• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.468-473
• /
• 2017

We determined the feasibility of a fishing camera system using an optical fiber as the fishing line by testing a power-over-fiber (POF) module and multimode optical fiber. Operation of the remote camera module (RCM) without the battery was preferred because the removal of the charging or battery replacement section enabled a waterproof single-body type design. The average efficiency of the photovoltaic power converter (PPC) in the tested POF module was 32.6% at 820 nm, and thus, a high-power laser of at least 1.27 W was required for operating the developed RCM with an electrical dissipation of 413 mW. Because the optical fiber was wound on a fishing reel, composite loss composed of bending and tensile loss occurred. To mitigate the composite loss, we employed a simple holder that showed an improvement in the composite loss of 0.38 dB to 0.8 dB, which was considerably better than the losses without the holder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.96-99
• /
• 2005

Fiber optic connector, ferrule, is a device to connect and align fiber optics cable on fiber-optic communication system. In this paper, Structural analysis was performed to analyze bed and frame structure of co-axial grinding machine. Deformation and modal analysis for natural frequency was performed using ANSYS Designspace program to analyze structural characteristics. New improved model of bed and frame structure was proposed based on initial basic model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.559-560
• /
• 2006

Fiber optic connector, ferrule, is a device to connect and align fiber optics cable on fiber-optic communication system. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that structure of co-axial ferrule grinding system is optimized. In this paper, Structural analysis was performed to analyze bed and frame structure of co-axial grinding machine. Deformation and modal analysis for natural frequency was performed using ANSYS design space program to analyze structural characteristics. New improved model of bed and frame structure was proposed based on initial basic model. Therefore, we estimated the structural characteristics precision co-axial grinding machining system.

• Current Optics and Photonics
• /
• 제8권5호
• /
• pp.508-514
• /
• 2024

This paper presents a deep learning-based weight sensor, using optical speckle patterns of multimode fiber, designed for real-time intrusion detection. The weight sensor has been trained to identify 11 distinct speckle patterns, ranging in weight from 0.0 kg to 2.0 kg, with an interval of 200 g between each pattern. The estimation for untrained weights is based on the generalization capability of deep learning. This results in an average weight error of 243.8 g. Although this margin of error precludes accurate weight measurement, the system's ability to detect abrupt weight changes makes it a suitable choice for intrusion detection applications. The weight sensor is integrated with the Google Teachable Machine, and real-time intrusion notifications are facilitated by the ThingSpeak^TM cloud platform, an open-source Internet of Things (IoT) application developed by MathWorks.

• 한국전자파학회논문지
• /
• 제28권1호
• /
• pp.25-32
• /
• 2017

본 논문에서는 플루오린화 수소산(hydrofluoric acid)과 표면 장력을 이용한 손실이 낮은 광섬유형 방향성 결합기 제작 방법을 제안한다. 제안한 방향성 결합기 제작 방법은 기존에 일반적으로 이용하던 열원을 이용한 제작 방법과는 다르게 다양한 장비들이 요구되지 않으며, 마멸을 이용한 방법보다 손실이 낮으며, 제작 과정이 매우 쉽다. 또한, 제작된 결과물은 테이퍼드(tapered) 형태의 아디아바틱(adiabatic)한 구조로 인해 광통신에서 널리 이용되는 C-band 영역에서 파장 의존성이 낮아 광통신에서 유망한 역할을 맡을 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.244-246
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. We are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• 한국광학회지
• /
• 제14권6호
• /
• pp.600-605
• /
• 2003

Radio-over-Fiber(RoF) 시스템에서 직접 광스위칭 CDMA(Direct Optical Switching CDMA : DOS-CDMA) 기법을 이용하여 기존 이동통신에서 연구되어왔던 수 ㎓ 대역보다 주파수가 훨씬 높은 40 ㎓ 대역의 MMW (millimeter wave)를 반송파로 사용한 차세대 이동통신을 위한 MMW DOS-CDMA 시스템 연구를 실험적으로 수행했다. 부호 분할 다중화에 사용된 직교 부호(orthogonal codes)는 단극성(unipolar) 형태의 상호상관이 2이하(crosscorrelation$\leq$2)인 부호열을 선택했으며, 부호 길이(code length)는 16 chips, 칩율(chip rate)은 2.5 Gchip/sec 였다. 광원은 10 ㎓ 광섬유 링 레이저를 유리고조모드 잠김시켜 진폭 균등화한 40 ㎓ 의 안정된 레이저 펄스를 발생시켜 사용하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.71-72
• /
• 2008

We review and report our analytical results in the technology front of optical industry in Japan as optical $recording^{1)}$, semiconductor $stepper^{2)}$, fiber communication, digital $camera^{4)}$ and $OCT^{5)}$ which are contributing to the improvement of people's higher quality of life and to the industrial economical growth from the aspects of the University, Industry and Government collaborations including international comparison to enhance the progress of sustainable global photonic innovation eco-systems. In the following part, some statistics of remarkable economical growth in east Asia and the global warming issue will be mentioned.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.156-161
• /
• 2024

Recently, a new kind of optical multiplexing called optical-receiver-mode (ORM)-division multiplexing (ORMDM) has been proposed, in which an optical channel is a linear sum of ORM subchannels modulated independently. Using coherent-optical (CO) techniques, it has been reported that COORMDM communication systems can have very high spectral efficiencies (SEs). To estimate the SEs of CO-ORMDM communication systems, we introduce a new method of crosstalk analysis. Using this method, we can allocate quadrature-amplitude-modulation (QAM) codes and QAM step sizes unevenly over ORM subchannels to obtain higher SEs. With 50 Gaussian ORMs, we obtain a SE of up to 15.29 bit s^-1 Hz^-1.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.233-240
• /
• 2018

We proposed a two-mode fiber (TMF) design that can effectively reduce the mode overlap between $LP_{01}$ and $LP_{11}$ modes by using a W-shaped index profile core structure, which is a primary concern in uncoupled mode division multiplexing (MDM). TMF has a three-layered core structure; central circular core, inner cladding, and outer ring core. We confirmed that in an optimal structure the $LP_{01}$ mode was highly confined to the central core while the $LP_{11}$ mode was guided along the outer ring core to result in a minimum overlap integral. We used a full-vectorial finite element method to estimate effective index, differential group delay (DGD), confinement loss, chromatic dispersion, and mode overlap controlling the parameters of the W-shaped structure. The optimized W-profile fiber provided optical characteristics within the ITU-T recommended standards over the entire C+L band.