화 하기위한 방안으로 SBR 공정에서 유입수 주입방식의 변화를 포함한 세가지 운전모드에 대한 질소제거 효율을 평가하였다. 검토된 운전방식은 CO-SBR, IA-SBR, SF-SBR이며 lab-scale운전과 pilot-scale($2\;m^3/day$) 운전을 통해 검증하였다. 또한 질소제거를 위한 SBR공정에서 유입수량과 반응조의 비율과 유입수 간헐 주입비를 고려할 때 질소제거효율을 효과적으로 예측할 수 있는 방정식을 개발하여 질소제거율을 실제 운전결과와 비교 검토하였다. 유입수 주입방식의 변화가 탈질효율에 미치는 영향은 운전결과 SF-SBR이 90% 탈질율로서 가장 높은 탈질율을 나타냈고 IA-SBR이 61% 그리고 CO-SBR이 19%를 나타내었다. 또한 비 포기 유입시간의 길이가 슬러지 플럭에 미치는 영향은 비 포기 유입시간이 1시간 및 2시간의 경우의 플록의 밀도가 3시간의 경우보다 높아졌고 양호한 침강성을 나타냈으며 플록의 입도분포는 1시간 및 2시간의 경우가 $100{\sim}300\;{\mu}m$이고 3시간의 경우 $200{\sim}400\;{\mu}m$를 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.513-520
• /
• 1999

20 million tons of coal ash has been produced in Korea annually. This causes the environmental problems and the cost of land for ash pond. However the amount of coal ash for recycling is small because of the low level of recycling technology and the ignorance. As the coal ash has the significant engineering properties, it can be utilized as soft ground stabilizer, backfill materials and so forth. The purpose of this paper is to summarize some of the recycling methods of coal ash. One is structural backfill materials, the other is flowable fill. Optimal mixture ratio(fly ash : bottom ash) is determined for structural backfill materials and the model test is performed. The model test accompanied with physical tests were executed for identifying that the flowable fly ash can be used as fill materials such as trench back filling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.869-872
• /
• 2000

The aim of present work was to fabricate the piezoelectric composite materials of low megahertz applications such as non-destructive testing of materials. Among all the various composites, those with PZT rods embedded in Spurrs epoxy with regular periodicity (1-3 connectivity) was fabricated by dice and fill method. The fabricated size of the PZT cell were 0.18X0.18, 0.28X0.28mm$^2$, respectively. And the volume ratio of the PZT cell were 52, 64%, respectively. The resonant frequency and anti-resonant frequency of the composites were 3.5 MHz and 4.3MHz, respectively. The piezoelectric coupling coefficient were about 38 and 37% and the mechanical quality factor were about 12.7 and 22. These value were very different from these of bulk PZT Plate.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.27-27
• /
• 2007

Cu via fill 도금 시, void, seam과 같은 내부 defects는 공정 중 신뢰성을 떨어뜨리며, 전기신호 전달속도를 느리게 한다. 또한 Cu via fell 도금 공정 중 발생하는 과도한 Cu 표면 도금층은 wafer thenning 공정의 생산성 저하와 공정 비용 상승을 유발한다. 3D Interconnection용 직경 30${\mu}$m, 깊이 120${\mu}$m (Aspect Ratio : 4) Via를 이용하여 정류방법, 전류 parameter, 첨가제 조성에 따른 Cu via felling 특성과 overburden두께 변화를 실험적으로 검증하였다.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.81-92
• /
• 2011

본 연구에서는 흙 댐 구조물의 지진저항 특성을 파악하기 위하여 3가지 대표단면을 기초로 하여 축소모형의 비율에 해당하는 상사법칙을 고려하여 각각 1:100, 1:70, 1:50으로 토조를 제작하였다. 그리고 국내 설계기준에 준하여 장주기인 Hachinohe파, 단주기인 Ofunato파, 인공지진파를 가진하여 각 단면에 대해 가속도변화, 과잉간극수압, 수직 및 수평변위를 측정하고, 측정된 결과를 통하여 지반-구조물-유체의 상호작용에 따른 안정성을 평가하였다. 시험결과 시험 대상 단면의 변위는 지진 시 허용변위량 300mm에 비해 비교적 작은 변위로 지진 시 안정성을 확보하였다. 가속도 계측결과 Hachinohe파, Ofunato파는 할증률 20%정도로 평가되었지만 인공지진파는 할증률 30%정도로 평가되었다. 과잉간극수압비 측정결과 액상화 평가기준인 과잉간 극수압비 1이하로 모형단면은 액상화에 대해 안정성을 확보하였다.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.124-130
• /
• 2015

