• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1237-1244
• /
• 2006

This research discussed about method for basis construction of sea jacket construction. Several access ways of method for foundation construction of sea jacket construction are used. Accompany many efforts of design and build process to overcome the form of construction work and application equipment, special quality of construction and restriction and so on of sea environment in the case of pile foundation. Therefore, great many factor of sea condition, construction special quality, base condition, construction time, equipment composition, worker composition etc. shows other work form in spot at sea jacket construction process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.657-662
• /
• 1997

In these day, there have been shortage of construction workers and an increase of labor cost in our county. In order to overcome these problems, prefabricated and mechanized system of bar placing have been used in the construction fields. As a part of this tendency, welded wire fabric(WWF) reinforcement were studied several years ago. In this study, the required working hour. the labor power and the construction process of WWF reinforcement for the apartment building slabs are reported. From the result of field investigations, it is showed that the WWF reinforcement facilitates the field placing and the working time of WWF placing is saved, and then the labor cost of WWF reinforcement is less than that of the conventional bar reinforcement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2107-2114
• /
• 2011

To carry out the evaluation of performance of railway product/system, 3 step verification process(design review-lab test-field test) should be done. In advanced countries, for the effective field test, test-only-oriented track have been constructed and used. In Korea, government announced "The construction plan of railroad test track" at 2009.06. This paper will summarize 'need of test track', 'technical meaning of test track', 'current status of foreign test track', 'fundamental plan and process strategy of Korea Railroad Test Track'. It is no need to say that the wisdom of all railroad related people is required for the successful construction and usage of Korea Railroad Test Track.

• 한국건설관리학회논문집
• /
• 제22권6호
• /
• pp.138-146
• /
• 2021

철근콘크리트 구조물내 교차된 양단 135° 표준갈고리 작업성을 향상시키기기 위하여 한쪽 90° 갈고리에 결속 보강함으로서 135° 표준갈고리와 대등한 성능을 발휘하는 원터치 방식의 철근보강클립(RCC장치)을 제안하였으며, 다양한 성능실험과 해석, 시공성 평가 및 경제성 분석을 통하여 개발 완료하였다. 2020년 6월부터 적용된 총 13개 현장을 분석한 결과, 개발할 당시의 예상한 것과 같이 구조감리나 공사감독관의 지적에 대해 불가항력적인 조치사항으로 적용하는 사례가 대부분이었다. 그러므로 현장성과분석을 통하여 효율적이고 자발적인 철근보강클립의 사용을 위해 원도급자가 우선 구매 후 협력엽체와 계약한 다음 제공하는 방식 등의 여러방식을 제안하였다. 결과적으로 철근보강클립을 적극적인 활용함으로써 현장에서 품질과 공정관리 측면에서 기여도가 매우 클 것으로 예상된다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.709-712
• /
• 1996

Generating a project network of a specific construction project is very time consuming and difficult task in the field. To effectiviely automate and support the planning process, we design a case-based project planning expert system inspired by the fact a human expert project planner uses previous cases for planning a new project. A construction project case consist of its specific characteristics and the corresponding project network (i.e. project plan). Using frame based representation. we represent the project features affecting the progress network and the entities composing the project plan such as the buildings, construction methods, WBS (work breakdown structure), activities, and resources. The project planning process runs through most similar case retrieval, case adaptation, and user requirement satisfaction. We represent the construction domain knowledge for each procedure using constraints and rules. We develop the methodology for constraint-based case adaption. Case adaptation process mainly consist of activity generation/deletion and predecence constraint satisfaction, for which we develop the dynamic constraint generation method and connect user-level requirement representation the system-level network modification knowledge. The methodology is being applied to the prototype for apartment construction project planning.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.149-156
• /
• 2002

