• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.101-104
• /
• 2002

The influences of the powder packing density on the Bi-2223/Ag tape have been investigated. For packing powder, both method of uniaxial press and packed rod form made by cold isostatic press(CIP) have been applied. As the pressure of cold isostatic press(CIP) is increased, fill factor and critical current (Ic) of Bi-2223/Ag tape is increased. At a pressure of 2000kgf/cm$^2$, fill factor reach ∼3l% and this sample has the engineering current density(Je) value of ∼8.5kA/cm$^2$(Ic ∼77A, Jc ∼ 30kA/cm$^2$). The tape sample packed by uniaxial press method shows more sawsaging effect than the sample processed by cold isostatic press(CIP), resulting from inhomogity of powder distribution produced by the process of uniaxial press.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.554-560
• /
• 2001

Hydrophilic treatment of the packing materials in a cooling tower has been made by the ion assisted reaction (IAR) method to increase the wettability of the packing materials. The effects of hydrophilic treatment of packing materials on the performance of a cooling tower have been investigated in a wide range of operating parameters, such as water flow rate, air flow rate, and the water inlet temperature. A pilot cooling tower has been designed and built to model a counter-flow cooling tower. The results obtained indicate that the packing characteristic value with hydrophilic packing could be substantially increased by 6∼19.3% than that with conventional packing in the operating ranges considered. The correlations of the packing characteristic value as a function of water-to-air ratio are suggested for a counter-flow cooling tower with hydrophilic packing as well as with conventional packing.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.209-227
• /
• 2014

The use of limestone fines (LF) in mortar and concrete can in certain ways improve performance and thus has become more and more commonplace. However, although LF is generally regarded as a filler, it is up to now not clear how much filling effect it could have and how best the filling effect could be utilized. Herein, the packing density and filling effect of LF were studied by measuring the packing densities of LF, (LF + cement) blends and (LF + cement + fine aggregate) blends under dry and wet conditions, and measuring the performance of mortars made with various amounts of LF added. It was found that the addition of LF would not significantly increase the packing density of (LF + cement) blends but would fill into the paste to increase the paste volume and paste film thickness, and improve the flow spread and strength of mortar.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.93-98
• /
• 2005

The performance of cooling tower is dependent on the thermal performance of the packings. It's assessed by heat transfer rate and fan power. In this study, new packing was developed for application in compact type cross-flow cooling tower. The packing characteristic curve and the pressure drop curve were obtained by measuring packing characteristic values and pressure drops of small sized filler in comparison to existing mid-large sized filler. The heat transfer characteristics on small sized filler are about 66% higher than existing mid-large sized filler. The pressure drop characteristics on small sized filler are about two times of the pressure drop characteristics on existing mid-large sized filler.

• 한국항행학회논문지
• /
• 제15권5호
• /
• pp.781-788
• /
• 2011

Sphere-packing problem은 주어진 공간에 가능한 한 많은 구(sphere)를 채울 수 있는 배열을 찾는 문제이고 covering problem은 이에 쌍대적인 최적화의 문제로 코딩이론에 적용된다. 본 논문에서는 이진 코드이론에서의 가중치(weight)와 해밍거리(Hamming distance)에 대한 개념을 부울 대수(Boolean algebra)의 개념으로 일반화한다. 부울 대수에서의 가중치와 이를 이용하여 거리함수를 정의하고, 이들의 기본적인 성질들을 밝힌다. 또한, 부울 대수에서의 sphere-packing bound와 Gilbert-Varshamov bound의 정리를 증명한다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.468-474
• /
• 2005

SOx and NOx are known major precursors of acid rain and thus the abatement of their emissions is a major target in air pollution control. To obtain basic data on the removal process of simultaneous $SO_2/NO$, the optimal reaction condition and the composition of reaction solution for simultaneous removal of $SO_2/NO$, ware investigated using a bubble column reactor. Pilot scrubber was consisted of scrubber, filter and control box. Dust removal rate was 83, 92, and 97% with catalyst flux of 0.5, 0.8, 1.5 L/min, respectively Average dust removal efficiency with a kind of nozzle was about 94 and 90% in STS FF6.5 (5/8in.) and 14 of P.P W(1.0in.), respectively Dust and $SO_2$ were removed more than 98-96% regardless of reactor number. In the case of NO gas, removal yield of 83.3% was achieved after 48 hours in 1 stage, also removal yield of 95.7% was reached in 2 stages. In tile case of application of STS (5/8 in.) and P.P (1.0 in.) as used fill packing, removal efficiency was reached higher than 98% without related to of kind of fill packing.