In many inventory situations, items for sales are generally stocked in a multiple of variations called stockkeeping units, such as size, color, style, and so on. For better management performance on sales items, proper and effective management is necessary for the stockkeeping units. In dealing with many items and those stockkeeping units, individual inventory analysis for each stockkeeping unit needs large amount of time or cost. Also the individual approach in inventory planning increases the demand variation of an item as the result by combining of demand variations of all stockkeeping units, accordingly the inventory turnover ratio and profitability are dropped down. This research suggests an effective method of systematic control of total stockkeeping units by generating from the total item basis, and shows how to reduce the safety stock and the average inventory with attaining a planned customer fill rate of the item and each stockkeeping units.

• 한국방재학회 논문집
• /
• 제7권2호통권25호
• /
• pp.35-44
• /
• 2007

일반적으로 유동성 뒤채움재는 모래, 플라이애쉬, 물과 소량의 시멘트를 혼합하여 이용한다. 플라이애쉬는 재활용재료로서 최근에 재활용 활용도가 매우 높아, 이를 대체할 대체제로서 해양준설토를 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 특성을 비교하기 일반바다모래를 이용한 혼합물을 이용하였다. 해양준설토를 이용한 유동성 뒤채움재의 흐름특성, 경화특성 및 일축압축강도 특성을 평가하였다. 유동성 뒤채움재의 초기 공용성평가를 위해 최적의 배합비에서 3일 양생한 시료의 강도 특성을 이용하였다. 시간에 따른 유동성 뒤채움재의 점착력과 내부마찰각을 평가하였다. 또한 차량하중에 의한 침하량을 평가하기 위하여 크리프시험을 수행하였다. 이동용 FWD를 이용하여 혼합재료의 탄성계수를 역산하였다. 이러한 실험결과로부터 해양준설토를 이용한 유동성 뒤채움재의 공학적 특성은 도로하부 지하매설물용 뒤채움재로서 충분한 것으로 판단되었다.

• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.59-62
• /
• 2009

In order to check the validation of LC simulation, 0.7 inch LCOS panel in full-HD resolution was fabricated and used for the electro-optical measurement. Compared the measured data with the calculated data, the averaged difference was 1.72% under 0 ~ +6 V bias on pixel electrode. To improve the optical characteristics of full-HD LCOS panel, the planar structure and trench structures (0.1 um, 0.2 um and 0.3 um-in-depth) between adjacent pixels were investigated with LC simulation. The planar structure showed the higher reflectance and faster reflectance-voltage response time than the trench structure. The optical fill factor and contrast ratio of planar structure were also higher than those of trench structures. As compared 1 um-in-depth trench structure resembled to the real structure with the planar structure, the optical fill factor was improved by 1.15% and the contrast ratio was improved by 5.26%. In order to minimize the loss of luminance and contrast ratio, the planar structure need to be applied between adjacent pixels.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.81-87
• /
• 2010

As enormous construction projects of land development are carried out around Korea, useful construction materials are needed to perform the construction projects. However, there are no more enough of fill and reclamation materials in our country. That is why the coal ash is expected to be utilized as an alternative material. Since the coal ash has the characteristics of a pozzolan and a selfhardening material, it is adjudged that coal ash has a great possibility to be used as a fill and reclamation material. In this study, grain size analysis, Atterberg limit test, and specific gravity test were performed to examine the physical characteristics of the coal ash about a self-hardening material before utilizing the coal ash in the construction. Compaction test, unconfined compression test were conducted to investigate the engineering characteristics according to mixture ratios of fly ash and bottom ash. As a result of the tests, it was confirmed that the mixing ratio 1:1 of fly ash and bottom ash is the most effective to use as a fill and reclamation material. If the mixture of coal ash is used as a backfill material with light weight around structure, it is expected to play a significant role in reducing earth pressure on the back of the structure. As described above, the coal ash should be considered as an alternative material of fill and reclamation materials since the result of the tests indicates that the coal ash is suitable to a useful material on the construction design.