• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.44-48
• /
• 2001

Tube hydroforming technology has increased dramatically, mainly by automotive industry in europe and the americas. It is required tube formability, optimized with regard to tribological factors and specially designed die and presses. In this process has many important parameters as expansion ratio of a tube, axial feeding, internal pressure and preforming low pressure. The following paper discusses to combine forming factors and expectation of manufacture problem by hydroforming of automotive radiator support member.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.210-213
• /
• 2004

Based on plastic instability, analytical prediction of bursting failure on tube hydroforming processes under combined internal pressure and independent axial feeding is carried out. Bursting is irrecoverable phenomenon due to local instability under excessive tensile stresses. In order to predict the bursting failure, three different classical necking criteria such as diffuse necking criterion for sheet and tube, local necking criterion for sheet are introduced. The incremental theory of plasticity fur anisotropic material is adopted and then the hydroforming limit and bursting failure diagram with respect to axial feeding and hydraulic pressure are presented. In addition, the influences of the material properties such as anisotropy parameter, strain hardening exponent on bursting pressure are investigated. As results of the above approach, the hydroforming limit in view of bursting failure is verified with experimental results.

• Journal of Chest Surgery
• /
• 제25권6호
• /
• pp.581-587
• /
• 1992

Tracheoesophageal fistula[TEF] is a rare but life-threatening lesion that may occur from ventilation with a cuffed tube. It occurs most frequently when an inlying esophageal tube is also being used-usually for feeding purposes. The mechanism of injury appears to be pressure experted on the tracheal wall by the cuff, which then compresses the "party wall" of the trachea and esophagus against the foreign body that lies in the esophagus. The patient was 32 years old female who had been receiving a treatment of respiratory failure induced by postoperative sepsis with assist ventilator and nasogastric tubal feeding. Sudden attack of abdominal gas distention and massive drainage of gas through N-G tube were developed during assist ventilation in that patient, so we diagnosed as tracheal stenosis with a tracheoesophageal fistula induced by prolonged endotracheal intubation We performed tracheal reconstruction and primary closure of perforated esophagus after weaning ventilator. The postoperative course was uneventiful.eventiful.

• 소성∙가공
• /
• 제24권1호
• /
• pp.20-27
• /
• 2015

Hot tensile tests were conducted at different temperatures ranging from $20^{\circ}C$ to $550^{\circ}C$ to evaluate the mechanical properties of Al5052 seamless tubes. Such tubes can provide the technological foundation for complex forming using hot air bulging. Hot air bulging is one of the recently developed hydroforming techniques and it has some limitations in terms of cycle times. The benefits of hot air bulging are weight and cost savings through part consolidation and reduced post-forming processes such as welding and piercing. In order to extend the forming limits of Al lightweight material hot air bulging was investigated. A heated tube was placed in a heated die and sealed at the ends by sealing cylinders. The heated tube was subsequently expanded against the die cavity wall by internal pressure using air medium. The results of the current study show that axial feeding speed and air pressure have an effect on the formability of Al tubes during air bulging at elevated temperatures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.116-119
• /
• 2007

The application of light weight materials, such as aluminum alloy, has been limited due of their poor formability. Especially, aluminum alloy tube has limited expansion capability at most 15% at room temperature. New manufacturing process, called hot air forming, is introduced to apply aluminum tube to the automotive suspension components which have complex shape and require high expansion ratio about 40%. The process is carried out at the elevated temperature above $500^{\circ}C$, so numerous material properties and process parameters related to the high temperature should be investigated and determined to get a sound product. In this study, the effect of thermal properties and forming parameters such as the temperature of tool, axial feeding and gas pressure are analyzed by using explicit finite element method.

