리튬금속을 사용하는 리튬이차전지는 사용이 간편하고 측정전극의 고유특성을 분석할 수 있는 장점이 있는 반면에 방전후 충전 시 리튬금속 전극에 리튬금속 수지상이 생성되고 심지어는 성장된 수지상에 의해 내부단락을 초래한다. 이러한 단락현상은 분리막의 두께와 밀접한 관계가 있다. 수지상에 의한 내부단락을 방지하기 위하여 두께가 각각 다른 4종류의 분리막을 사용하여 전기화학적 특성을 분석하였다. 다공성 유리섬유 부직포(glass microfiber filter) 분리막은 두께가 $300{\mu}m$ 로써 내부단락을 효과적으로 방지 할 수 있으며 AC 임피던스 값도 낮아서 유망한 분리막으로 확인하였다. 분리막의 두께가 $50{\mu}m$ 이상인 경우 내부단락 현상이 일어나지 않았으며, 0.2 C율의 싸이클 특성도 양호하였다. Signature 율 특성은 다공성 유리섬유 부직포를 사용한 경우 5 C의 고율에서 용량 유지율은 0.1 C에 비교하여 99%의 우수한 특성을 나타내는 것을 확인하였다.
BACKGROUND: This study focused on the contents of flavonoid compounds in vegetables. Generally vegetables have contributed to a healthy diet, arisen from contains a large amount of fiber and functional ingredients. And flavonoid compounds are one of major functional components in the vegetables. currently research of flavonoid contents does not enough, specially in the part of homegrown vegetable. METHODS AND RESULTS: Vegetable samples were purchased in domestic market. Sample extraction by methanol, distilled water, and formic acid based solvent. Also same solvent used for mobile phase in UPLC. Eleven types of flavonoid compounds were analyzed with same kind of external standard and one kind of internal standard (galangin) for quantification. Standard calibration curve presented linearity with the correlation coefficient $R^2$ > 0.98, analysed from 1 to 50 ppm concentration. The quantitative value and multivariate analysis results were derived from the Excel and SIMCA-P11. Overall, onion has largest amount(916.5 mg/100 g) of flavonoid and also other vegetables have has significant amount[Mugwort: 138.8, Galic stem:123.6 mg/100 g etc.] of flavonoid compounds. Edible portion of vegetables per share for simulating by SIMCA-P11, root vegetables has had difference with other vegetables according to distributions and amounts of flavonoid compounds. CONCLUSION: Optionally, the results from this experiment can use to select the material for flavonoid researches. And based on these results, if this experiment will be continuously complemented, and performed, could used in various fields.
소방용 특수방화복의 열보호 성능 평가를 위해 대류와 복사 열원을 이용한 시험방법을 비교하였다. 특히 특수방화복을 구성하는 겉감, 중간층, 안감이 각각 열보호 성능에 미치는 영향을 대류와 복사 열원에 대해 비교하였다. 대류 열원에 대한 열보호 성능시험은 KS K ISO 9151, 복사 열원에 대한 시험은 KS K ISO 6942 그리고 대류와 복사열원을 함께 사용하는 시험은 KS K ISO 17492의 방법에 따라 수행하였다. 같은 입사 열유속 조건($80kW/m^2$)에서 시험했을 때 대류 열원에 비해 복사 열원에 대한 열전달지수($t_{12}$, $t_{24}$) 값이 보다 크게 나왔다. 이는 대류에 비해 복사에 의한 영향이 느리게 나타났음을 의미한다. 대류 열원에 대해서는 안감이 열보호 성능에 가장 크게 영향을 미쳤고 이어서 중간층, 겉감 순서였다. 그러나 복사 열원에 대해서는 안감, 겉감, 중간층 순서로 열보호 성능에 미치는 영향이 컸다. 대류와 복사는 열전달 메카니즘이 근본적으로 다르며, 열원이 달라지면 재질 구성에 따라 열보호 성능 결과가 다르게 나올 수 있다. 따라서 특수방화복의 열보호 성능을 평가하기 위해서는 대류 열원 뿐만 아니라 복사 열원에 대한 시험도 중요함을 확인하였다.
