• KIEAE Journal
• /
• v.17 no.3
• /
• pp.75-81
• /
• 2017

Purpose: The energy consumption of apartment units is affected by the lifestyle of the residents rather than system technology. In this study the numerical analysis of assumed energy consumption correlation factors with arbitrary value due to uncertainty. It is intended to be used as a simulation correction value which can be utilized as a predicted value of actual energy usage. The correction value of the simulation is set in the developed form of the existing process that derives the actual usage amount. The simulation results used in the existing evaluation system are used to maintain the useful value as the current system evaluation scale and predict the actual capacity. Method: The method of the study is to statistically analyze the data frames of all complexes capable of collecting the annual energy usage and to reconstruct the population by adding the variables that are expected to be correlated. Repeat the data frame configuration with variables that are assumed to be highly correlated with energy use levels. Determine whether there is correlation or not. The intensity of the external characteristics of the building equipment related to the energy consumption is presented as the quantitative value. Result: The correlation between electricity consumption and trading price since 2010 is analyzed as (Correlation coefficient 0.82). These results are higher than (Correlation coefficient 0.79), which is the correlation between residential area and trading price. This paper signifies the starting point of the methodology that broadens the field of view of verification of simulation feasibility limited to the prediction technique focused on the simulation tool and the element technology scope.The diversified phenomenon reproduction method develops the existing energy simulation method.It can be completed with a simulation methodology that can infer actual energy consumption.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.1-11
• /
• 2016

There has been an increasingly high interest in gardens and garden design in Korea recently. However, the usage of the term 'garden' is extremely varied and complex, and there has been very little academic research made on the meaning of garden. Therefore, this research attempts to investigate the ideas of current gardens and to elucidate their changing patterns by means of extensive literature research and big data analysis. The notion of garden in the past was broad including not only private space such as Madang(마당) and Teul(뜰), but also even field and grass land as public outdoor space. Yet, the meaning has become smaller to merely private space due to the change of dwelling systems due to high industrial development of the 20th century. Furthermore, the introduction of urban parks as an interactive space between nature and humans, the similar spatial function of gardens, has blurred the boundary between garden and park, which created confusion in understanding the concept of a garden. After all, garden is a subject for humans. The meanings of garden need to be recognized from various points of view since garden itself is a creation by the sum of diverse fields such as natural and social sciences as well as culturology. This discussion on the meaning of garden in the present day will give a conceptual foundation for future research on gardens and garden design. Also, the big data analysis employed here as a research method can help other similar research topics, particularly semantics in landscape architecture.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.167-171
• /
• 2012

This paper reports on the stray light analysis results of a compact imaging spectrometer (COMIS) for a microsatellite STSAT-3. COMIS images Earth's surface and atmosphere with ground sampling distances of 27 m at the 18~62 spectral bands (0.4 ~ 1.05 ${\mu}m$) for the nadir looking at an altitude of 700 km. COMIS has an imaging telescope and an imaging spectrometer box into which three electronics PCBs are embedded. The telescope images a $27m{\times}28km$ area of Earth surface onto a slit of dimensions $11.8{\mu}m{\times}12.1mm$. This corresponds to a ground sampling distance of 27 m and a swath width of 28 km for nadir looking posture at an altitude of 700 km. Then the optics relays and disperses the slit image onto the detector thereby producing a monochrome image of the entrance slit formed on each row of detector elements. The spectrum of each point in the row is imaged along a detector column. The optical mounts and housing structures are designed in order to prevent stray light from arriving onto the image and so deteriorating the signal to noise ratio (SNR). The stray light analysis, performed by a non-sequential ray tracing software (LightTools) with three dimensional housing and lens modeling, confirms that the ghost and stray light arriving at the detector plane has the relative intensity of ${\sim}10^{-5}$ and furthermore it locates outside the concerned image size i.e. the field of view of the optics.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.29-33
• /
• 2019

With shrinking form factor and improving performance of electronic packages, high input/output (I/O) density is considered as an important factor. Fan out wafer-level packaging (FO-WLP) has been paid great attention as an alternative. However, FO-WLP is vulnerable to warpage during its manufacturing process. Minimizing warpage is essential for controlling production yield, and in turn, package reliability. While many studies investigated the effect of process and design parameters on warpage using finite element analysis, they did not take uncertainty into consideration. As parameters, including material properties, chip positions, have uncertainty from the point of manufacturing view, the uncertainty should be considered to reduce the gap between the results from the field and the finite element analysis. This paper focuses on the effect of uncertainty of Young's modulus of chip on fan-out wafer level packaging warpage using finite element analysis. It is assumed that Young's modulus of each chip follows the normal distribution. Simulation results show that the uncertainty of Young's modulus affects the maximum von Mises stress. As a result, it is necessary to control the uncertainty of Young's modulus of silicon chip since the maximum von Mises stress is a parameter related to the package reliability.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.522-526
• /
• 2007

