• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2013

In this study, we carried out the turning of plastic mold steel(STAVAX) with whisker reinforced ceramic tool(WA1) and analyzed ANOVA(Analysis of Variance) test. Multi-regression analysis was performed to find influential factors to surface roughness and to derive regression equation. Results are follows: From ANOVA test and confidence interval analysis of surface roughness, We found that influential factors to surface roughness was feed rate, cutting speed and depth of cut in order. From multi-regression analysis, we derived regression equation of STAVAX. it's coefficient of determination($R^2$) was 0.945 and It means that regression equation is significant. From experimental verification, we confirmed that surface roughness was predictable by regression equation. Compared with former research, we confirmed that increase of feed rate is the main cause of the growing of surface roughness and cutting force.

• Journal of Food Hygiene and Safety
• /
• v.7 no.2
• /
• pp.107.2-119
• /
• 1992

Fish pathology is one of the main scientific bases upon which this expansion in aquaculture has been dependent and requires a wide knowledge of the environmental constraints, the physiology and characteristic of the various pathogens, the responses of the host, and the methods by which they may be controlled. The primary disease and parasite problems in aquaculture animals related to viral, bacteria, fungal and protozoan epizootics. Parasitic nematodes, trematodes and cestodes are commonly found in aquaculture animals, but seldom are they present in concentrations sufficient to cause significant problems, When an epizootic does occur and chemical treatment is indicated, the appropriate chemical must be selected an properly applied. We have antibiotics, sulfa, nitrofuran and other chemicals for treatment of fish diseases, Some may be mixed with the feed during formulation, added to the pellets of feed as a surface coating, given in the form of an injection or used as a bath. Even though a drug or chemical has been officially approved for use in aquaculture, the substance should never be used unless there is a clear need, Some of the reasions for this view are as follows: (1) the constant use of antibiotics can leak to the development of resistant strains of bacteria, (2) biofilter efficiency may be impaired or destroyed by chemicals added to closed recirculating water systems, and(3) the injudicious use of chemical can have a damaging effect on the environment as well as on human.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.175-191
• /
• 2020

In this study, the effect of Nano silica (SiO2) on the buckling strength of the glass fiber reinforced laminates containing the machining process causes holes were investigated. The tests have been applied on two status milled and non-milled. To promote the mechanical behavior of the fiber-reinforced glass epoxy-based composites, Nano sio2 was added to the matrix to improve and gradation. Nano sio2 is chosen because of flexibility and high mechanical features; the effect of Nanoparticles on surface serenity has been studied. Thus the effect of Nanoparticles on crack growth and machining process and delamination caused by machining has been studied. We can also imply that many machining factors are essential: feed rate, thrust force, and spindle speed. Also, feed rate and spindle speed were studied in constant values, that the thrust forces were studied as the main factor caused residual stress. Moreover, entrance forces were measured by local calibrated load cells on machining devices. The results showed that the buckling load of milled laminates had been increased by about 50% with adding 2 wt% of silica in comparison with the neat damaged laminates while adding more contents caused adverse effects. Also, with a comparison of two milling tools, the cylindrical radius-end tool had less destructive effects on specimens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.509-514
• /
• 1993

The experiment was conducted to determine the effect of different fiber levels on milk production of crossbred Holstein milking cows fed urea-treated rice straw (UTS) as a roughage. Eight cows were allotted into 2 squares of 4 cows each with 4 treatments by a balanced design. The treatments were 17%, 22%, and 24% crude fiber (CF) diets and Thai feeding system (free choice of roughage and 1 kg of concentrates/2 kg of milk) as a control. Body weight change was not significantly different among the treatments during the experiment. Milk production (4% FCM) and milk protein content wee not different among the treatments, but milk fat content was low in the 17% CF group and high in the control group. Cows fed the 17% CF diet consumed less UTS and more concentrates than the others, and consequently total DM intake was not different among the treatments. The feed conversion ratio was significantly higher in the control. Feed cost per kg milk was lowest in the control and highest in the 17% CF diet. The fiber content of the diet would be more than 17%, preferably 22-24% for normally producing Thai crossbred Holstein cows when the UTS was fed as a main roughage source.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.835-840
• /
• 2005

The main objective of the present study was to determine the effect of dietary $\beta$-cyclodextrin ($\beta$-CD) on egg laying performance and cholesterol content of egg yolk. Feed intake, egg production and egg weight varied slightly, but not significantly, between hens fed either a control diet or a diet containing one of an increasing series of $\beta$-CD concentrations (2%, 4% or 6%). However, feed intake, egg production and egg weight were all lower in the hens fed on 8% $\beta$-CD (p<0.05). No difference in haugh unit values, egg yolk color and egg shell thickness were found between the different treatments. The cholesterol content of egg yolks (mg/g yolk) was significantly decreased by 0.71, 2.98, 4.00 and 4.24 mg in eggs from hens maintained on 2%, 4%, 6% and 8% $\beta$-CD, respectively (p<0.05). These observations indicate that appropriate supplementation of diets with $\beta$-CD can reduce the cholesterol content of eggyolks, thus raising the prospect of the production of a healthier functional food.