Field measurements were carried out in this study to investigate the behavior of cut and cover tunnel such as the distribution and the magnitude of the earth pressure during back fill process of the ground material. Three kinds of measuring instruments, such as the earth pressure load cell, the concrete strain gauge and the reinforcing bar meter of embedded type in concrete structure were installed and measured. Earth pressure load cells, installed after construction of the tunnel lining, measure the outside forces acting on the tunnel lining with radial directions. Three load cells were installed at the crown, the right and the left shoulder of the tunnel, respectively. Three sets of reinforcing bar meter were installed in the double reinforcements of the tunnel lining and their locations were the same with the position of the earth pressure load cells. Concrete strain gauge was installed only one site of the upper compressive part at the tunnel crown. Based on the measuring results in the field, the deformation and the earth pressure acting on the tunnel lining were investigated with the back fill process of the ground material. Considerations on the validity of the measuring results were paid. For the analysis of measurements, after dividing back fill process into three steps, various factors which affect on the behavior of tunnel lining were investigated at each step.

• 한국실내디자인학회논문집
• /
• 제26권3호
• /
• pp.71-80
• /
• 2017

Korea is facing various social problems including single elderly household, increase in the number of disabled people and poverty rate and a difference in the proportion of males to females between urban areas and rural areas along with the advent of rapid aging society. Especially, the ratio of poor households in rural areas residing in housing which falls below the minimum housing level and most of them are in the dead zone of housing welfare. In addition, if it is impossible for them to move (relocate) to new housing, the house remodeling is the only measure for improving their housing welfare. However, we don't have enough prior relevant academic and practical experience, and house remodeling requires a series of process including prior planning construction and post-occupancy evaluation, but almost no fundamental research that provides relevant insight has been carried out. Therefore, the purpose of this study is to describe all field situations that occur in the whole customized house remodeling process for disabled female senior citizens living alone in a rural area. The remodeling process was classified into initial planning stage, field verification and adjustment stage and construction stage as the method to participate in the field directly, and any change in the remodeling plan and its causes at each stage were analyzed. As a result, some remodeling items were changed from the main viewpoint of participating parties before the beginning of construction and for reasons such as the deterioration level of housing site, limitation in building equipment and rearrangement of housing, etc., and the remodeling method and its details were developed. It was identified that constant change that occurred in the remodeling process resulted from 1) unique poor characteristics of existing housing and 2) physical condition of residents and their unique lifestyle characteristics that were two aspects required to be emphasized by customized remodeling.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.247-248
• /
• 2016

Globally the interest of large-scale structure has been increasing for the use in various social and cultural events. However various problems for building large-scale structure in South Korea are expected in terms of construction method and site management due to the lack of experience. Construction method and planning significantly affects on making decisions. There are only theoretical approach for constructing large-scale building in domestic with the limited experience of constructing constrained size structure. Through Analytic Hierarchy Process with experts, derived decision factors mostly used construction method in construction of large-scale structure. Derived factors from this study will support making decisions for field management in constructing large-scale structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.308-309
• /
• 2018

Construction automation is needed to improve construction productivity. 3D printing is a key technology of the 4th industrial revolution, and when applied to the construction field, the ripple effect is very large. In this paper, we propose a 3D printing method that can predict the 3D printing process and estimate the construction duration for each process. Through literature review and expert consultation, eight 3D printing activities for structure work were derived. Construction duration and cost estimation for each activity will be needed in the future research.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.250-251
• /
• 2021

A subcontract work order is the basis of the construction process and consists of the root and trunk of the construction industry. The construction process through a subcontract work order is an important element of project success, and it is the basic unit of creating profit in the construction industry. Therefore, correct analysis and forecasting of subcontract work orders allow correct estimation of construction cost and profit which is the foundation of corporate decision making. This study has started to provide predictions of subcontractor's bidding-ratio for decision-making. Since the actual project data has been used in this study, the contribution level of the model is highly expected in actual field. The statistical confidential level of adjusted decision coefficient is concluded low because of limited sample numbers. However, its accuracy and confidence level can be increased through increasing sample numbers, considering more variables, and studying of reducing error.