• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.9-14
• /
• 2011

A spectroscopic measuring system was developed in order to determine optical gain of gas laser discharge for any optical transitions between 190[nm] and 800[nm] without laser resonator. With an image optical system and a feedback optical system emission light of laser discharge are entered in a monochromator and received at a photomultiplier. Subsequently optical gain and line intensity are measured.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.131-134
• /
• 1991

We describe the effects of additional feedback in external cavity semiconductor lasers, which are sensitive to feedback phase. It is shown that additional feedback with favorable phase can serve to enhance mode selectivity. The optimum feedback conditions to maximize the system immunity against unwanted additional feedback with unfavorable phase have also been determined.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.273-277
• /
• 2003

A general process of electronic assembly is composed of a series of geometric alignments and bonding/screwing processes. After assembly, the function is tested in a following process of inspection. However, assembly of micro-optic devices requires both processes to be performed in equipment. Coarse geometric alignment is made by using vision and optical function is improved by the following fine motion based on feedback of tunable laser interferometer. The general system is composed of a precision robot system for 3D assembly, a 3D vision guided system for geometric alignment and an optical feedback system with a tunable laser. In this study, we propose a new fast alignment algorithm of micro-optic devices for both of visual and optical alignments. The main goal is to find a fastest alignment process and algorithms with state-of-the-art technology. We propose a new approach with an optimal sequence of processes, a visual alignment algorithm and a search algorithm for an optimal optical alignment. A system is designed to show the effectiveness and efficiency of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.117-123
• /
• 2003

Rotational machines such as optical disk drives, hard disk drives, and so on are subject to periodic disturbances caused by their mechanical characteristics. In the meanwhile, it is well known that repetitive control rejects periodic disturbance effectively. This paper presents a practical application of repetitive control to the track-following servo of an optical disk drive. The repetitive control system is composed of two repetitive controllers which compensate for periodic disturbances generated by track geometry and eccentric rotation of disk and a feedback controller stabilizing the feedback loop. A robust stability for all plant uncertainties is proved using linear matrix inequalities (LMIs). In the controller design, a weighting function is introduced for the feedback controller to ensure a minimum loop gain and a sufficient phase margin. The repetitive controllers and the feedback controller are designed by solving an optimization problem which can consider the robust stability condition and the system performance. The developed repetitive control system is implemented in the digital control system with a 16-bit fixed-point digital signal processor (DSP). Through simulation and experiment. The feasibility of the proposed repetitive control system is verified.

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.15-19
• /
• 1999

The formation of spontaneous transverse optical patterns was investigated in a single feedback mirror system using nematic liquid crystals as nonlinear optical media. By varying the size of an input beam and the feedback distance, we obtained various interesting transverse optical patterns as well as the hexagonal pattern which are predicted theoretically assuming plane wave input. We can explain theoretically these characteristics of various pattern by introducing a ratio of the beam half width and spatial wavelength of the patterns. We have observed that as this ratio increased, the number of spot constituting the patterns also increased. Finally the patte군 evolved into the sucessive hexagon in the transverse plane.

• ETRI Journal
• /
• 제32권1호
• /
• pp.53-61
• /
• 2010

We propose a simple technique to stabilize the optical output intensity of a fiber ring resonator. The electronic feedback circuit system, which consists of two voltage control oscillators, a phase comparator, and a low pass filter, is applied to the fiber ring resonator in order to compensate the optical phase shift in the ring loop. The reference electrical signal determines the operating condition of the fiber ring resonator for the desired optical output signal. The experimental results within the operating range agree well with the analytical results. The simulated performance of the proposed model is also compared with that of other existing models and shows significant improvement over them.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.769-772
• /
• 2008

For several years, many researchers have proposed LED backlight dimming technology for low power consumption and high contrast ratio. One of the major issues plaguing RGB LED with 2D dimming technology is color shift. This undesirable variation makes it difficult to use RGB LED as light sources in the backlight system. This paper describes the useful method of the optical feedback system for 2D dimming RGB LED backlight. The test results show that our proposed method is very suitable for the 2D dimming technology.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.56-57
• /
• 2000

In this paper, DFE with feedforward section(FDFE) is used to mitigate ISI and improve BER generated in the course of storage and retrieval of high-density 2-dimensional data in digital holographic memory system. From the result of experiment, BER performance of DFE with feedforward section is improved about 37% than binary-decision course by direct thresholding.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.44-49
• /
• 2020

In this paper, a new method is presented to measure the refractive index of single plain glass or multilayered materials, based on a laser frequency-shifted confocal feedback microscope. Combining the laser frequency-shifted feedback technique and the confocal effect, the method can attain high axial-positioning accuracy, stability and sensitivity. Measurements of different samples are given, including N-BK7 glass, Silica plain glass, and a microfluidic chip with four layers. The results for N-BK7 glass and Silica plain glass show that the measurement uncertainty in the refractive index is better than 0.001. Meanwhile, the feasibility of this method for multilayered materials is tested. Compared to conventional methods, this system is more compact and has less difficulty in sample processing, and thus is promising for applications in the area of refractive-index measurement.