• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.115-121
• /
• 2013

Purpose: Latest linear accelerator and the introduction of new measurement equipment to the agency that the introduction of this equipment in the future, by analyzing the process of confirming the usefulness of the preparation process for applying it in the clinical causes some problems, should be helpful. Materials and Methods: All measurements TrueBEAM STX (Varian, USA) was used, and a file specific to each energy, irradiation conditions, the dose distribution was calculated using a computerized treatment planning equipment (Eclipse ver 10.0.39, Varian, USA). Measuring performance and cause errors in MapCHECK 2 were analyzed and measured against. In order to verify the performance of the MapCHECK 2, 6X, 6X-FFF, 10X, 10X-FFF, 15X field size $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$ direction was measured by the energy. IGRT couch of the CT values affect the measurements in order to confirm, CT number values : -800 (Carbon) & -950 (COUCH in the air), -100 & 6X-950 in the state for FFF, 15X of the energy field sizes $10{\times}10$, gantry $180^{\circ}$, $135^{\circ}$, $275^{\circ}$ directionwas measured at, MapPHAN allocated to confirm the value of HU were compared, using the treatment planning computer for, Measurement error problem by the sharp edges MapPHAN Learn gantry direction MapPHAN of dependence was measured in three ways. GANTRY $90^{\circ}$, $270^{\circ}$ in the direction of the vertically erected settings 6X-FFF, 15X respectively, and Setting the state established as a horizontal field sizes $10{\times}10$, $90^{\circ}$, $45^{\circ}$, $315^{\circ}$, $270^{\circ}$ of in the direction of the energy-6X-FFF, 15X, respectively, were measured. Without intensity modulated beam of the third open arc were investigated. Results: Of basic performance MapCHECK confirm the attenuation measured by Couch, measured from the measured HU values that are assigned to the MAP-PHAN, check for calculation accuracy for the angled edge of the MapPHAN all come in a range of valid measurement errors do not affect the could see. three ways for the Gantry direction dependence, the first of the meter built into the value of the Gantry $270^{\circ}$ (relative $0^{\circ}$), $90^{\circ}$ (relative $180^{\circ}$), 6X-FFF, 15X from each -1.51, 0.83% and -0.63, -0.22% was not affected by the AP/PA direction represented. Setting the meter horizontally Gantry $90^{\circ}$, $270^{\circ}$ from the couch, Energy 6X-FFF 4.37, 2.84%, 15X, -9.63, -13.32% the difference. By-side direction measurements MapPHAN in value is not within the valid range can not, because that could be confirmed as gamma pass rate 3% of the value is greater than the value shown. You can check the Open Arc 6X-FFF, 15X energy, field size $10{\times}10$ cm $360^{\circ}$ rotation of the dose distribution in the state to look at nearly 90% pass rate to emerge. Conclusion: Based on the above results, the MapPHAN gantry direction dependence by side in the direction of the beam relative dose distribution suitable for measuring the gamma value, but accurate measurement of the absolute dose can not be considered is. this paper, a more accurate treatment plan in order to confirm, Reduce the tolerance for VMAT, such as lateral rotation investigation in order to measure accurate absolute isodose using a combination of IMF (Isocentric Mounting Fixture) MapCHEK 2, will be able to minimize the impact due to the angular dependence.

• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.68-81
• /
• 2002

The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Health states is adopted by standardized health inspecting instrumental table (Cornell Medical Index:CMI) which is designed for Korean people by Ko and Park(1980) Statistic average and standard deviation were generated by using SPSS PC+, t=test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by c(t=2.28, p=.023). 2) Stress coping style of whole students were highly and affirmatively dedicated to research. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation. 3) In view of nursing students' physical health states, there is significant difference in past history(t=2.50, p=.013) and in case of mental health states, there are considerable discrepancies between lower group(73.52) and upper group(75.11)(p<.05). In view of all field, state of tension(t=2.13, p=.048) has difference. 4) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, In type NP, sequences such as the central point of problem, In type A, the central point of problem, In type FC, hopeful aspect and In type AC, hopeful aspect and indifference were derived significantly different (p<.05). 5) While verifying health state differences in the level of lower and upper ego states, In type FC, low level group(150.29) marked higher point than upper group(145.19), there is remarkable discrepancy and so did whole health state(p=.014), In type AC both mental state(p=.000) and whole health state (p=.015) showed differences. 6) When analyzing correlations between whole students' ego states, copying style and health state, all type of ego state showed differences(p<.001). In correlations between ego state and health state, in type FC physical state had an apex and there are inverse correlations among the other types. Especially, type FC showed inverse correlations with great discrepancies(p<.05). In mental state, type NP(${\gamma}=.198$, p<.001) and type A(${\gamma}=.166$, p<.05) represented straight correlations with remarkable differences. Especially, In type AC showed inverse correlations(${\gamma}=.282$, p<.001). In case of correlations between copying style and health state, indifference(${\gamma}=-.157$) and relaxation of tension(${\gamma}=-.158$) presented great difference(p<.05). In mental state, central point of problem and search for social support showed straight correlations with great discrepancies(p<.05), hopeful aspect and indifference showed inverse correlations with considerable differences(p<.001).