사과식초의 청징효과를 얻고자 한외여과 공정을 수행하여 각 공정변수가 투과플럭스에 미치는 영향과 막저항특성을 검토하고 투과액의 품질을 비교 분석하였다. 한외여과시 압력과 flow rate에 따른 투과 플럭스의 변화는 $1.5\;kgf/cm^2$에서 가장 높게 나타났으며, flow rate의 증가에 따라 비례적으로 증가하였다. 이는 MWCO 10,000을 이용한 실험결과에서도 같은 결과를 보여 본 한외여과 시스템을 이용하여 청징화공정을 수행할 경우에는 막횡단 압력 $1.5\;kgf/cm^2$일 때가 가장 적절한 압력임을 알 수 있었다. 막 분리 후 사과식초의 pH와 적정산도는 무처리와 차이가 없었으며, 탁도는 여과공정을 거친 식초가 여과하지 않은 식초에 비해 현저히 낮아 청징효과가 있음을 알 수 있었다. 색도의 변화에 있어서도 한외여과시 L값은 현저히 높아지고 a값은 큰 차이를 보이지 않고 b값은 더 낮아져 청징효과가 우수함을 알 수 있었다. 막저항은 일정압력에서는 유속의 변화에 따라 큰 차이를 보이지 않았으나 각 저항값들은 압력이 증가할수록 그 값들이 증가하는 경향을 나타내었다. 또한 유속의 증가에 따라서는 모든 저항값들이 감소하였다.
유럽을 중심으로 스틸스터드의 약점으로 지목 받고 있는 열교현상을 억제하기 위한 스터드 개선 연구가 활발히 진행되고 있다. 이 연구는 크게 마감재와 접촉 면적을 줄이는 방법, 웨브면에서 열전달 경로를 늘이는 방법, 열전도성이 낮은 소재를 사용하는 방법, 그리고 스터드를 피복하는 방법으로 구분할 수 있다. 비교적 저층의 주거용 건축물을 대상으로 하는 국외의 경우 에너지 소비에 초점이 맞춰져 있지만, 본 연구의 경우 중층화를 대비하여 구조적 성능도 고려하여 아연도금강판(SGC58)과 FRP를 에폭시로 부착하여 150SL 형태의 복합스터드를 개발하였다. 복합스터드의 소재로는 두께 1.0mm과 1.2mm 강판과 두께 4mm(4ply), 6mm(6ply)의 FRP를 적용하였고, 4가지의 접합 상세에 대한 제작 및 실험을 통해 최종적으로 우수한 결과를 보인 2가지를 선택하였다. 이와 같은 과정을 거쳐 개발된 복합스터드의 압축 성능을 확인하기 위해 2가지 접합 상세에 대해 단면 높이인 150mm에 대해 3, 6, 9, 12배 길이에 대해 압축 실험을 계획하였고, 기존 스틸 스터드와 비교하기 위하여 동일 형태의 비교 실험체도 제작하였다. 실험결과, 복합스터드의 최대하중은 강판 두께 1.0mm인 경우 동일 두께의 스틸 스터드보다 평균 1.62배, 1.2mm인 경우 평균 1.46배 증가하였으며, 가력 종료 시점에 이르기까지 일체 거동을 보여 구조적으로 우수함이 입증되었다.
The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.
Objectives: This study focused on three aspects: characterizing concentrations of airborne particles by size distributions and asbestos fibers generated by various building materials; analyzing the characteristics of fibers produced by each simulation and asbestos fibers released from ACBMs; and investigating correlations of airborne asbestos fibers and particles generated and association of particle and asbestos concentrations. Methods: We selected three ACBMs including an insulation board, cement asbestos slate and wallboard. We constructed 4 scenarios; a) crushing with a hammer; b) cutting with a industrial knife; c) brushing with a metal brush; and d) tightening & loosening with a hand drill. We implemented one simulation for 30 seconds followed by 30 seconds resting period. We repeated a total of 5 cycles for 5 minutes. Results: The highest concentration of particulate & fibrous matters was from crushing with a hammer in each scenario followed by brushing with a metal brush, cutting with a industrial knife, and tightening & loosening with a hand drill. For ACBMs studied, asbestos concentrations were highest from an insulation board followed by cement asbestos slate, and wallboard. No difference in terms of concentration was found between an insulation board and asbestos slate. Fibers with $5{\sim}20{\mu}m$ in length were included in 76~90% of total fibrous matters. The distribution of the straight form fibers was greater than that of the curl form. About 90% of $PM_{Total}$ released from ACBMs was consisted of $PM_{10}$ while only 10% of $PM_{Total}$ was $PM_{2.5}$. Particulate matters like $PM_{2.5}$ was significantly correlated with fibrous matters($R^2=0.81$). Conclusions: We found ACBMs can significantly release asbestos fibers as well as $PM_{2.5}$. Concentrations of asbestos generated by ACBMs were well correlated with $PM_{2.5}$.
