• 전기의세계
• /
• 제28권5호
• /
• pp.39-43
• /
• 1979

The aging of permittivity of a barium titanate dielectrics doped with La$_{2}$O$_{3}$ under zero and low DC field has been studied. The aging rate was decreased as the amount of La$_{2}$O$_{3}$ addition is increased to 3 mole%. The zero field aging rate of barium titahate doped with La$_{2}$O$_{3}$. 3TiO$_{2}$ was similar to that doped with La$_{2}$O$_{3}$.5V/mil DC field aging rate of La$_{2}$O$_{3}$.3TiO$_{2}$ doped sample, howeve, was lowered to that of La$_{2}$O$_{3}$ doped sample. When the phase transformation is occured from the paraelectric state to the ferroelectric state, 90.deg. domains are mucleated in order that the system becomes thermodynamically more stable. It is concluded that the aging phenomenon is occured as the dielectric constant is decreasing by the nucleation and growth of 90.deg. domains.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.709-712
• /
• 2001

The effects of post annealing temperature by the Rapid Thermal Annealing(RTA) on the electrical properties of Pb(Zr,Ti)O$_3$(PZT) thin film were investigated. Analyses by the RTA treatments reveled that the leakage current of PZT thin films strongly depend on heating temperature and time. It was found that leakage current properties of PZT capacitor were changed by heating temperature during the RTA annealing. On Pt/Ti/Si substrates, PZT films are deposited at 350 $^{\circ}C$ by rf magnetron sputtering. The X-ray diffusion (XRD) was confirmed the formation of PZT thin film. Leakage current characteristics were improved with decreasing the post annealing temperature of PZT thin film. RTA annealed film on the 700$^{\circ}C$ shows ferroelectric and electrical properties with a remanent polarization of 12.4${\mu}$C/$\textrm{cm}^2$ coercive field of 117kV/cm, leakage current J= 6.2${\times}$10$\^$-6/ A/$\textrm{cm}^2$

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.207-210
• /
• 2000

Properties of SrTiO$_3$ thin films were characterized under the influence of an applied dc voltage utilizing a gold resonator with a flip-chip capacitor. The measurements were performed at microwave frequency ranges and low temperatures cryogenic temperatures. The dielectric constant of 830 and the low loss tangent of 6X10$^{-3}$ at 3.64 GHz were observed at 90 K and 100 V. The quality in the SrTiO$_3$ film was presented in terms of fractional frequency under the bias voltages and cryogenic temperatures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.927-933
• /
• 2006

The structural and electrical characteristics of PLZT thin films fabricated onto $Pt/IrO_2/Ir/Ti/SiO_2/Si$ substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films for capacitor layer of semiconductor memory devices The slim region 14/50/50 PLZT thin films were fabricated by PLD and estimated the characteristics for memory application 14/50/50 PLZT thin films have crystallize into perovskite structure at the $600^{\circ}C$ deposition temperature, 200 mTorr of oxygen pressure, and 2 $J/cm^2$ of laser energy density. In this condition PLZT thin films had the dielectric constant as high as 985, storage charge density 8.17 ${\mu}C/cm^2$ and charging time 0.20 ns. Leakage current density was less than $10^{-10}A/cm^2$ up to 5 V bias voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.404-407
• /
• 2003

Among the ferroeletric thin films that have been widely investigated for ferroelectric random access memory (FRAM) applications, the $SrBi_2Ta_2O_9$ (SBT) thin film is appropriate as a memory capacitor material due to its excellent fatigue endurance. SBT thin films were etched in high-density $Cl_2/Ar$ in inductively coupled plasma. The maximum etch rate of SBT film is $1834\;{\AA}/min$ under $Cl_2/(Cl_2+Ar)$ of 30 %, rf power of 700 W, dc-bias voltage of -250 V, chamber pressure of 11 mTorr and gas flow rate of 20 sccm.