• Women's Health Nursing
• /
• v.7 no.1
• /
• pp.93-106
• /
• 2001

The purpose of this study is to provide the basic data in order to develop of some educational programs for increasing breast feeding by studying the female university student's knowledge and attitude on breast feeding, who will become a mother in future. The respondents of this research were selected at random for 462 female students at the university in Seoul and Kyongki area, and it was the period collected the data from Oct 28, 2000 to Nov 8, 2000. The method of study distributed the measuring tools of knowledge with 33 items and the tools of measurement with 20 items on the attitude of breast feeding to the respondents directly, and collected them. The data were analyzed to use SPSS program. Unpaired t-test, ANOVA, Pearson correlation coefficient and Multiple regression analysis were used for the calculation of difference between groups and the results were as follows ; 1. The breast feeding was 50.6% in the period of lactation for the respondents and the nuclear families were 81.7% in family constituent unit. In the future the wisher of breast feeding was 91.5%, the medical personnel was a major informer who enjoyed their best confidence, Besides the respond-ents responded that the proper period for education of the breast feeding was in a high school. 2. The level of Knowledge on breast feeding. The respondents's knowledge on breast feeding was average $16.40{\pm}4.59$ points on the basis of 33 points and On the merits and demerits ratio of breast feeding has shown highest but there was low in the field of such a concrete and practical plan as the estimate of breast feeding and the method and mindfulness for breast feeding. The higher grader, the college of the natural science showed significantly the higher points in the knowledge degree by respondents's characters and in such cases the persons of breast feeding or the informed of breast feeding by a medical personnel or the women of strong will for breast feeding action in the future. 3. The Attitude on breast feeding. There was relatively shown a positive attitude of the total average $60.50{\pm}7.59$ points and the average evaluation $3.04{\pm}.36$ points in the attitude on breast feeding. The attitude by each factors has the highest points in the practical action aspect but the lowest in the emotional aspect. The attitude on breast feeding by respondents's characters significantly showed a positive attitude in such cases the persons of breast feeding or the informed of breast feeding or the women of strong will for breast feeding action in the future. 4. Relation to knowledge and attitude on breast feeding. There was shown a correlation of definition in the relation to knowledge and attitude on breast feeding, 5.Factors which have an effect on knowledge and attitude on breast feeding. The factors which have an effect on knowledge of breast feeding were attitudes on breast feeding, graders, the college of natural science and the informed of breast feeding. Also the factors which have an effect on attitude on breast feeding were on will and knowledge on breast feeding, a large family, the informed of breast feeding. In conclusion, it will have to enforce a systematic education on the method of a practical breast feeding enlarged by a medical personnel and professional early enough as the information provision on breast feeding enables one to increase knowledge and attitude on it, besides it has relations with their practical will.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.83-88
• /
• 2016

In this study, previously reported surplus solar energy-related study result and current status of fan coil unit (FCU) for cooling and heating installed in the current sites were briefly examined and then a method to determine the number of FCUs required to recover surplus solar energy was schematically proposed to provide basic data for researchers and technical engineers in this field. The maximum, mean, and minimum outside temperatures during the experiment period were about $28.2^{\circ}C$, $4.4^{\circ}C$, and $-11.5^{\circ}C$, respectively. The horizontal surface solar radiation level outside the greenhouse was in a range of $0.8-20.5MJ{\cdot}m^{-2}$ and mean and total solar radiation were $10.8MJ{\cdot}m^{-2}$ and $1,187.5MJ{\cdot}m^{-2}$. The mean temperature and relative humidity in the greenhouse during the daytime were in a range of 18.8-45.5 and 53.5-77.5%. The total surplus solar energy recovered from the greenhouse during the experiment period was approximately 6,613.4MJ, which could supplement about 6.7% of the total heating energy 98,600.2 MJ. In addition, the number of FCUs installed for heating varies case to case, although similar FCUs are used. Thus, it is necessary to study the installation height, orientation and installation distance as well as the appropriate number of FCUs from the efficient and economical viewpoints. The required numbers of FCUs for surplus solar energy recovery were 8.4-10.9units and 6.1-8.0units based on air mass and circular flow rate that passed through the FCUs. Considering calculation methods and the risks such as efficiency and use environments of FCUs, it was found that about nine units (one unit per $24m^3$ approximately) needed to be installed. The required number of FCUs for surplus solar energy recovery was around one unit per $24m^3$ approximately.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.4
• /
• pp.360-364
• /
• 1990

