• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.612-616
• /
• 2012

This paper presents an active current regulator for LED driver IC. The proposed driver circuit is consists of DC-DC converter for supplying constant DC voltage to LED, active current regulator for compensating channel-to-channel current error from LED strings and feedback circuit for controlling duty ratio of the converter. The proposed active current regulator senses current of LED channels by equalizing both $V_{DS}$ and $V_{GS}$ at LED current control transistor. Because the proposed circuit directly measures the LED channel current without a sensing resistor and regulates all channel with same regulation loop, the power consumption and the current error are much small compared with previous works. The measured maximum efficiency of overall LED driver IC is approximately 94% and current error of LED channel-to-channel is under ${\pm}1.3%$. The proposed LED driver IC is fabricated Dongbu 0.35um BCD process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.623-631
• /
• 2010

In this paper, various of pilot-assisted channel estimation techniques for 3GPP LTE downlink are tested under multipath Rayleigh fading channel. At first, the conventional channel estimation techniques are applied with linear zero-forcing (ZF) equalizer, such as one dimensional least square (1-D LS) linear interpolation, two dimensional (2-D) wiener filter, the time and frequency dimension separate wiener filter and maximum likelihood estimator (MLE). Considering the practical implementation, we proposed two channel estimation techniques by combining time-dimension wiener filter and MLE in two manners, which showed a good tradeoff between system performance and complexity when comparing with conventional techniques. The nonlinear decision feedback equalizer (DFE) which can show a better performance than linear ZF equalizer is also implemented for mitigating inter-carrier interference (ICI) in our system. The complexity of these algorithms are calculated in terms of the number of complex multiplications (CMs) and the performances are evaluated by showing the bit error rate (BER).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.47-54
• /
• 1982

In this paper, a improved per-channel PCM Coder with 1-bit interpolation is proposed. The coder converts a telephone signal to 15-segments u-law PCM signal of a large dynamic range. The A/D conversion technique of the proposed converter requires a feedback loop around a quantizer operates at high speed, and a accumulater for accumulating the quantized values to provide PCM outputs. To obtain both linear and compressed PCM signals a improved table look-up method is presented. The operations of the proposed converter are certified through the experiments to be good. The experimental circuit comprises TTL logic gates, a resistive D/Z converter and a simple differential amplifier. From the results of the experiments, it is known that the proposed converter has many advantage to be adopted economically for per-channel onverter used in rural area service.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.531-531
• /
• 2006

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.668-675
• /
• 2001

Recently, the performance of the commercial PCS(Personal Communication Service) system has been improved to the uppermost limit and ultimately the next generation mobile communication is to be realized by IMT-2000 (International Mobile Communication-2000) to provide multimedia services. Therefore, the new type receiving system is researched actively and one of the most important part in a receiver is direct conversion method. The direct conversion method is suitable for low power consumption, small size, MMIC, and low price, which is to be adopted to the next generation mobile communication systems. In this case, however, several problems occur due to DC-offset. The DC-offset suppresses amplification of the required signal because of the leakage signal of frequency synthesizer in the system. In this thesis, the removing method of DC-offset was considered. There are four removing techniques of DC-offset, which are AC-coupling, large capacitor, DC-feedback loop, and DC-free coding. Among these, the AC-coupling method is the most simplest method and the DC-feedback loop method has the best performance. Then, the performance of the AC-coupling method and DC-feedback loop method are evaluated by HP's ADS simulation tool. As a result, the AC-coupling method cannot be used to the digital communication systems due to data loss. On the other hand, it was confirmed that the DC-feedback loop method is suitable for the direct conversion receiver.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.3-4
• /
• 2009

As device process technology advances, effective channel length, the thickness of gate oxide, and supply voltage decreases. This paper describes a novel electrostatic discharge (ESD) protection device which has current feedback for high ESD immunity. A conventional Gate-Grounded NMOS (GGNMOS) transistor has only one ESD current path, which makes, the core circuit be in the safe region, so an GGNMOS transistor has low current immunity compared with our device which has current feedback path. To simulate our device, we use conventional $0.18\;{\mu}m$ technology parameters with a gate oxide thickness of $43\;{\AA}$ and power supply voltage of 1.8 V. Our simulation results indicate that the area of our ESD protection, device can be smaller than a GGNMOS transistor, and ESD immunity is better than a GGNMOS transistor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.464-473
• /
• 2006

This paper summarises theoretical and experimental work on the feedback control of sound radiation from honeycomb panels using piezoceramic actuators. It is motivated by the problem of sound transmission in aircraft, specifically the active control of trim panels. Trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. Local coupling of the closely-spaced sensor and actuator was observed experimentally and modelled using a single degree of freedom system. The effect of the local coupling was to roll-off the response between the actuator and sensor at high frequencies, so that a feedback control system can have high gain margins. Unfortunately, only relatively poor global performance is then achieved because of localisation of reduction around the actuator. This localisation prompts the investigation of a multichannel active control system. Globalised reduction was predicted using a model of 12 channel direct velocity feedback control. The multichannel system, however, does not appear to yield a significant improvement in the performance because of decreased gain margin.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.427-432
• /
• 2010

To reduce the outage probability and to increase the transmission capacity, the importance of repeaters in cellular systems is increasing. But a RF(Radio Frequency) repeater has a problem that the output of the transmit antenna is partially feedback to the receive antenna, which is feedback interference. In this paper, we proposed adaptive Sign-Sign LMS(Least Mean Square) algorithm using correlations for the performance enhancement of RF repeater. The weight vector is updated by using sign of input signal and error signal to the least squared error of the conventional algorithms. When compared with the conventional method, the proposed canceller achieves the maximum 10 dB performance gain in terms of the MSE(Mean Square Error).

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.386-390
• /
• 2023

In this study, we examined the quasi-nonvolatile memory characteristics of silicon nanosheet (SiNS) feedback field-effect transistors (FBFETs) fabricated using a complementary metal-oxide-semiconductor process. The SiNS channel layers fabricated by photoresist overexposure method had a width of approximately 180 nm and a height of 70 nm. The SiNS FBFETs operated in a positive feedback loop mechanism and exhibited an extremely low subthreshold swing of 1.1 mV/dec and a high ON/OFF current ratio of 2.4×10⁷. Moreover, SiNS FBFETs represented long retention time of 50 seconds, indicating the quasi-nonvolatile memory characteristics.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.123-130
• /
• 2004

In this paper, an advanced error tracking algorithm by using feedback channel was proposed for error resilient transmission. Using this proposed algorithm, the propagation of errors were reduced within the decoded data over bit error prone network. The addresses of corrupted blocks are reported to encoder by decoder. With negative acknowledgments of feedback channel, the encoder can precisely calculate negative acknowledgments and track the propagated errors by examining the backward motion dependency for proper pixel in the current encoding frame. The error-propagation effects can be terminated completely by INTRA refreshing the affected macro-blocks by using proposed error tracking algorithm. By utilizing the selective four-corner error tracking approximation, the error tracking computations of the proposed algorithm is less than that of the algorithm using full pixel without substantial degradation in video quality. The proposed algorithm can track errors rapidly and accurately.