• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1157-1163
• /
• 2011

This study was conducted to determine the effect of the inclusion of different levels of ensiled cassava leaves (variety KM94) in the diets on performance and carcass characteristics of growing pigs in Vietnam. A total of 40 crossbreds pigs (Large White${\times}$Mong Cai, 20 males and 20 females) with an initial live weight of 23.5 kg (SD = 0.86) were randomly allocated to one of the four pens across 5 units. Four experimental diets were formulated for two growth periods, period 1 (60 days) for 20 to 50 kg and period 2 lasted 30 days, from 50 kg until slaughter. Four diets were formulated containing inclusion levels of ensiled cassava KM94 leaves diet of 0, 10, 15 and 20% in the DM. Diets were formulated based on previously determined ileal amino acid digestibility values of the KM94 products and were isonitrogenous and isocaloric on a metabolizable energy basis. Each pen of pigs was randomly assigned to one of the four dietary treatments. Dry matter intake and final weight tended to decreased with increasing levels of ensiled cassava KM94 leaves in the diet while there was a significant (p = 0.022) decrease in average daily gain. Protein depositions of the F1 pigs tended (p = 0.093) to decrease with increasing inclusion levels of ensiled cassava KM94 leaves. There was no significant difference in feed conversion ratio, carcass quality and fat gain between the groups of pigs. There were clear differences in feed costs among the experimental diets (p = 0.001) with increasing levels of ensiled cassava KM 94 leaves in the diet reducing feed costs. It was concluded that, in diets for growing pig, inclusion of ensiled cassava leaves reduces growth rate of pigs in Vietnam but increases profitability as measured by feed costs.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.55-61
• /
• 1985

In an attempt to compare the mash and pelleting costs, individual production costs of eash mash and pelleting are analyzed. For the analysis, Park's model (1982) are used. According to the results of the analysis, the following conclusions are made. 1. Total energy cost for pelleting is 4 times higher than that for mash feed production. 2. Labor cost for pelleting is 20 % higher than that of mash feed. 3. Capital requirements for pelleting feed mill is approximately 20 % higher than that for mash feed mill when feed mill size is 200 ton/day. 4. Total production cost for pelleting is from 30 % to 50 % higher than that for mash feed when mill size ranges from 100 ton/day to 400 ton/day.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.343-357
• /
• 1994

Current commercial dairy feed has various problems in low feed productivity, inadequate formulation and higher feeding cost due to excessive capital investment and non-specialized system for the end product. To solve those problems, 6 TMR terminal models were developed in this study. The developed TMR terminal system consists of TMR terminal, TMR main center and combined system linked TMR terminal and TMR main center. 15 TMR main center models were developed to support 10, 20, 30, 40, 50 TMR terminal(30 ton/day basis) by 3 different types, and evaluated for capital investment and operation cost by the analysis of the newly developed computer program. Optimum model size is analyzed and suggested for each model. Followings are summary of this study : 1. The capital investment costs of TMR main centers were 1,600 to 3,800 million won for type 1, 2,200 to 4,500 million won for type 2 and 2,200 to 4,800 million won for type 3. Also model MACE30 or bigger were justified as the economical models. 2. The feed production costs of TMR main center models were 3,166 to 4,824 won/ton for type 1, 3,816 to 6,182 won/ton for type 2 and 3,990 to 6,263 won/ton for type 3. So feed production cost range was 3,166 to 6,263 won/ton. 3. The bigger production capacity, the less TMR main center production cost. The feed production cost of the biggest model MACE50 was 62~65% of smallest model MACE10.

• Journal of the Korea Society for Simulation
• /
• v.29 no.4
• /
• pp.95-109
• /
• 2020

In this paper, an optimal manufacturing system design problem in an automotive body assembly lines is introduced when various costs such as equipment investment costs are considered. Meta-model methodology based on simulation results has been used for estimating the performances of the system such as production rate and work-in-process levels. The objective function is minimizing total cost which satisfies the target production rate. The investment costs such as robots, buffers, transportation equipment, and the inventory holding cost of work-in-process have been included in the objective function. Harmony search method has been used for optimization.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.214-225
• /
• 2018

Rice straw is the principal forage for Korean cattle. Limited supply of domestic forage forces Korea to depend on imported forage. Utilizing locally available domestic feed as an alternative would lead to self-sufficiency and stability in cattle farm management. Locally available feed can be utilized as forage. The challenge of collecting local feed has been overcome by machines that have been developed to harvest feed. Local feed can be completely consumed in the production regions, thus reducing transportation costs and increasing price competitiveness. Hitherto, studies have focused on feed technologies and price competitiveness, among other factors, while the substitution of forage has not been examined. This study conducts a quantitative analysis to estimate the extent to which local feed can replace existing forage. We find that local feed is cheaper, and abundantly available, and can thus replace high-quality forage.

