• Composites Research
• /
• 제24권6호
• /
• pp.31-36
• /
• 2011

성형조건에 따른 GMT-Sheet를 관찰하여, 성형품 표면의 섬유돌출을 조사했다. 섬유돌출은 모재의 수축에 의해서 성형품 표면에 생성되는 불량현상의 하나이다. 즉, 섬유돌출은 성형온도에서 상온까지 성형품이 냉각될 때 모재와 유리섬유의 수축차에 의해 발생하는 표면불량 현상이다. 성형품 표면의 섬유돌출 높이는 보압 냉각과정에서 성형압력이 클수록 작게 나타남을 알 수 있다. 성형품 표면의 섬유돌출 높이는 성형압력의 영향이 지배적임을 알 수 있다. 성형압력을 고려하여, 성형품의 표면요철 생성과정과 섬유돌출 높이 변화를 규명했다. 그리고 피복층은 표면불량 현상을 억제하는 효과가 있고, 표면으로부터 섬유돌출이나 크랙이 보이지 않았다. 피복층은 표면거칠기를 단일재료인 폴리프로필렌 정도까지 개선하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.103-103
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. From the result of comparative experiment and questionnaire, the laser contact angle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1327-1330
• /
• 2008

A novel fiber optic solution is provided to efficiently mix visible colors. Full color synthesis was achieved utilizing a novel $3{\times}1$ hard polymer clad fiber (HPCF) coupler along with red, green and blue (RGB) light emitting diode (LED) primaries. Varying the intensities of RGB LEDs that are coupled to three input ports, the device rendered a full color with an ultra wide CIE color gamut. Potential applications in pica-projection displays and LED backlights will be discussed.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.

• Composites Research
• /
• 제23권5호
• /
• pp.30-38
• /
• 2010

성형조건에 따른 GMT-Sheet를 관찰하여, 성형품 표면의 불량원인을 조사했다. 현미경 관찰 결과, GMT-Sheet 성형품의 표면에서 구정, 섬유돌출, 크랙, 섬유노출, 마이크로 웰드라인, 핀홀, 여파굴곡곡선 등의 결함을 발견했다. 이 결함들은 요철의 발생원인이고, 표면 광택에 영향을 주는 현상이다. 그리고 표면거칠기에 영향을 주는 요철의 가장 주요한 발생원인은 보압 냉각 과정에서 발생하는 모재의 수축이었다. 성형 시의 보압하중이 높을수록 GMT-Sheet 성형품 표면은 좋아졌다. 또한 서냉실험에서는 탈형온도가 낮을수록 성형품의 표면이 좋아졌다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.385-386
• /
• 2009

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.111-111
• /
• 2003

In our experiments using a new apparatus, the drape formation process was found to consist of three stages, seeds generation, their development and the final stabilizing stages. A new parameter R evaluating the shape of the drape was defined in terms of the vertical projection of the drape. Both drape coefficient and R-parameter are expected to be useful for analyzing the formation process of the fabric drape quantitatively.

• Coupled systems mechanics
• /
• 제12권6호
• /
• pp.503-517
• /
• 2023

Standard Digital Volume Correlation (DVC) approaches are based on pattern matching between two reconstructed volumes acquired at different stages. Such frameworks are limited by the number of scans (due to acquisition duration), and time-dependent phenomena can generally not be captured. Projection-based Digital Volume Correlation (P-DVC) measures displacement fields from series of 2D radiographs acquired at different angles and loadings, thus resulting in richer temporal sampling (compared to standard DVC). The sought displacement field is decomposed over a basis of separated variables, namely, temporal and spatial modes. This study utilizes an alternative route in which spatial modes are con-structed via scan-wise DVC, and thus only the temporal amplitudes are sought via P-DVC. This meth-od is applied to a glass fiber mat reinforced polymer specimen containing a machined notch, subjected to in-situ cyclic tension, and imaged via X-Ray Computed Tomography. Different temporal interpolations are exploited. It is shown that utilizing only one DVC displacement field (as spatial mode) was sufficient to properly capture the complex kinematics up to specimen failure.

• Current Optics and Photonics
• /
• 제4권3호
• /
• pp.221-228
• /
• 2020

We developed an all-fiber RGB laser light source module for application in an automobile head-up display. It is based on laser diodes and an optical fiber combiner that substantially enhances the flexibility of configuration and stability against harsh working conditions for automobiles. We coupled 13 laser diodes with optical fibers and merged them into a single output with a beam combiner device. Red (R), green (G), and blue (B) laser sources were employed to produce primary colors that were mixed into a white light output. An optical output power of approximately 1.5 W was achieved, and the color balance of the output lights was assessed based on the CIE 1931 color space. The optical output power was shown to be stable for over 160 h within an optical fluctuation of less than 0.27%.

• 대한치과의사협회지
• /
• 제19권7호통권146호
• /
• pp.625-634
• /
• 1981

A Scanning Electron Microscopic Study of the root surface changes was carried out in advanced periodontal disease. The results obtained were summerized as follow; 1. The root surface of cementoenamel junction of healthy root showed smooth surface, while the root surface of diseased state showed covering of deposits which regareded as a course of calcification. 2. At the mid-portion of the root, the regular cemental projection were observed on the healthy root surface and on the root surface of diseased state, cemental projection showed relatively irregular pattern. 3. On the root surface which consist of wall of periodontal pocket, there were various deposits which could be considered as subgingival calculus, bacterial plaque and epithelial attachment remnant. 4. The bottom area of the pathologic pocket, tearing altered collagen fibers were seen on the root surface. 5. At the apical portion of root surface, calcified fibers ran parallel to the root surface in healthy tooth and the fiber bundles of periodontal ligament were seen in the diseased state.