• 한국염색가공학회지
• /
• 제6권1호
• /
• pp.62-70
• /
• 1994

Silk fibroin was dissolved in 9.3 M LiBr aqueous solution at 4$0^{\circ}C$ for 1 hour. The dissolved silk fibroin was regenerated by casting the dialyzed solution into the membrane. The freshly prepared silk fibroin membrane was soluble in water and was. mainly consisted of random coil conformation. By the treatments in saturated water vapor at 3$0^{\circ}C$ and in 75% ethanolic aqueous solution (V/V), the insoluble membranes were obtained and the structure and morphology of those were investigated for the structure by means of X-ray diffraction analysis, infrared spectroscopy, thermal analysis. Rheovibron and scanning electron micrograph. Silk II type crystals were obtained by treating amorphous silk fibroin membrane in the random coil conformtion with 75% ethanol solution(V/V). Crystallization to silk II type crystals occured even after a few minutes, and a large number of silk II type crystals were formed after 30 mins. On the other and, the membrane treated in saturated water vapor was composed of the mixtures of silk I and silk II type crystals. A large number of silk I and silk II type crystals were formed after 24 hours. The micro brownian motion in the amorphous regions of silk fibroin membrane started at about 175~185$^{\circ}C$. $\alpha$ dispersion appeared at about 20$0^{\circ}C$ in the amorphous membrane, and at about 22$0^{\circ}C$ in the crystalline membrane. The crystallization of random coil conformation to silkII type crystals occured at about 215$^{\circ}C$. The surface, bottom and cross-section of the membranes were observed by scanning electrom microscope. Fine forms alike spherulites appeared at the surface of crystalline membrane.

• 폴리머
• /
• 제34권4호
• /
• pp.321-325
• /
• 2010

피브로인은 실크섬유에서 대량으로 얻어지는 생물고분자이며 수술 봉합사로 장기간 사용되어 생체적합성이 확인되었다. 따라서, 본 연구에서는 생체재료로 사용할 수 있는 피브로인 미립구를 제조하였다. 데칸과 혼합유화제로 이루어진 연속상에 재생 피브로인 액적을 분산시킨 후 건조시켜 형성된 미립구를 회수하여 에탄올 등으로 세척 건조 후 수득하였다. 안정한 유중수형(W/O) 에멀션을 600 rpm으로 교반하는 조건하에서 구형의 피브로인 미립구를 얻 을 수 있었다. 주사전자현미경 사진을 통하여 상압 및 감압하에서 건조된 미립구의 수평균 직경은 각각 21.6 및 8.5 ${\mu}m$로 확인되었다. 토모그래피로 미립구는 내부구조가 채워져 있으나 크기에 따라 중공미립구임을 확인하였고 중탄 산나트륨을 도입하여 중공미립구도 제조하였다.

• 폴리머
• /
• 제38권1호
• /
• pp.98-102
• /
• 2014

실크 피브로인은 뛰어난 생체적합성 및 생분해성으로 인해 의료용 천연고분자소재로 각광받고 있으며 다양한 형태로 제조되어 이용되고 있다. 전기분사법은 고분자 용액에 고전압을 적용하여 미세입자를 제조하는 방법으로 진행과정이 간단하고 첨가제를 필요로 하지 않는다는 장점을 지닌다. 본 연구에서는 실크 피브로인 다공성 미세입자를 제조하기 위하여 폴리(에틸렌 글리콜)(PEG)을 첨가한 후 전기분사를 실시하였다. PEG를 첨가함으로써 분사원액의 전도도는 감소하였고 점도는 증가하였다. 제조된 미세입자의 크기는 PEG 첨가에 따라 감소하였는데 이는 분사용액의 전도도 및 점도보다는 피브로인과 PEG간의 상분리에 의한 효과인 것으로 보인다. 제조된 실크 피브로인 미세입자를 물에 침지한 결과 PEG가 제거되었으며 최종적으로 실크 피브로인 다공성 입자를 제조할 수 있었다. 제조된 다공성 실크 피브로인 미세입자는 약물전달체 및 조직공학용 세포전달체로 이용가능성이 높을 것으로 기대된다.

• KSBB Journal
• /
• 제29권5호
• /
• pp.328-335
• /
• 2014

Vehicle toxicity is one of the main obstacles for intracellular delivery of bioactive compounds. Silk fibroin is a natural polymer proven to have high biocompatibility since being used as suture material. In this report, fibroin microspheres were prepared without any chemical modification or cross-linking not to affect its biocompatibility. The microspheres were taken up by more than 90% of 3T3 cells. Cellular uptake continued after medium replenishment with a different-colored fluorescent microsphere, suggesting that simultaneous ingestion and exocytosis occurred. Cellular uptake of fibroin microspheres did not affect cell viability. Intracellular trafficking of the microspheres using lysosome-specific fluorescent dye revealed that fibroin microspheres were localized both in the cytoplasm and in the lysosome. Accordingly, fibroin microspheres can be a potential vehicle for intracytoplasmic delivery of large cargos, such as mixtures of proteins, nutrients or artificial organelles.