버섯의 혼합배지에 사용되는 배지원료의 아미노산과 일반성분을 분석한 결과, 순단백질(아미노산) 함량은 대두박이 44.02%로 가장 높았고, 건비지가 31.5, 면실박이 30.6%로 나타났다. 주요 질소원 배지지료의 비단백태질소화합물(NPN)의 조단백질에 대한 비율은 대두박이 2.4%, 건비지는 5.6%였지만, 탄소원 배지재료인 미강과 밀기울은 17.6%로써 높았다. 조단백질/가격(원)은 채종박이 6.0으로 가격대비 조단백질량이 높은 것을 알 수 있었다. 균사생장에 관여하는 가용성무질소물(NFE)는 알파콘이 72.9%, 소맥피B가 57.2%로 높았다. 산성세제불용섬유(ADF)는 콘콥이 51.88%로 높았는데, 잣버섯 등 갈색부후균이 이용하기 어려운 리그닌이 포함되어 있으므로 사용에 주의가 필요하다.
배경: 혈관질환의 수술에 사용되는 인공 도관의 막힘과 문합부위의 좁아짐 등을 개선하기 위한 방법으로 조직공학적인 방법과 자가 세포를 이용한 인공혈관의 제작이 대안으로 대두되고 있다. 저자들은, 생흡수성이 있는 고분자 폴리머 지지체와 자가 골수세포를 이용한 인공혈관으로 생체실험을 시행하였다. 대상 및 방법: 생분해성 고분자 재료인 poly (lactide-co-${\varepsilon}$-caprolactone) (PLCL)과 poly(glycolic acid) (PGA) fiber로 혈관용 지지체를 제작한 후, 피실험 동물의 골수를 채취하여 혈관 내피 세포와 평활근 세포로 분열시켜 배양한 후 혈관 지지체위에 이식하였다. 만들어진 인공 혈관을 잡견의 복부대동맥에 이식한 후 3주 후에 혈관 조영술을 시행하고, 안락사 후에 혈관을 제거하여 조직학적 검사를 시행하였다. 결과: 6마리의 잡견 중 2마리에서 수술 후 10일에 혈관 지지체의 균열에 의한 대량 출혈로 사망하였다. 나머지 4마리의 잡견은 수술 후 3주까지 생존하였으며, 혈관 조영술상 혈관의 막힘이나 좁아짐은 발견되지 않았다. 인공 혈관의 내면은 작은 혈전들이 붙어 있었으며, 조직학 검사에서 정상 혈관과 유사한 3층의 구조를 나타내었다. 또한 면역화학 검사에서 혈관 내피세포와 혈관 평활근 세포가 재생된 것을 확인하였다. 결론: 고분자 폴리머와 자가 골수세포를 이용한 인공혈관은 생체 내에서 정상혈관과 유사한 모양으로 재생이 가능함을 보여주었다. 그러나, 동맥압력에 견디기 위해 혈관 지지체의 물성에 대한 개량과 충분한 양의 혈관 세포를 얻기 위한 연구가 더 필요할 것으로 생각된다.
항공기가 적은 동력으로 장시간 체공을 하기 위해서는 높은 양항비(Lift Drag Ratio)와 구조경량화가 요구된다. 일반적으로 고고도 장기체공 비행기에는 가로세로비가 큰 날개가 적용된다. 또한 기체의 주요 구조물에 고강도, 고강성 탄소섬유복합재료를 사용하고, 날개의 표피(Skin)에 박막(Membrane) 소재인 얇은 마일러(Mylar)를 사용된다. 그 결과 날개 구조물이 다른 구조물에 비하여 유연해진다. 그리고 박막 소재인 얇은 마일러의 강성이 동적 안정성에 영향을 미치게 된다. 본 연구에서는 비선형 갭(Gap) 요소를 사용하여 마일러의 박막 특성을 모사하였다. 그리고 비선형해석 결과를 이용하여 등가강성을 갖는 선형 쉘(Shell) 요소로 등가모델링 하는 방법을 제시하였다. 선형 등가 쉘 모델은 멤브레인 요소법를 이용한 비선형해석 결과와 비교하여 결과의 타당성을 검증하였다. 제안된 선형등가 쉘 모델은 모드 해석에 적용하여 마일러의 기계적 물성이 고유진동수에 미치는 영향을 평가하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.