Comparison of Mash and Pelleting Feed Production Cost

분말사료와 Pallet 사료의 생산비 비교

  • Park, Kyung Kyu (Dept. of Agricultural Engineering, Coll. of Agric., Kyungpook Natl. Univ.) ;
  • Chung, D.S. (Dept. of Agricultural Engineering, Kansas State Univ.) ;
  • Behnke, K. (Dept. of Agricultural Engineering, Kansas State Univ.) ;
  • Kim, In Soo (Dept. of Gentic Engineering, Coll. of Natural Sci., Kyungpook Natl. Univ.)
  • 박경규 (경북대학교 농과대학 농공학과) ;
  • ;
  • ;
  • 김인수 (경북대학교 자연과학대학 유전공학과)
  • Published : 1985.04.30

Abstract

In an attempt to compare the mash and pelleting costs, individual production costs of eash mash and pelleting are analyzed. For the analysis, Park's model (1982) are used. According to the results of the analysis, the following conclusions are made. 1. Total energy cost for pelleting is 4 times higher than that for mash feed production. 2. Labor cost for pelleting is 20 % higher than that of mash feed. 3. Capital requirements for pelleting feed mill is approximately 20 % higher than that for mash feed mill when feed mill size is 200 ton/day. 4. Total production cost for pelleting is from 30 % to 50 % higher than that for mash feed when mill size ranges from 100 ton/day to 400 ton/day.

양계 및 양돈용 배합사료중 pellet 사료와 분말사료의 생산비를 비교하였다. 비교분석을 위하여 박(1982)이 개발한 모형을 이용하였으며 공장의 규모는 일산 80ton으로부터 400ton이었다. 분석된 결과를 요약하면 다음과 같다. 1. 동력비는 pellet 사료가 분말사료에 비해 4배가 높았다. 2. 노동비는 pellet 사료가 분말사료에 비해 20%가 높았다. 3. 일산 200ton 규모의 경우 투자비용은 pellet 사료가 20% 높았다. 4. 고정비 및 변동비를 고려한 총생산비를 공장규모가 100ton에서 400ton으로 커질 경우 pellet 사료가 분말사료에 비해 30%에서 50%로 증가되었다.

Keywords