• Journal of Korean Neurosurgical Society
• /
• 제48권2호
• /
• pp.115-118
• /
• 2010

Objective : Cerebral aneurysms which cause oculomotor nerve [cranial nerve (CN) III] palsy, are frequently found with a daughter sac of the aneurysm dome. We assumed that CN III might be compressed by the daughter sac and it would be more helpful not to fill the daughter sac with coils than vice versa during endosaccular embolization for recovering from CN III palsy, because it may give a greater chance for the daughter sac to shrink by itself later. We reviewed the initial results of our experiences of such cases. Methods : Among 9 aneurysms accompanied by CN III palsy, 7 (6 unruptured, 1 ruptured) showed a daughter sac. We tried to fill the main dome completely and spare the daughter sac from coil filling to increase the possibility of decompression. We evaluated the short-term effectiveness of this concept using medical records and angiograms. Results : After initial embolization, all of CN III palsy caused by unruptured aneurysms (6/6) resolved completely after various periods (3-90 days) of time. No adverse effects were noted during and after the procedures except for one case of harmless coil stretching during coil filling using double microcatheter. Conclusion : During the coil embolization of the cerebral aneurysm causing CN III palsy, sparing the daughter sac from coil packing while tightly packing the main dome, can be helpful in increasing the effectiveness of decompression. However, a long-term follow-up will be required.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.757-762
• /
• 2001

CFT concrete has high flowing, high strength and resistance to material separation to use skyscraper structure. It is considered that concrete could fill the lower part of Diaphragm up. This kinds of CFT concrete hardly apply to building below 20 stories. Using the common use strength concrete to building below 20 stories brings to reduce construction cost. This concrete is needed that valid fluidity and packing ability with unit cement content as common use strength concrete. Offering a fundamental data and proportioning in CFT concrete of below 20 stories, it is executed basic property test, analysis of proportioning and mock up test.

• 한국항행학회논문지
• /
• 제25권3호
• /
• pp.211-216
• /
• 2021

다수 무인기를 이용한 시스템은 정찰, 네트워킹, 항공 촬영 등 다양한 목적으로 활용되고 있다. 이러한 시스템에서 다수 무인기로 구성된 대형을 형성하고 유지하는 것은 필수적이다. 본 논문에서는 다수 무인기의 대형을 형성하기 위한 자율화된 분산형 제어를 수행하는 알고리즘을 제안하였다. 제어명령은 근접 무인기 또는 임무 영역으로부터 서로 밀어내는 방향으로 작용하는 2차 시스템 형태의 힘을 고려하였다. 제어명령은 외부의 개입 없이 계측과 통신으로부터 획득되는 상대위치/속도를 통해 계산된다. 이는 개별 무인기들이 기준거리를 추종하도록 하며 임무영역 안에 겹치지 않고 최대한 조밀하게 배치되도록 한다. 기준거리 결정에는 채우기 문제를 풀기 위한 최적화 기법과 유사한 방식을 적용하였다. 임무영역은 형성하고자 하는 대형의 외곽선으로 정의되며 임무에 따라 유동적으로 설정될 수 있다. 제안한 알고리즘의 성능을 확인하기 위하여 수치 시뮬레이션을 수행하였다. 복잡성과 확장성을 고려한 영역에서 약 26.94초에 대형이 형성되며 약 71.91%의 채우기 밀도를 가지는 것을 확인하였다.

• Animal Bioscience
• /
• 제34권11호
• /
• pp.1776-1783
• /
• 2021

Objective: This project aimed to evaluate the effects of both different additives and filling methods on nutritive quality, fermentation profile, and in situ digestibility of whole plant corn silage. Methods: Whole plant corn forage harvested at 26.72% dry matter (DM) was chopped and treated with two filling methods, i) fill silos at one time (F1), ii) fill silos at three times (F3), packing samples into one/three silo capacity at the first day, another one/three capacity at the second day, then one/three at the third day, three replicates. For each replicate, samples were treated with three additives, i) control (CTRL, no additive), ii) Sila-Max (MAX, Ralco Nutrition Inc., Marshall, MN, USA), and iii) Sila-Mix (MIX, Ralco Nutrition Inc., USA). With three replicates of each secondary treatment, there were nine silos, 54 silos in total. Each silo had a packing density of 137.61 kg of DM/m3. All silos were weighed and stored in lab at ambient temperature. Results: After 60 d of ensiling, all items showed good silage fermentation under MAX filled one time or three times (p<0.01). Higher silage quality for all additives was obtained at filling one time than that filled three times (p<0.01). The highest DM and lowest DM loss rate (DMLR) occurred to MAX treatment at two filling methods (p<0.01); Digestibility of acid detergent fiber, neutral detergent fiber (NDF), and curde protein had the same results as silage quality (p<0.01). Yield of digestible DM and digestible NDF also showed higher value under MAX especially for filling one time (p<0.05). Conclusion: All corn silages showed good fermentation attributes (pH<4.0). The forage filled one time had higher silage quality than that filled three times (p<0.01). MAX with homofermentative lactic acid bacteria enhanced the lactic acid fermentation, silage quality and nutrient digestibility, and so improved the digestible nutrient yield.