• 한국식품영양과학회:학술대회논문집
• /
• 한국식품영양과학회 2004년도 Annual Meeting and International Symposium
• /
• pp.185-197
• /
• 2004

Type 2 diabetes is characterized by hyperglycemia and hyperinsulinemia, features of insulin resistance. In vivo treatment of ob/ob mice with hydrolyzed fibroin reverses these pathological attributes (6). To explore the mechanism underlying this effect, we have used the 3T3-Ll adipocytes as a cell type which would represent the periphery, in vivo. Exposure of 3T3-Ll adipocytes to chronic insulin leads to the a 50% loss of insulin-stimulated glucose uptake. Chronic exposure to fibroin blocked, in part, the response to chronic insulin but also increased the sensitivity of control cells to the acute action of insulin. The later effect was most robust at physiological concentrations of insulin. Fibroin did not prevent the insulin-induced down-regulation of the insulin receptor or the tyrosine kinase activity associated with the receptor. Further, fibroin had no affect on the loss in activity of the insulin-sensitive down-stream kinase, Akt. Interestingly, fibroin accelerated glucose metabolism and glycogen turnover independent of insulin action. In addition, fibroin up-regulated GLUT1 which increased its expression at the cell surface and caused the redistribution of GLUT4 to the plasma membrane. Together, these later effects would lead to an improvement in hyperglycemia in vivo which would in turn reduce the need for insulin.

• 한국잠사곤충학회지
• /
• 제39권2호
• /
• pp.197-202
• /
• 1997

To hydrolyze silk fibroin was treated with NaOH solution on various concentrations and times. And it was examined that the addition effects of NaHSO3 solution on the solubility and colouring of silk fibroin. As obtained results are as follows; The more increasement of concentration and time of NaOH treatment, the more increasement of solubility but solubility was slight above 3% concentration of NaOH. Fibroin yield was decreased above 3% concentration. This was due to formation of peptide or amino acids below molecular weight 3,000. Most of molecular weight distribution came out to be under 3,000 in 2% concentration and 4hrs of NaOH treatment. The more increasement of adding concentration and 4hrs of NaOH treatment. The more increasement of adding concentration of NaHSO3, the more reduction of solubility but white index of powder increased. In the results of FT-IR spectras of silk fibroin powder obtained by various concentrations of NaHSO3 treatment, the absorbent peak at 3,400 cm-1 which was considered as -CH=N- (azomethine) was disappeared by the more addition of NaHSO3. It showed that absorbent peak of $\beta$-fibroin moved into low temperature region and transferred to $\alpha$- and random coil structure through the DSC experiment. In the results of amino acid analysis, alkali hydrolysis reduced the oxy amino contents acid like serine and tyrosine, but increased the glycine content by the more addition of NaHSO3.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제2권1호
• /
• pp.7-13
• /
• 2001

Enzymatic hydrolysis of different forms of silk fibroin (soluble, gel and insoluble forms) by industrial and commercial enzyme preparations to obtain aqueous and powdered silk fibroin in relatively mild conditions was investigated. A mono-enzymatic hydrolysate systems were tested for hydrolysis of water-soluble form of fibroin as most productive form of protein substrate. Insoluble forms of substrate usually were hydrolyzed less effective. In some cases from soluble fibroin substrate gel was formed during hydrolysis process. This hindered intermixing and decreased rates of hydrolysis. Insoluble sediments were formed in enzymatic hydrolysates in other cases. These sediments and also sediment after chemical hydrolysis were purified and tested on amino acids content for comparison. Sediments formation in these conditions are considered as pure tyrosine isolation method. Obtained hydrolysates were characterized by gel-chromatography analysis and other standard biochemical methods. Possibility of application of enzymatic hydrolysis for preparation of silk fibroin hydrolysates is discussed.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.198-202
• /
• 2002

Degummed silk from Bombyx mori was dissolved in 9.3M lithium bromide solution. The regenerated silk fibroin films were completely ${\alpha}$-randomcoil type as shown by x-ray diffraction and infrared spectroscopy. The structural changes in silk fibroin induced by immersion into methanol and dilute hydrochloric acid and its photo-yellowing effect was studied. The changes of crystallinity were measured by infrared spectrometer. Yellowness index caused by ultraviolet irradiation were observed as a function of the structural change on silk fibroin. On treatment with methanol, ${\alpha}$-randomcoil silk film is converted to the ${\beta}$-form structure. After the treatment of hydrochloric acid on ${\beta}$-form structure in silk induced by immersion into methanol, ${\beta}$-form in silk fibroin is partially decreased. Crystallization owing to ${\beta}$-form transition reduced the initial yellowness index by ultraviolet irradiation. A little ${\beta}$-form structure in silk fibroin increased the initial yellowness in comparison with more ${\beta}$-form structure.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제21권1호
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제1권1호
• /
• pp.59-64
• /
• 2000

The preparation of PVA/Chitosan/Fibroin (PCF)-blended sponge sheets and wound healing effects of these sheets in rats were investigated. We excised the skin off rat, including the dermis, approximately 2${\times}$2 cm in size. The wound was coveted with PCF-blended spongy sheets. The spongy sheets absorbed the exudate, and gained flexibility and softness. Histopathological inspection of the wound 12 days later showed the increase of a vascular ingrowth and the absence of inflammatory cells. Regeneration of the skin around the wound was faster than that of the control. We also tested wound healing effects of PVA, Chitosan and Fibroini alone of in various combinations. Wound healing was accelerated in the order of PVA/chitosan/Fibroin (PCF)-blended sponge>Chitosan/Fibroin (CF)-blended sponge$\geq$Fibroin (F) sponge>PVA/Chitosan-blended sponge (PC)>Chitosan (C) sponge.