• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.404-416
• /
• 2006

Purpose : This study was to clarify the changes in mandibular condyle after unilateral mandibular distraction osteogenesis throughout histological changes and expression of matrix metalloproteinase-2 (MMP-2) and tissue inhibitor of matrix metalloproteinase-2 (TIMP-2). Materials & Methods : Intraoral distractors were placed via submandibular incision in 8 dogs. Two unoperated animals served as controls. Distraction was performed five days after osteotomy as a rate of 0.5 mm twice per day for 10 days. Two animals were sacrificed on 7, 14, 28, and 56 days after completion of distraction, respectively. Ipsilateral condyles were harvested and processed for histological and immunohistochemical examinations. Results : The condyle cartilage is separated into four layers: fibrous layer, proliferative layer, hypertrophic layer, and calcified layer. At 7 days and 14 days after distraction, the condylar cartilage showed the decreased thickness of the articular cartilage and reduced cellularity. At 28 days after distraction, there was an increase in cellularity of fibrous, proliferative, and hypertrophic layer. However, it demonstrated reduced cellularity compared to the control. At 56 days of after distraction, the articular cartilage was an almost normal histologic structure. Positive Safranin-O staining, indicative of sulfated proteoglycans, was examined in the condylar cartilge of nonloaded control. At 7 days and 14 days after distraction, the sulfated proteoglycans is almost completely depleted from the noncalcified part of the condylar cartilage. At 28 days after distraction, there was an increase in Safranin-O staining intensity. However, the staining intensity of the experimental condyle was weaker than that of the control. At 56 days of after distraction, the condylar cartilage showed almost normal Safranin-O staining pattern. In control condyle, MMP-2 immunostaining was seen in fibrous, proliferative, and hypertrophic layer of condylar cartilage, however, it demonstrated lack of staining in fibrous and proliferative layer. At 7 days and 14 days after distraction, strong MMP-2 immunoreactivity was seen in the fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 28 days after distraction, MMP-2 immunostaining was seen in the fibrous and hypertrophic layer of condylar cartilage, however, their immunoactivity was reduced. At 56 days after distraction, MMP-2 immunoreactivity showed almost normal immunostaining pattern. In control condyle, TIMP-2 immunostaining was primarily seen in fibrous and hypertrophic layer of condylar cartilage, however, it demonstrated lack of staining in proliferative layer. At 7 days after distraction, very weak TIMP-2 immunoreactivity appeared in fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 14 days after distraction, weak TIMP-2 immunoreactivity was seen in the fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 28 days after distraction, TIMP-2 immunoreactivity was increased in the fibrous and hypertrophic layer of condylar cartilage. At 56 days after completion of distraction, TIMP-2 immunoreactivity showed almost normal immunostaining pattern. Conclusions : The results show that short-term outcome of physiologic distraction osteogenesis may lead to degenerative changes in the condylar cartilage. These alterations in the condylar cartilage may be considered as a pressure-related degeneration of the cartilage tissue. However, the long-term results suggest that the condylar cartilage display repair activity after mandibular distraction osteogenesis.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.57-60
• /
• 2001

In order to extend the life time of building and civil infra-structure, nowadays, patch type fibrous composite materials are widely used. Retrofitted concrete columns and beams gain the stiffness and strength, but they lose toughness and show brittle failure. Usually, the cracks of concrete structures are visible with naked eyes and the status of the structure in the life cycle is estimated with visible inspection. After retrofitting of the structure, crack visibility is blocked by retrofitted composite materials. Therefore, structural monitoring after retrofitting is indispensible and self diagnosis method with optical fiber sensor is very useful. In this paper, We try to detect peel out effect and find the strain difference between main structure and retrofitting patch material when they separate each other.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2001