• 소성∙가공
• /
• 제13권7호
• /
• pp.629-634
• /
• 2004

Based on plastic instability, analytical prediction of bursting failure on tube hydroforming processes under combined infernal pressure and independent axial feeding is carried out. Bursting is irrecoverable phenomenon due to local instability under excessive tensile stresses. In order to predict the bursting failure, three different classical necking criteria such as diffuse necking criterion for sheet and tube, local necking criterion for sheet are introduced. The incremental theory of plasticity for anisotropic material is adopted and then the hydroforming limit and bursting failure diagram with respect to axial feeding and hydraulic pressure are presented. In addition, the influences of the material properties such as anisotropy Parameter, strain hardening exponent and strength coefficient on bursting Pressure are investigated. As results of the above approach, the hydroforming limit in view of bursting failure is verified with experimental results.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.83-86
• /
• 2008

In this study, friction test was proposed to obtain coefficient of friction between tube and die in guide zone of tube hydroforming and friction coefficients were evaluated at different materials, viscosity of lubricants and internal pressures. For this study, STKM11A and SUS tubes were prepared. The tube was expanded by an internal pressure against the tool wall. By pushing the tube through the tool, a friction force at the contact surface between the tube and the tool occurs From the recorded axial feeding forces, the friction coefficients between tube and die at the guide zone in tubular hydroforming can be estimated. The effects of the various internal pressures, viscosity of lubricants, tube materials, tube size and die coating on the friction forces and friction coefficients are discussed.

• 소성∙가공
• /
• 제16권8호
• /
• pp.567-574
• /
• 2007

Double layered tube is assembled with an inner tube and an outer tube, similar in material or not, contacting closely and deforming simultaneously when subjected to external force. For the manufacturing of double layered tube, the hydroforming assembly technology has several advantages. Therefore in this study, hydroforming characteristics of double layered tube was investigated. The free bulge test was performed to produce formability diagrams of double layered tubes at various forming pressure and feeding amounts. The hexagonal shape hydroforming test was also performed to estimate the dimensional accuracies of double layered tube through the corner filling ratio and the gap between inner and outer tube. Besides experimental analyses, the analytical model that can predict internal pressure for the hydroforming of double-layered tube was proposed and experimentally validated.

• 대한지역사회영양학회지
• /
• 제19권2호
• /
• pp.187-197
• /
• 2014

Objectives: This study was carried out to determine nutritional status of elderly patients in a long-term care hospital according to meal type and eating ability. Methods: Subjects were 47 female patients aged over 65 ($79.3{\pm}7.1$ years) who resided in a long-term care hospital in Seoul. Thirty seven patients who ate diet orally were grouped according to meal type (27 general diet and 10 soft diet) and eating ability (26 eating by oneself and 11 eaten with help) and 10 were on tube feeding. Nutritional status was determined by food consumption and mid-arm circumference. Results: The mean adequacy ratios (MARs) of 12 nutrients (protein, calcium, phosphorus, zinc, vitamin A, vitamin $B_1$, vitamin $B_2$, vitamin $B_6$, niacin, folic acid, vitamin C) were 0.687 for general diet, 0.565 for soft diet, 0.680 for eating by oneself and 0.677 for eaten with help, which were significantly lower than 0.982 for tube feeding (p < 0.05 or p < 0.01). The patients on tube feeding had significantly lower % arm circumference compared to those who ate general diet (84.0% vs. 95.4%, respectively, p < 0.05). Nutrients intakes, nutrient adequacy ratio (NAR) and index of nutritional quality (INQ) were not different between meal types as well as eating ability. The most insufficiently consumed nutrients by the patients on diet were folic acid, vitamin $B_2$, and calcium (NAR 0.334~0.453, 0.515~ 0.539, and 0.516~0.533, respectively). Conclusions: The results suggested that regardless of meal type or eating ability, the subjects who were on diets in this study might have inadequate intake of folic acid as well as vitamin $B_2$, and calcium, which need to be reflected on menu planning. The measurement of mid-arm circumference presented more risk of malnutrition of patients on tube feeding than those on diets, despite apparently better nutrient consumption.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2010