An Experiment was carried out to find the scheme far minimization of burr formation on inclined exit surface in drilling. Several drills with different geometry are used for drilling the workpiece with inclined exit surface. Step drills are specified with step angle and step size. The influence of the inclination angle of exit surface on burr formation was observed, which enables to analyze the burr formation mechanism on inclined exit surface. Along the edge on the inclined exit surface, burrs are formed by the bending deflection to feed direction and also burrs are formed in exit direction of cutting edge. To minimize the burr formed in feed direction, the corner angle which is formed by the inclination angle and step angle must be large enough not to be bent to burr. By decreasing step angle of drill and decreasing the distance between two axes of two holes, burr formation at the intersecting holes can be minimized. Burr formation mechanisms are analyzed according to the drill geometries and cutting conditions. Several schemes far burr minimization on inclined exit surface were proposed.
This paper proposed a simple method for measuring surface roughness of ground surface. utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens a detecting unit with polygon mirror and CCD array sensor. and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultanilusly monitor the state of the grind wheel. The experimental results, showed that the increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min. the feed rate is 0.2m/min-0.9m/min, the dressing speed is 0.2mm/rev-0.4mm/rev, the stylus method and the in-process method can be obtained the same results. thus under limited working conditions. using the proposed system. the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.
본 연구는 2004년도 2월에서 3월까지 철원분지의 민간인통제지역에서 두루미와 재두루미의 차량에 대한 반응 행동과 함께 방해요인과 먹이와의 수지균형에 관하여 실시하였다. 재두루미의 도로로부터의 평균취식거리는 두루미에 비하여 가까웠다. 두루미와 재두루미 모두 무리크기가 클수록 도로로부터 떨어진 평균거리는 증가하였다. 두루미와 재두루미는 차량의 근거리 정지에 대하여 경계, 걷기, 뛰기, 비행의 반응을 보였으며, 도로에서 가까울수록 차량에 대하여 민감하게 반응하였다. 도로에서 멀수록 차량의 정지에 대한 반응 시간은 두루미와 재두루미 모두 감소하였다. 차량의 정지에 대하여 반응을 보이지 않는 반응역치거리는 두루미와 재두루미 모두 250m이었다. 두루미는 200m내에서 재두루미에 비하여 민감하게 반응하였다. 도로 교통량이 증가함에 따라 동일거리에서의 반응시간은 변화가 없었지만, 도로인근 지역에서 멀어지게 하고 해당지역을 취식지로 이용하지 않게 하는 영향이 있었다. 두루미와 재두루미가 차량 통행 등의 방해요인에도 불구하고 낙곡을 취식했던 것은 도로인근 지역의 잔존 낙곡의 밀도가 높았기 때문이었다.
An inducer is employed in a modern rocket feed system because it allows a turbopump system to operate at a high speed with low inlet pressures so as to minimize the weight and the size of the system. Cavitation performance can be improved by installing an inducer to the pump, enabling to increase the operational speed of the pump. The main purpose of an inducer is to increase the static pressure prior to an impeller to enable the impeller to operate satisfactorily under cavitation environments. In the present study the effects of axial distance between the inducer and the impeller on the performance of the pump were studied using both experimental and computational methods. Two inducers with different axial length were used for the experiments and the pump performances were measured. The experimental results show that the suction performance decreases as the axial gap between the inducer and impeller is increased.
This study was performed to determine the causes of the bursting casualties such as death of sows and piglets, abortion, still birth and infertility in a pig farm after consecutive detonation for three months to construct 345 KV in Kimje area. 1. Temperatures in Kimje district, management condition, microorganism in the feed, inbreeding, hematological conditions, and viral agent causing abortion were not proved as the factors of acute occurrence of abortion and infertility in the pig farm. 2. The amount of explosive was increased from 250 kg to 1,100 kg from 23 Dec. 1996 to 28 Jan. 1997 and at the same time the distance between the spot of detonation and the pig farm got closer, from 200 m at the begining to 100 m at the last detonation. 3. Theoretical concussion and sound values were 0.66 kine and 89.39 ㏈, respectively, in the case of 100 m distance between the detonation spot and the pig farm. In conclusion, death of 675 piglets and 11 sows and infertility of 69 sows in the pig farm were assumed to be caused by the concussion or sound stress after detonation.
The response of the arc sensor using the welding current and/or welding voltage as its outputs has been obtained by the analysis and/or experiments of the static characteristics of arc sensor. But in order to improve the reliability of arc sensor, it is necessary to know its dynamic characteristics. So in this paper, it is presented the dynamic model of arc sensor including the power source, arc voltage, electrode burnoff rate, and wire feed rate. A numerical simulation of the dynamic model of arc sensor was implemented, computing the welding current with input of CTWD. The results of computer simulations and experiments of $CO_2$arc welding showed that a linear relationship between weaving center - weld line distance and current area difference was established. Additionally, a real-time weld seam tracking system interfaced with industrial welding robot was constructed, the result of the weld seam tracking experiment for weld line with an initial offset error of 5$^{\circ}$was good.
