• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.64-71
• /
• 2006

We developed a fiber-optic temperature sensor system, with 10 fiber Bragg gratings, for abnormal high-temperature monitoring in power systems. We used Gaussian line-fitting algorithm to compensate the spectrum distortion in the wavelength-scanned Farby-Perot filter demodulation scheme. Compared with highest-peak-detection method, the proposed algorithm substantially reduced measurement errors. The overall measurement error was less than 1[%] compared with the reference thermocouple and the linearity error was 0.37[%].

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.246.1-246.1
• /
• 2007

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.192-193
• /
• 2001

높은 파장 선택도를 가지고 광신호를 제어하는 광섬유격자는 단주기 격자, 장주기 격자, 첩 격자 등이 있는데 이러한 격자의 제작 기술은 여러 응용분야에서 활용도 높은 소자를 제작하는 데 이용되어져 왔다. 본 논문에서는, 주어진 반사 파장 내에 매우 좁은 선폭의 여러 투과 스펙트럼 밴드를 가지며 그 응용성이 다양한 격자 제작을 목표로 이미 수행되어진 위상천이 격자의 시뮬레이션[1]을 토대로 $\pi$위상천이 격자를 제작하였다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.172-173
• /
• 2001

다중 광접속 방법 중 CDMA는 많은 수의 주소(개별 사용자를 위한 채널)를 제공하고 광 패킷 전송 방법에 있어서는 패킷들의 충돌을 피하기 위한 복잡한 장치를 필요로 하지 않는다는 장점을 가지고 있다. LED와 같은 Incoherent 광원을 이용하는 광 CDMA를 위한 여러 가지 광 코드와 암호화 방식이 제안되어 왔으며, 파장/시간 이차원 광 코드를 이용하는 방식은 AWG mux/demux 또는 AWG 라우터를 이용하여 광 코드가 용이하게 구현될 수 있음이 보고된 바 있다. (중략)

• Journal of the Optical Society of Korea
• /
• v.9 no.3
• /
• pp.95-98
• /
• 2005

We propose a two-dimensional temporal/wavelength optical code division multiple access (OCDMA) encoder/decoder, which has an array of superstructured fiber Bragg gratings (SSFBGs). SSFBGs in an encoder/decoder have different wavelengths from each other and can be coded with the same OCDMA code or not. Simulation was performed to analyze the feasibility of the scheme.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.451-460
• /
• 2003

In this paper, high speed fiber optic sensor weigh-in motion (WIM) system is proposed. Bragg gratings which have several advantages such as good reproducibility and good multiplicity compare to other optical fiber sensors are used for the system. Fabry-Perot filter for the signal process, which cannot be used in the high speed measurement because of the limitation in fast operation of PZT, is excluded. A new signal processing system which employs bandwidth filter is proposed and bridge type new sensor package design is also proposed. Design of the mold supporter is modified to round shape and then supporting points do not change. The data from the fiber sensors show identical and linear behavior to the axle weight. The proposed fiber optic WIM system is tested in the laboratory and experimented with actual trucks. The new concept of calibration is introduced and calculated by the experiments. The calibrated weight data show good approximations to real axial weights regardless the velocities of the truck.

• Journal of the Optical Society of Korea
• /
• v.19 no.2
• /
• pp.154-158
• /
• 2015

We experimentally demonstrated a novel wavelength-swept laser using a cascaded Raman gain around 1310 nm. A 1064/1310 wavelength division multiplexing (WDM) coupler and coupled fiber Bragg gratings mirrors at 1064, 1117, 1175, 1240 nm are effectively used to increase the power efficiency in a laser ring cavity with highly non-linear fiber (HNLF) of 2 km. Linear wavelength sweeping is demonstrated with the 100 Hz triangular driving signal to fiber Fabry-Perot tunable filter (FFP-TF) around the 1310 nm region. The measured sweeping range and output power were 27 nm and 2.1 mW, respectively, which are suitable for optical coherence tomography (OCT) imaging.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.306-310
• /
• 2021

A 200-W continuous-wave thulium-doped all-fiber laser at 2050 nm was developed with a master oscillator power amplifier configuration. For the master oscillator, a single-mode thulium-doped fiber laser was built with fiber Bragg gratings. The operating power of the oscillator was 10.1 W at a pump power of 20.9 W, and the slope efficiency was measured to be 53.0%. All emitted wavelengths of the oscillator were located between 2049.2 nm and 2049.9 nm, and no other peaks in different wavelength ranges were observed. The maximum output power of the final amplified beam was 204.6 W at a pump power of 350.4 W. The slope efficiency of the amplifier was measured to be 58.4%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.161-166
• /
• 2016

We studied the effect of $Co^{60}$ gamma-radiation on the FBGs by a variation of grating the fabrication parameters. The FBGs were fabricated in a different UV KrF laser intensity using the same boron co-doped photo-sensitive fiber and exposed to gamma-radiation up to a dose of 33.8 kGy. According to the experimental data and analysis results, We confirmed that the laser intensity for grating inscription has a highly effect on the radiation sensitivity of the FBGs and the radiation-induced Bragg wavelength shift by the change of laser process condition showed a difference more than about 30 %.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.70-77
• /
• 1999

A new method for fabricating long fiber Bragg gratings(FBGs) using uniform phase mask is proposed. The proposed method is characterized by forming a number of subgratings sequentially in series and varying linearly the effective refractive index of each subgrating. The reflectivity of a 200mm long uniform FBG developed fabricated by the method is about 95%. Also, the bandwidth and dispersion slope of a 250mm long linear-chirped FBG developed here are ∼0.5nm and ∼4.965ps/nm respectively.