• Nuclear Engineering and Technology
• /
• v.31 no.4
• /
• pp.375-384
• /
• 1999

The credibility of CHECWORKS FAC model analysis was evaluated for plant application in a model plant chosen for demonstration. The operation condition at each pipe component was defined before the wear rate analysis by plant data base, water chemistry analysis, and network flow analysis. The predicted wear was compared with the measured wear for 57 sample components selected from 43 susceptible line groups analysed. The inspected 57 locations represent components of highest predicted wear in each line group. Both absolute value and relative ranking comparisons indicated reasonable correlations between the predicted and the measured values. Four components showed much higher measured wear rates than the predicted ones in the feed water train from main feed water pump discharge to steam generator, probably due to high hydrazine concentration operation the effect of which had not been incorporated into the CHECWORKS model. The measured wear was higher than the predicted one consistently for components with least susceptibility to FAC. It is believed that the conservatism maintained during UT data analysis dominated the measurement accuracy. A great deal of enhancement is anticipated over the current plant pipe management program when a comprehensive plant pipe management program is implemented based on the model analysis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.56-68
• /
• 2014

This paper presents an experiment on the modeling, analysis, prediction and optimization of machining parameters used during the turning process of the low-carbon steel known as ST40. The parameters used to develop the model are the cutting speed, the feed rate, and the depth of the cut. The experiments were carried out under various conditions, with three level of parameters and two different treatments for each level (with and without a lubricant), to determine the effects of the parameters on the surface roughness and electric current consumption. These effects were investigated using response surface methodology (RSM). A second-order model is used to predict the values of the surface roughness and the electric current consumption from the results of experiments which collected preliminary data. The results of the experiment and the predictions of the surface roughness and electric current consumption under both treatments were found to be nearly identical. This result shows that the feed rate is the main factor that influences the surface roughness and electric current consumption.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.321-328
• /
• 1998

When we control the level of the steam generator in the nuclear power plants, a swell and shrink arises from many disturbances such as feed water rate, feed water temperature, main steam flow rate, and coolant temperature. If we use the conventional type of PI controller in this system, we will not have stability during controlling at lower power, the removal function of disturbances, and a load follow-up control effectively. In this paper, we study the application of a 2-Degree of Freedom(2-DOF) PID controller to the level control of the steam. generator of nuclear power plants through the simulation and the experimental steam generator. We use the parameters $\alpha$, $\beta$, $\gamma$ of the 2-DOF PID controller for the removal of disturbances and the parameters Kp,Ti,Td of the conventional type of PID controller for controlling setpoint. The back-propagation learning algorithm of neural network is used for tuning the 2-DOF PID controller. We can find satisfactory results of the removal of the disturbances and the tracking function in the change of setpoint through the simulation and experimental steam generator.

• Current Industrial and Technological Trends in Aerospace
• /
• v.9 no.1
• /
• pp.130-138
• /
• 2011

A vent relief valve performs as a safety valve, which ensures ventilation of propellant tank during filling and protection from tank overpressure after filling. Because of the reliability and cost saving, the virtually same vent relief valve has been used on all US cryogenic liquid fueled launch vehicles. Some modification to the valve has been applied to satisfy the various mission requirements of launch vehicles. This paper reviews the main technology trends of the vent relief valve applied to the propellant feed system for launch vehicle with respect to design and manufacture. This paper also introduces the operating technology of vent relief valve applied for launch vehicles of advanced countries in space development.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.14-19
• /
• 2021

The reduction of carbon dioxide emissions becomes a global issue, the main source of carbon dioxide emissions in the Asian region is the energy conversion sector, especially coal-fired power plants. We are working to develop technologies that will at least limit the increase in carbon dioxide emissions from the thermal power plants as one way to reduce carbon dioxide emissions. Our research aims to reduce carbon dioxide emissions by removing iron oxide scale from the feedwater system of thermal power plants using a superconducting high-gradient magnetic separation (HGMS) system, thereby reducing the loss of power generation efficiency. In this paper, the background of thermal power plants in Asia is outlined, followed by a case study of the introduction of a chemical cleaning line at an actual thermal power plant in Japan, and the possibility of introducing it into the thermal power plants in China based on the results.