Since newly emerged disease, the Severe Acute Respiratory Syndrome (SARS), spread from Asia to North America and Europe rapidly in 2003, many researchers have tried to determine where the virus came from. In the phylogenetic point of view, SARS virus has been known to be one of the genus Coronavirus, but, the overall conservation of SARS virus sequence was not highly similar to that of known coronaviruses. The natural reservoirs of SARS-CoV are not clearly determined, yet. In the present study, the genomic sequences of SARS-CoV were analyzed by bioinformatics techniques such as multiple sequence alignment and phylogenetic analysis methods as well multivariate statistical analysis. All the calculating processes, including calculations of the relative synonymous codon usage (RSCU) and other genomic parameters using 30,305 coding sequences from the two genera, Coronavirus, and Lentivirus, and one family, Orthomyxoviridae, were performed on SMP cluster in KISTI, Supercomputing Center. As a result, SARS_CoV showed very similar RSCU patterns with feline coronavirus on the both axes of the correspondence analysis, and this result showed more agreeable results with serological results for SARS_CoV than that of phylogenetic result itself. In addition, SARS_CoV, human immunodeficiency virus, and influenza A virus commonly showed the very low RSCU differences among each synonymous codon group, and this low RSCU bias might provide some advantages for them to be transmitted from other species into human beings more successfully. Large-scale genomic analysis using bioinformatics techniques may be useful in genetic epidemiology field effectively.

• Journal of Food Hygiene and Safety
• /
• v.1 no.1
• /
• pp.77-95
• /
• 1986

In 1962 the governing bodies of FAO and WHO approved the establishment of a joint FAO/WHO Food Standards Programme, the creation of a jointly sponsored body to be known as the Codex Alimentarius commission to implement the Programme. It can reasonably be claimed that the Commission has assumad the leading role in establishing internation food standards throughout the world. The Codex Committee of Food Hygiene has received much advice and assistance from other international organization which have been working in this field for a number of years. In particular, it has received valuable background documentation from the International Commission on Microbiological Specifications for Foods(ICMSF) which was set up by the International Association of Microbiological Societies(IAMS), and also from the International Organization for Standardization (ISO). Nevertheless, in spite of the information supplied by governments and research bodies in this field, microbiological standards have proved to be a highly controversial subject from the point of view of Codex standards. When it is decided to establish a microbiological standard for a food or class of foods, the following technical and administrative aspects must be considered: 1) The standard should be based on factual studies and serve one or more of the following objectives: (1) to determine the conditions of hygiene under which the food should be manufactured; (2) to minimize the hazards to public health; (3) to measure the keeping quality and storage potential of the food 2) The standard should be attainable under practicable operating and commercial conditions and should not entail the use of excessive heat treatment or the additions of extra preservatives. 3) The standard should be determined after investigation of the processing operation. 4) The standard should be as simple and inexpensive to administer as possible, the number of tests being kept to a minimum. 5) Details of methods to be used for sampling, examining and reporting should accompany all published microbiological standards. 6) In establishing tolerance levels for the permissible number of defective samples, allowance should be made for sampling and other variations due to differences in the laboratory methods. The following additional points should be kept in mind: 1) It is not satisfactory to establish one set of microbiological standards for a miscellaneous group of foods, such as“frozen foods”or“precooked foods”. 2) Microbiological standards should be applied first to the more hazardous types of food on the basis of experience of expected microbiological levels, taking into account variations in composition, processing procedures, and storage. 3) When a standard is established, there should be a definite relationship between the standard and the hazard against which it is meant to protect the public. 4) The sensitivity, reliability, and reproducibility of the sampling and analytical methods should be compared in different laboratories and the methods to be used should be specified in detail as part of the standard. 5) Tolerances should be included in the standard to account for inaccuracies of sampling and analysis. 6) Standards should be applied on a voluntary basis before compliance is made mandatory.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2020