The ESEM could be used in investigating the fibrous networks developed during handsheet-forming processes with the exception of the stages relating to the actual dispersion of the fibers and the drying of formed sheets. Also the cross-sectional images of swollen fibers were generated with the ESEM but the information given by the images was rarely fresh compared to the CLSM images. The LTSEM was extremely useful in generating images of the microfibrillar structure of a wet fiber with great resolution. However, pretreatment required in the LTSEM chamber was somewhat tedious due to the time consumed in sublimation of ice and sputter coating. For observation of lamellar structure of a hydrated fiber, the LTSEM exhibited greatly detailed structure with high resolution. Finally ESEM and LTSEM should be used in a finite field such as observation of surface morphology in detail.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.237-244
• /
• 2019

This paper suggests novel types of joint mechanisms composed of elastic strings and rigid bodies. All of the human hinge joints have the articular capsule and a pair of collateral ligaments. These fibrous tissues make the joint compliant and stable. The proposed mechanism closely imitates the human hinge joint structure by using the concept of tensegrity. The resultant mechanism has several characteristics shown commonly from both the tensegrity structure and the human joint such as compliance, stability, lightweight, and non-contact between rigid bodies. In addition, the role and feature of the human hinge joints vary according to the origins of a pair of collateral ligaments. Likewise, the locations of two strings corresponding to a pair of collateral ligaments produce different function and motion of the proposed mechanism. It would be one of the advantages obtained from the proposed mechanism. How to make a joint mechanism with different features is also suggested in this paper.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.507-515
• /
• 2014

Asbestos is designated as carcinogen minerals. Detoxification of asbestos is being conducted by physical and chemical treatments that lead the formation of non-fibrous mineral particles or phase transitions. Major researches have been performed on mineralogical properties of asbestos and possibilities of detoxification in Korea. More specific studies are needed to prove the form and crystal structure changes during the detoxification of asbestos via heat treatment. Therefore, we studied thermal effects on mineralogical characteristics of chrysotile and asbestiform tremolite using electron microscopy investigation. Electron microscopy investigation showed chrysotile fibers were fully transformed into rod-shaped forsterite at $850^{\circ}C$ in 2 hours, and asbestiform tremolite fibers were converted into non-fibrous diopside at $1050^{\circ}C$ in 2 hours. Fibrous asbestos were converted into rod-shaped minerals, which are non-asbestiform. However, compositions of both minerals were not changed before and after heat treatment. These results indicate that thermal treatment of asbestos completely broke down asbestos structure due to dehydroxylation and recrystallization. Thus, electron microscopy investigation can provide the useful information of shapes, crystal structure, and chemistries of the asbestos for the detoxification.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.10
• /
• pp.1419-1426
• /
• 2015

This study aimed to investigate the effect of the ratio of non-fibrous carbohydrates to neutral detergent fibre (NFC/NDF) and undegraded dietary protein (UDP) on rumen fermentation and nitrogen metabolism in lambs. Four $Dorper{\times}thin-tailed$ Han crossbred lambs, averaging $62.3{\pm}1.9kg$ of body weight and 10 mo of age, were randomly assigned to four dietary treatments of combinations of two levels of NFC/NDF (1.0 and 1.7) and two levels of UDP (35% and 50% of crude protein [CP]). Duodenal nutrient flows were measured with dual markers of Yb and Co, and microbial N (MN) synthesis was estimated using $^{15}N$. High UDP decreased organic matter (OM) intake (p = 0.002) and CP intake (p = 0.005). Ruminal pH (p<0.001), ammonia nitrogen ($NH_3-N$; p = 0.008), and total volatile fatty acids (p<0.001) were affected by dietary NFC/NDF. The ruminal concentration of $NH_3-N$ was also affected by UDP (p<0.001). The duodenal flow of total MN (p = 0.007) was greater for lambs fed the high NFC/NDF diet. The amount of metabolisable N increased with increasing dietary NFC:NDF (p = 0.02) or UDP (p = 0.04). In conclusion, the diets with high NFC/NDF (1.7) and UDP (50% of CP) improved metabolisable N supply to lambs.