• 한국산업정보학회논문지
• /
• 제19권2호
• /
• pp.45-49
• /
• 2014

In this work, a phase shifter radio-frequency integrated chip (RFIC) using a simple all-pass network is presented. As a tuning element of the phase shifter RFIC, tunable capacitors with a multi-layer dielectric of a para-/ferro-/para-electrics using a high tunable BST ferroelectric and a low-loss BZN paraelectric thin film were utilized. In order to evaluate and analyze the fabricated phase shifter RFIC, the same elements such as an inductor and capacitor integrated into it are also fabricated and tested. The designed phase shifter RFIC was fabricated on a quartz substrate in the size of $1.16{\times}1.21mm^2$. As the test results, the maximum phase difference of $350^{\circ}$ is obtained at 15 V and its tuning frequency bandwidth is 90 MHz from 2.72 to 2.81GHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1274-1276
• /
• 1994

A study on $BaTiO_3$ ceramics have been shown that dielectric properties of $BaTiO_3$ ceramics strongly depend on the size and ferroelectric domain density of the constituting grain. According to rising substrate temperature from $25[^{\circ}C]$ to $600[^{\circ}C]$, the peak intensity and crystal plane in XRD are increased. In this study, $BaTiO_3$ thin film prepared by RF sputtering from room temperature to $600[^{\circ}C]$ of substrate temperature. Therefore, we tried to investigate the relation between the characteristics of ceramics structure and dielectric factor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 1999

PLZT thin films were fabricated with different energy density by pulsed laser deposition. PLZT films deposited on Pt/Ti/SiO$_2$/Sr substrate. This PLZT thin films of 5000$\AA$ thickness were crystallized at $600^{\circ}C$, 200mTorr $O_2$ pressure for 2 J/$\textrm{cm}^2$ laser energy density. 14/50/50 PLZT thin film showed a maximum dielectric constant value of $\varepsilon$$_{r}$=1289.9 P-E hysteresis loop of 14/ 50/50 PLZT thin film was slim ferroelectric. Leakage current density of 14/50/50 PLZT thin film was 10/ sup -7/=A/$\textrm{cm}^2$.>.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.648-657
• /
• 1995

정보처리의 다양화, 고속화를 위하여 장래의 집적회로는 다량의 정보를 단시간에 처리하지 않으면 안된다. 종래, 3년에 4배의 고집적화가 실현되어 LSI개발에 기술 견인차의 역할을 하고 있는 DRAM(Dynamic Random Access Memory)은 미세화기술의 한계를 우려하면서도 오히려 개발에 박차를 가하고 있다. 이러한 DRAM의 미세, 대용량화에는 미세가공 기술, 새로운 메모리 셀과 트랜지스터 기술, 새로운 회로 기술, 그 이외에 재료박막기술, Computer aided design/Design automation(CAD/DA) 기술, 검사평가기술 혹은 소형팩키지(package)기술등의 광범위한 기술발전이 뒷받침되어 왔다. 그 중에서 미세가공 기술 및 새로운 트랜지스터 기술과 메모리 셀 기술을 중심으로 개발 동향을 살펴보고 최근에 발표된 1Gbit DRAM의 시제품 기술에 대하여 분석해 보기로 한다.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.49-53
• /
• 2001

유도결합형 플라즈마 (ICP-RIE) 장치를 이용하여 SBT ($SrBi_2Ta_2O_9$)/Si의 수직식각 실험을 하였다. 이와 같은 실험의 목적은 수직 단면구조의 강유전체 gate구조 및 capacitor 제조에 있어서 유효면적을 확보하고 parasitic effect를 최소화 하는 기술이 우수한 소자 특성을 얻기 위해 매우 중요한 기술이기 때문이다. $Ar/C1_2$를 반응가스로 사용하였으며 $Ar/C1_2$유량비를 각각 1, 0.8, 0.6, 0.4로 바꾸어 가면서 각 유량비에 대해 RF power를 700, 600, 500W로 변화시키는 동안 DC power를 각각 200, 150, 100, 50 W로 변화시키면서 식각 실험을 하였다. 식각조건 변화에 따른 수직 및 수평 식각율, 선택식각율, 감광막의 보호성, 리소그라피 조건에 따른 식각율 및 식각단면 구조의 특성, 식각율 변화에 따른 패턴 크기의 변화, SBT의 식각 단면 특성 등을 조사하였다. $Ar/C1_2$유량비가 0.8, RF power 700 W, DC power 200 W 일 때 식각속도는 1050 A/min으로 최적의 식각율을 확인하였다. 그리고 주사전자현미경의 관찰 결과 수 적도는 $82^{\circ}C$ 정도로 매우 양호함을 알 수 있었다.