In general, auto parts production assembly line is assembled and produced by automatic mounting by an automated robot. In such a production site, quality problems such as misalignment of parts (doors, trunks, roofs, etc.) to be assembled with the vehicle body or collision between assembly robots and components are often caused. In order to solve such a problem, the quality of parts is manually inspected by using mechanical jig devices outside the automated production line. Automotive inspection technology is the most commonly used field of vision, which includes surface inspection such as mounting hole spacing and defect detection, body panel dents and bends. It is used for guiding, providing location information to the robot controller to adjust the robot's path to improve process productivity and manufacturing flexibility. The most difficult weighing and measuring technology is to calibrate the surface analysis and position and characteristics between parts by storing images of the part to be measured that enters the camera's field of view mounted on the side or top of the part. The problem of the machine vision device applied to the automobile production line is that the lighting conditions inside the factory are severely changed due to various weather changes such as morning-evening, rainy days and sunny days through the exterior window of the assembly production plant. In addition, since the material of the vehicle body parts is a steel sheet, the reflection of light is very severe, which causes a problem in that the quality of the captured image is greatly changed even with a small light change. In this study, the distance between the car body and the door part and the door are acquired by the measuring device combining the laser slit light source and the LED pattern light source. The result is transferred to the joint robot for assembling parts at the optimum position between parts, and the assembly is done at the optimal position by changing the angle and step.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.48-61
• /
• 1989

In this paper, two-dimensional numerical simulation of GaAs MESFFT with 0.7${\mu}m$ gate length is perfomed. Drift-diffusion model which consider that mobility is a function of local electric field, is used. As a discretization method, instead of FDM (finite difference method) and FEM (finite element method), the Control-Volume Formulation (CVF) is used and as a numerical scheme current hybrid scheme or upwind scheme is replaced by power-law scheme which is very approximate to exponential scheme. In the process of numerical analysis, Peclet number which represents the velocity ratio of drift and diffusion, is introduced. And using this concept a current equation which consider numerical scheme at the interface of control volume, is proposed. The I-V characteristics using the model and numerical method has a good agreement with that of previous paper by others. Therefore, it is confined that it may be useful as a simulator for GaAs MESFET. Besides I-V characteristics, the mechanism of both velocity saturation in drift-diffusion model is described from the view of velocity and electric field distribution at the bottom of the channel. In addition, the relationship between the mechanism and position of dipole and drain current, are described.

• Cross-Cultural Studies
• /
• v.43
• /
• pp.207-239
• /
• 2016

The Altai Humanities Belt connecting Siberia to Central Asia is very important to the history of civilization. It had a huge influence on the formation of an ancient civilization in the Korean Peninsula. Therefore, a variety of studies have been carried out in the field of folklore and anthropology as well as archeology. One of these studies is about the oral epic. The oral epic remains in the form of a unique transmission in Korea, but it wasn't that long ago when it was noted as the component of the Altai Humanities Belt. In that context, some epics from Central Asia, Mongolia, and Siberia were introduced to Korea. This preliminary investigation is conducted to introduce the oral epic Olonkho from Yakutia in Siberia to Korean academia. Although it was revealed recently, Olonkho is highly valued. The epic study has been buried from the Western point of view, but Olonkho is expected to provide a global perspective to the field of epic study. Above all, it contains a very significant clue to a new study because the content and the style of performance are considerably different from those of the West. Additionally, the original form is relatively well preserved. In particular, it explains how human thinking and behaviors have changed in the transition from the mythical age to the heroic age. This change appears in the ethnic history of Yakutia, as well as in the formation process for all Altai countries around the 10th century. Therefore, this preliminary investigation will be a foundation to facilitate the translation of the voluminous Olonkho into Korean, and to conduct full-fledged research on it. In particular, it can motivate a study on the differences and similarities in comparison to the tradition of oral epics between Central Asia and the Korean Peninsula. Furthermore, it will serve as a foundation for the formation of the Altai Humanities Belt.

• Journal of Distribution Research
• /
• v.10 no.3
• /
• pp.15-36
• /
• 2005

This study is concerned with selling alliance in the internet shopping services, which is generally used by portal sites in recent and that is a typical form of strategic alliance. This study tried to find the relationship between. consumer's attitude and alliance performance. The authors investigated them in the field. then searched the reasons and determinants of selling alliance performance. As a result of field investigation, the authors found that the traffic of the portal site was not proportionated to the sales of internet shopping mall and this was not consistent with general expectation, With the analysis of it, the authors found that attitudes to the sites (brands) allianced in On-line and recognition of fitting between them had influenced positively on the attitude and purchase intention to alliance services. Moreover, unlike the attitude to the portal sites, the attitude to the internet shopping mall had positively influenced directly on the purchase intention. The other hand. from the view of influence power on the attitude to the allianced shopping service, the recognition of fitting between the sites was the factor which had the least effect of all factors. Compared with Off-line, this is interesting aspect of On-line. So in the On-line selling alliance, be careful of consideration for not only prior attitudes to the partners(portal and shopping mall) but also the fitness between them and make it in the mind that the attitude to shopping mall has greater influence upon the purchase intention than that to portal site.