• Journal of the Korean Chemical Society
• /
• v.58 no.5
• /
• pp.456-462
• /
• 2014

Binary-doped conducting chiral polyaniline (PAni) was synthesized by electrochemical polymerization of aniline at low-temperature ($0^{\circ}C$) and room-temperature (RT) conditions. (+)-Camphorsulfonic acid (CSA) and hydrochloric acid (HCl) were used as a binary dopant. Formation of the binary-doped PAni rather than a mixture of the corresponding single-doped PAni was confirmed by cyclic voltammogram, FT-IR and circular dichroism spectra. The temperature influenced the electrochemical behavior and doping level, thus determining the crystallinity and morphology of the PAni. However, among other results, morphology of the PAni is found to be most strongly depends on the polymerization temperature. With increased temperature from the initial state to RT, morphology of the PAni changed from fibrous to short-fibrous structure. The sheet resistance of the PAni films on an ITO was measured by using four-point probe dc method.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.2
• /
• pp.124-128
• /
• 1998

From Feb. 1996 to Feb. 1997. among sixty-four patients of anterior cruciate ligament(ACL) reconstruction using multi-stranded hamstring tendon and EndoButton fixation, twenty-five patients of volunteer, 15 men and 10 women, from 16 to 50 years of age(mean 27.6 years) underwent arthroscopic evaluation. Arthroscopic evaluation was routinely performed one year after surgery along with an examination of stability. The purpose of this study was to arthroscopically evaluate the morphological changes that occurred in hamstring tendon autograft one year after ACL reconstruction. Both of the tendon graft and the adjacent fibrous tissues were observed for gross appearance and physical properties with probing and response to passive anterior translation. Biopsy samples were taken from the surrounding fibrous tissue and the tendon graft. Grossly, we found a well-defined ligamentous structure with good tension tested with a probe. A common finding was that the reconstructed ligaments were embedded in a layer of the synovium, and blood vessels could be seen on the anterior surface of the ligament. The biopsy tissue was placed in formalin solution and subjected to histological preparation by hematoxylin and eosin staining method. The hamstring tendon graft appeared histologically normal under light microscopic finding. There were a few vessels located between existing collagen bundles, and the vessels had an orderly pattern. The surrounding fibrous tissue envelope was covered with synovium. We pleased with preliminary findings in our evaluation.

• Korean Journal of Materials Research
• /
• v.27 no.3
• /
• pp.132-136
• /
• 2017

We synthesized potassium hexatitanate, ($K_2Ti_6O_{13}$, PT6), with a non-fibrous shape, by acid leaching and subsequent thermal treatment of potassium tetratitanate ($K_2Ti_4O_9$, PT4), with layered crystal structure. By controlling nucleation and growth of PT4 crystals, we obtained splinter-type crystals of PT6 with increased width and reduced thickness. The optimal holding temperature for the layered PT4 was found to be ${\sim}920^{\circ}C$. The length and width of the PT4 crystals were increased when the nucleation and growth time were increased. After a proton exchange reaction using aqueous 0.3 M HCl solution, and subsequent heat treatment at $850^{\circ}C$, the PT4 crystal transformed into splinter-type PT6 crystals. The frictional characteristics of the friction materials show that as the particle size of PT6 increases, the coefficient of friction (COF) and wear amounts of both the friction materials and counter disc increase.

• Composites Research
• /
• v.12 no.2
• /
• pp.70-81
• /
• 1999

Resin transfer molding(RTM) as a composite manufacturing process is currently of great interest in the aerospace industry requiring high performance composite parts. In this study, an analysis of mold filling in the RTM process was carried out by numerical simulation using finite element/control volume technique. Experimental work for the visualization of resin flow through fibrous preform was also conducted in order to quantitatively measure the permeabilities of the fiber mats and to evaluate the validity of the developed numerical code. The different types of fiber mats and silicon oils were selected as reinforcements and resin materials, respectively. The effects of fibrous preform structure, mold geometry, and preplaced insert on the flow front patterns during mold filling were examined by integrating the model predictions and experimental results. The flow fronts predicted by numerical simulation were in good agreement with those observed experimentally. However, according to the regions of the mold, some deviations between predicted and observed flow fronts could be found because of non-uniform fiber volume fraction. Weldline locations for the resin flow through round insert preplaced in the mold could be qualitatively deduced based on predicted flow fronts.