수백Km 정도의 섬과 섬 섬과 내륙을 해저광케이블로 연결하는 경우 일반 국가간의 500Km이상의 장거리의 중계기 증폭 시스템과 달리 송신단 및 수신단, 광케이블에 EDFA 기술을 적용하여 무중계 시스템을 설계할 수 있다. 중계기가 없음으로 해서 중계기에 공급하는 전력시스템, 동튜브가 내장된 해저케이블, 중계 증폭시 필요한 여기 파장공급용 Laser Diode등이 필요가 없어 고신뢰성 및 경제적인 시스템을 구성 할 수 있다. 그러나 중계 증폭을 하지 않는 만큼 저손실의 광케이블을 사용하여야 한다. 이러한 광증폭 제약 요소들을 고려하여 장거리 무중계 시스템을 고찰 하였다.
Although rock excavation is necessary for the effective utilization of urban space, most conventional rock excavation methods, including the blasting method, cause high noise and vibration. Meanwhile, if a high pressure waterjet system is applied to excavate underground spaces in urban areas, the public grievance can be reduced by low noise and vibration. In this study, an abrasive waterjet system is designed and developed to study the influence of various performance parameters such as jet pressure, nozzle traverse speed, stand-off distance, or abrasive feed rate on waterjet excavation performance in laboratory. Using the developed waterjet system, rock drilling characteristics are identified by measuring drilling depths as a function of the jet exposure time. The drilling depth linearly increases with increasing the jet exposure time(under 60sec). Rock cutting characteristics are also obtained with various jet pressures(1600~3200kg/$cm^2$) and nozzle traverse speeds(1.9~14.1mm/s): The cutting depth is nonlinearly related to the jet pressure and traverse speed. Indeed, the cutting depth increases with an increase in the jet pressure and a decrease in the nozzle traverse speed. This trend can be explained by energy transferring/loss mechanism.
국내 위성방송을 위한 DBS(Directcast Satellite) 수신용 헬리컬 어레이 안테나를 설계하였다. Coverage Area를 무주를 중심으로 서울까지 하기위해 안테나의 크기를 30cm로 하였고 어레이 소자의 개수는 168개로 하였다. 헬리컬 소자는 양호한 축비 특성과 안테나 높이를 고려하여 2회전과 $4^{\circ}$의 핏치각을 갖도록 하였다. 헬리컬소자의 어레이 열 간격은 $0.787{\lambda}$ 동열에서 헬리컬 간격은 $0.824{\lambda}$이며, 급전구조는 안테나의 높이를 줄이기 위해 방사형 도파관을 사용하였다. 설계 제작된 안테나의 측정된 복사특성은 축비를 제외하고 설계기준치를 만족하며 이론치에 거의 근접한 것으로 나타났다.
최근 전 세계적으로 ITC 기술을 이용한 항만 물류 분야의 경쟁력이 심화되는 추세를 보이고 있으며 현재 우리나라도 국가 전략적 차원에서 생산성 향상 및 서비스의 개선을 통한 고부가 가치를 획득하기 위한 u-Port(항만 물류) 사업이 진행 중이다. u-Port 사업에서 주된 기술 요소로 RFID/USN 기술이 사용되는데, 이 기술은 금속 환경에서의 태그 인식률이 좋지 않고, 인식거리가 짧다는 문제점들을 이유로 센서 노드들의 추가적인 배치를 통하여 관리를 하고 있다. 그러나 이러한 방법은 오차 범위가 크고 시스템 구축 초기비용 및 유지보수 비용이 많이 들어 U-Port용 시스템 구축에 여러 가지 문제점을 초래하고 있다. 이러한 문제점들을 개선하기 위하여 본 논문에서는 금속 태그 제작에 사용되는 급전의 문제점을 개선하고, 주변 환경 요소인 금속 물질로 인한 영향을 줄여 태그를 금속 물체에 부착 할 경우에도 장거리 인식율을 높일 수 있도록 인셋 급전을 적용한 산업용 RFID 적층형 마이크로스트립 패치 안테나를 설계하였다. 인셋 급전은 기존의 유도결합 급전을 이용한 구조와는 다르게 방사체와 급전선이 서로 분리되어 있지 않은 것이 가장 큰 특징이다. 이런 특징의 구조는 낮은 안테나 높이와 태그 칩에 임피던스 정합이 가능한 형태를 생산할 수 있게 해준다. 그러나 무조건 태그 안테나의 높이를 줄이면 안테나의 임피던스는 접지면과 방사체 사이의 기생 캐패시턴스가 증가하여 임피던스 정합의 어려움이 발생할 수 있으므로 단락 구조를 급전에 적용시켜 안테나의 임피던스를 인덕티브하게 만드는 방법을 이용하여 태그 안테나 설계 시 단점을 최소화하고 장점을 극대화 시켰다[1][2]. 이러한 기술적 요소들을 적용하여 본 논문에서는 마이크로스트립 패치 안테나를 변형된 형태로 설계하였고, 부착되는 금속물질의 영향을 줄이기 위해 인셋 급전을 이용하였으며, 안테나의 구성을 단일 층이 아닌 멀티층, 즉 방사체와 접지면 사이에 금속판을 삽입하여 특성저하를 감소시켰다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.