To testy time division scheme, we performed some experiments in a circular water tank(13m in diameter and 1m deep). A result of that is shown in figure 4. The 2-dimensional position of the pinger was calculated by the method of hyperbolic line of position calculation. The resolution of the time difference on the base line is 2.5cm. In experiments, the multiple pingers of a single frequency were distinguished and tracked successfully. When the experiment is carried out in the water tank, some multi-path pulses always occur. To delete it, several 10 ms of time delay is inserted onto the program after a group of the normal signals are received. Some normal pulses are not received by the time delay, however there is no problem, practically, for the distinction and the tracking of the pulse. In 2-dimensional positioning, the pinger position can be calculated with three hydrophones. However, if four hydrophones are available, the positioning accuracy will be higher than three hydrophones only by some techniques. Another good feature of the use of four hydrophones is that the positioning of the pinger is capable if a hydrophone fails in receiving them. We also tested this distinguishing method in the field using another type pingers(APPENDIXA).

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.400-425
• /
• 2018

This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.

• Journal of radiological science and technology
• /
• v.36 no.4
• /
• pp.291-297
• /
• 2013

This study is aimed to evaluate the effect of $T_{1/2}$ upon count rates in the analysis of dynamic scan using NaI (Tl) scintillation camera, and suggest a new quality control method with this effects. We producted a point source with $^{99m}TcO_4^-$ of 18.5 to 185 MBq in the 2 mL syringes, and acquired 30 frames of dynamic images with 10 to 60 seconds each using Infinia gamma camera (GE, USA). In the second experiment, 90 frames of dynamic images were acquired from 74 MBq point source by 5 gamma cameras (Infinia 2, Forte 2, Argus 1). There were not significant differences in average count rates of the sources with 18.5 to 92.5 MBq in the analysis of 10 to 60 seconds/frame with 10 seconds interval in the first experiment (p>0.05). But there were significantly low average count rates with the sources over 111 MBq activity at 60 seconds/frame (p<0.01). According to the second analysis results of linear regression by count rates of 5 gamma cameras those were acquired during 90 minutes, counting efficiency of fourth gamma camera was most low as 0.0064%, and gradient and coefficient of variation was high as 0.0042 and 0.229 each. We could not find abnormal fluctuation in $x^2$ test with count rates (p>0.02), and we could find the homogeneity of variance in Levene's F-test among the gamma cameras (p>0.05). At the correlation analysis, there was only correlation between counting efficiency and gradient as significant negative correlation (r=-0.90, p<0.05). Lastly, according to the results of calculation of $T_{1/2}$ error from change of gradient with -0.25% to +0.25%, if $T_{1/2}$ is relatively long, or gradient is high, the error increase relationally. When estimate the value of 4th camera which has highest gradient from the above mentioned result, we could not see $T_{1/2}$ error within 60 minutes at that value. In conclusion, it is necessary for the scintillation gamma camera in medical field to manage hard for the quality of radiation measurement. Especially, we found a tendency that count rate changes over time at this study, and we proved that it can effect $T_{1/2}$. And also, there is need of appropriate phantoms and the method of quality management like this study, because there are not any advice or limitation degrees for domestic medical purpose scintillation camera.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.593-601
• /
• 2017

With the rapid industrial development and national economic advance since 1970, the national income of Korea has sharply increased. As a result, issues regarding city expansion, urban concentration, increase in the number of registered motor vehicles, and increase in traffic have caused transportation issues such as traffic congestion and problems with parking. Especially, enforcement ordinances and rules have been established on installation and management of parking lots to solve problems with parking which are raised as social problems such as conflict with neighbors but the flexible calculation of legal parking space has the limitations because of the diversity and complex functionality of purposes of facilities. Accordingly, this study attempted to supplement such demerit of the parking space demand forecast method based on the legally required number of parking spaces and average unit requirement in the parking space supply. This study estimated the required number of parking spaces by analyzing existing literature, collecting field research data, and analyzing the factors that have an impact on the parking demand. Also, it compared the required number of parking spaces based on the average unit requirement as well as the required number of parking spaces by the forecast model based on the cumulative number of motor vehicles parked. The result was that the required number of parking space based on average unit requirement was less than the cumulative number of motor vehicles parked by 9.99%. Meanwhile, the required number of parking spaces by the forecast model was more than the cumulative number of motor vehicles parked by 4.37%. Therefore, it is believed that the parking space forecast model is more efficient than the others in estimating there quired parking space. The parking space forecast model of this study consider different environmental factors to enable practical parking demand forecast considering the local characteristics and thus supply the parking space in an efficient way.