• Journal of Biosystems Engineering
• /
• v.10 no.1
• /
• pp.69-75
• /
• 1985

For the purpose of estimating the operating cost for feed production, energy consumption, labor requirement, maintenance cost, and supplies and miscellaneous costs are analyzed and developed as mathematical models. Mathematical model for energy usage Consists of electrical energy, boiler fuel energy and vehicle fuel energy. The mathematil model for electrical energy usage for the swine and poultry feed mill and the complete pelleted feed mill are developed, based on the general model mill and the computer program for its design developed in Kansas State University (Park, 1982). Also, the boiler fuel energy consumption model and the vehicle fuel energy consumption model are developed by analyzing the boiler system and the vehicle operation in the warehouse. In order to develop a mathematical model for labor requirement, the data that Vosloh (1968, 1976) constructed for labor requirement in his model mill are used by assuming that his model mill is similar to this model, in terms of labor assignment standards. Maintenance and repair costs are obtained by assuming to be 5.5% of the total capital investment cost. Also, supplies and miscellaneous costs are estimated by using Vosloh's report and it is approximately 0.87 dollars per ton based on daily production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.4
• /
• pp.519-529
• /
• 2015

The aims of this study were to determine the effects of feeding medium-roasted soybean meal (SBM) and corn dried distiller's grains with solubles (CDDGS) in dairy cows on milk production and income over feed costs. A randomized complete block design experiment was conducted with 24 crossbred multiparous Holstein Friesian dairy cows in early- and mid-lactation. Four dietary treatments were as follows: basal diet without feed substitute (Control), 7.17% dry matter (DM) roasted SBM replaced for concentrate (R-SBM), 11.50% DM CDDGS replaced for concentrate (DDGS), and 3.58% DM roasted SBM plus 5.75% DM CDDGS replaced for concentrate (SB-DG). The roasted SBM was produced using a medium-heated treatment at $100^{\circ}C$ for 180 min. Dry matter intake was not affected by feeding high rumen undegradable protein (RUP) sources, but the replacement of roasted SBM and CDDGS for concentrate significantly improved (p<0.001) RUP intake (0.90, 0.86, and 0.88 kg/d corresponding to R-SBM, DDGS, and SB-DG) compared to the control (0.61 kg/d). Feeding roasted SBM and CDDGS alone or in combination had no significant effect on milk composition of dairy cows (p>0.05), whereas milk yield was significantly increased by 3.08 kg/d in the SB-DG group relative to the control group (p<0.01). Net income was meaningfully increased (p<0.05) from 4th week post feeding, the SB-DG group reached the greatest net income ($3.48/head/d) while the control group had the lowest value ($2.60/head/d). In conclusion, the use of CDDGS alone or in combination with medium-roasted SBM as substitute for concentrate in lactating dairy cattle diet led to improved milk production and net income over feed costs without affecting total dry matter intake and milk composition, while feeding medium-roasted SBM seemed to show intermediate values in almost parameters.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.930-935
• /
• 2023

This study aimed to analyze the structure of the value chain of the olive flounder aquaculture industry to increase the value of this industry. Based on the value chain theory, olive flounder aquaculture industry activities were classified as primary and support activities. The primary activities included seed production, fish production, producer distribution, consumer distribution, and consumption. The support activities were production infrastructure, organization and specialization, R&D, and government policy. A survey was conducted on the costs of seed and fish production in the primary activities to investigate the business structure, and the distribution structure was analyzed to examine distribution costs and margins. In the support activities, the recent trends in R&D and government policy were mainly examined, based on which, a measure to reduce costs and maximize profits was suggested. It is necessary to reduce costs across the production processes by improving seed quality and reducing labor, feed, and management costs, which are strongly associated with support activities. Therefore, lowering costs will be possible in the olive flounder aquaculture industry when R&D outcomes, such as species development, feed quality improvement, and aquaculture system development, are stably diffused and applied in tandem with government policy regarding the industry.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.237-249
• /
• 2013

Ultra-pure water (UPW), a highly treated water free of colloidal material and of a conductivity less than 0.06 ${\mu}S$, is an essential component required by modern industry. One of the methods for UPW production is the electrodialysis-ion exchange (ED/IE) system, in which the electrodialysis (ED) process is used as a preliminary demineralization step. The IE step can be replaced with electrodeionization (EDI) to decrease the volume of post-regeneration lyes. In this paper, the electrodialysis process carried out to relatively low diluate conductivity was investigated and the costs of UPW production were calculated. The optimal value of desalination degree by ED in the ED/IE and ED/EDI systems was estimated. UPW unit costs for integrated ED/IE and ED/EDI systems were compared to simple ion exchange and other methods for UPW production (RO-IE, RO-EDI). The minimal UPW unit costs in ED/EDI integrated system were estimated as $0.37/$m^3$ for feed TDS 600 mg/L and $0.36/$m^3$ for feed TDS 400 mg/L at 64 $m^3/h$ capacity, which was lower than in the comparable ED/IE integrated system ($0.42-0.44/$m^3$). The presented results suggest that an ED/EDI integrated system may be economically viable.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.565-583
• /
• 1993

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill model suitable for Korean farm size are developed. Also, capital requirement and operating costs of the model mill are analyzed. And these analyzed data are compared with the commercial feed production cost, in order to test whether the model mills are suitable or not in Korean dairy farm. Also optimum model is recommended depending on size of dairy farm. As a result, developed model mill(TMR) is very useful in Korea dairy farm not only reduce production cost up to 78% but also improve the qualities.