• 센서학회지
• /
• 제17권2호
• /
• pp.95-99
• /
• 2008

Various etching methods of optical fiber and formation of metal nano particles on the optical fiber have been proposed for fabrication of fiber optic localized surface plasmon resonance (FO LSPR) biosensors. Different types of etched optical fiber are possible by removing the cladding of optical fiber using HF (hydrofluoric acid) solution and BHF (buffered hydrofluoric acid) solution, which results in improved surface roughness when BHF solution is used. Localized surface plasmon can be formed and measured by formation of silver and gold nano particles on the etched optical fiber. The characteristics of the etched optical fiber and metal nano particles on the etched surface of the optical fiber play a key role in dictating the sensitivity of the LSPR sensors, so that the proposed results can be expected to be applied for related research on fiber optic based biosensors.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.427-431
• /
• 2006

Formation which is one of the most fundamental characteristic of paper quality is affected by a number of variables. Fiber flocculation in the headbox has been recognized as the most important variable influencing formation. Consistency and crowding number of headbox stock are known to represent the flocculation potential of stocks. The effects of consistency and crowding number on paper formation were studied by measuring the flocculation of fiber suspensions. Increasing consistency increased the degree of fiber flocculation. Especially the consistency of long fiber fraction was the most crucial factor of flocculation. Tensile strength of handsheets was furnish dependent rather than flocculation dependent. Crowding number of a furnish can be used for the characterization of stock flocculation.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.64-69
• /
• 2005

Suitability of corrugating medium for microflute shape formation was analyzed in terms of fiber bonding strength and paper stiffness. Cationic starch and oxidized starch were applied to corrugating medium's surface by bar coater in order to compare the relative importance of stiffness and fiber bonding on microflute formation. It was found that cationic starch was beneficial for better stiffness and oxidized starch was beneficial for better fiber bonding. The results of the decreasing ratio of length by flute formation, the calculated conditioning effect, and the flute height before and after conditioning treatment were obtained. For better microflute shape formation and its preservation it was found that fiber bonding strength should be increased, proper stiffness was required, and resistance to water absorption from surroundings should be increased.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2000년도 봄 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.61-64
• /
• 2000

• 펄프종이기술
• /
• 제38권4호
• /
• pp.24-30
• /
• 2006

Formation which is an indicator of nonuniformity in fiber distribution is concerned with small scale variation in roughness, optical properties, print density, and so on. This study evaluated the formation of sheets which were made usning handsheet former and paper-machine with hydraulic headbox. Optical method and ${\beta}-ray$ method were used for formation test. The fiber type, freeness and basis weight of sheet were considered as variables. The formation of handsheet was affected by fiber type and freeness, and floe size distribution was influenced by basis weight. For machine made sheet, its formation seemed to be dependent on the hydraulic forces in headbox and former. When two formation test methods were compared, there was the highest relationship between optical formation index and normalized standard deviation from ${\beta}-ray$ method.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.1-6
• /
• 2007

Formation which is one of the most fundamental characteristic of paper quality is affected by a number of variables. Fiber flocculation in the headbox has been recognized as the most important variable influencing formation. Consistency and crowding number of head box stock are known to represent the flocculation potential of stocks. The effects of consistency and crowding number on paper formation were studied by measuring the flocculation of fiber suspensions. Increasing consistency increased the degree of fiber flocculation. Especially the consistency of long fiber fraction was the most crucial factor of flocculation. Tensile strength of handsheets was furnish dependent rather than flocculation dependent. Crowding number of a furnish can be used for the characterization of stock flocculation.

• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.107-116
• /
• 1989

Formation of asbestos bodies in various organs of mouse in course of time after intraperitoneal injection of three types of asbestoses was studied. Asbestos bodies as well as asbestos fibers were found both in intrapleural organs such as lung and heart and intraperitoneal organs after intraperitoneal injection of asbestos fiber this suggested the possibility that asbestos fiber could migrate to the whole body. When asbestos was injected intrapleurally asbestos fiber was found in the lung 15 days after injection but asbestos body was not found till 30 days after injection. The process of asbestos body formation was described.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.30-35
• /
• 2008

Mechanical properties of paper mulberry bast fiber handsheets were investigated to study the characteristics of bast fiber in terms of being suitable for modern paper making process. Tensile, tear and burst strength of handsheets made from bast fiber of paper mulberry were better than those of NBKP handsheets. Smoothness of bast fiber was higher but stiffness was lower than NBKP. Sizing performance of bast fiber were worse. 3D image analysis showed that handsheets of bast fiber had inferior formation and more pores comparing to NBKP.

• BMB Reports
• /
• 제30권5호
• /
• pp.337-341
• /
• 1997

In order to investigate the role of a small GTP-binding protein RhoA in lysophosphatidic acid (LPA)-induced stress fiber formation, C3 ADP-ribosyltransferase was prepared by expressing in E. coli and then applied to Rat-2 fibroblasts. C3 transferase isolated from E. coli was as effective as the toxin from Clostridium botulinum in ADP-ribosylation of RhoA. Incubation of the cells with C3 transferase for 2 days induced ADP-ribosylation of RhoA by a dose-dependent manner, with a sub-maximal induction at $25\;{\mu}g/ml$. As expected, LPA-induced stress fiber formation was completely blocked by pre-incubation with C3 transferase for 2 days. However, exogenously added C3 transferase had no significant effect on the formation of phosphatidylethanol by LPA. These results suggested that phospholipase D was not activated by RhoA in the LPA-induced stress fiber formation.