• Asian-Australasian Journal of Animal Sciences
• /
• 제24권8호
• /
• pp.1157-1163
• /
• 2011

This study was conducted to determine the effect of the inclusion of different levels of ensiled cassava leaves (variety KM94) in the diets on performance and carcass characteristics of growing pigs in Vietnam. A total of 40 crossbreds pigs (Large White${\times}$Mong Cai, 20 males and 20 females) with an initial live weight of 23.5 kg (SD = 0.86) were randomly allocated to one of the four pens across 5 units. Four experimental diets were formulated for two growth periods, period 1 (60 days) for 20 to 50 kg and period 2 lasted 30 days, from 50 kg until slaughter. Four diets were formulated containing inclusion levels of ensiled cassava KM94 leaves diet of 0, 10, 15 and 20% in the DM. Diets were formulated based on previously determined ileal amino acid digestibility values of the KM94 products and were isonitrogenous and isocaloric on a metabolizable energy basis. Each pen of pigs was randomly assigned to one of the four dietary treatments. Dry matter intake and final weight tended to decreased with increasing levels of ensiled cassava KM94 leaves in the diet while there was a significant (p = 0.022) decrease in average daily gain. Protein depositions of the F1 pigs tended (p = 0.093) to decrease with increasing inclusion levels of ensiled cassava KM94 leaves. There was no significant difference in feed conversion ratio, carcass quality and fat gain between the groups of pigs. There were clear differences in feed costs among the experimental diets (p = 0.001) with increasing levels of ensiled cassava KM 94 leaves in the diet reducing feed costs. It was concluded that, in diets for growing pig, inclusion of ensiled cassava leaves reduces growth rate of pigs in Vietnam but increases profitability as measured by feed costs.

• Current Research on Agriculture and Life Sciences
• /
• 제3권
• /
• pp.55-61
• /
• 1985

양계 및 양돈용 배합사료중 pellet 사료와 분말사료의 생산비를 비교하였다. 비교분석을 위하여 박(1982)이 개발한 모형을 이용하였으며 공장의 규모는 일산 80ton으로부터 400ton이었다. 분석된 결과를 요약하면 다음과 같다. 1. 동력비는 pellet 사료가 분말사료에 비해 4배가 높았다. 2. 노동비는 pellet 사료가 분말사료에 비해 20%가 높았다. 3. 일산 200ton 규모의 경우 투자비용은 pellet 사료가 20% 높았다. 4. 고정비 및 변동비를 고려한 총생산비를 공장규모가 100ton에서 400ton으로 커질 경우 pellet 사료가 분말사료에 비해 30%에서 50%로 증가되었다.

• Journal of Biosystems Engineering
• /
• 제19권4호
• /
• pp.343-357
• /
• 1994

Current commercial dairy feed has various problems in low feed productivity, inadequate formulation and higher feeding cost due to excessive capital investment and non-specialized system for the end product. To solve those problems, 6 TMR terminal models were developed in this study. The developed TMR terminal system consists of TMR terminal, TMR main center and combined system linked TMR terminal and TMR main center. 15 TMR main center models were developed to support 10, 20, 30, 40, 50 TMR terminal(30 ton/day basis) by 3 different types, and evaluated for capital investment and operation cost by the analysis of the newly developed computer program. Optimum model size is analyzed and suggested for each model. Followings are summary of this study : 1. The capital investment costs of TMR main centers were 1,600 to 3,800 million won for type 1, 2,200 to 4,500 million won for type 2 and 2,200 to 4,800 million won for type 3. Also model MACE30 or bigger were justified as the economical models. 2. The feed production costs of TMR main center models were 3,166 to 4,824 won/ton for type 1, 3,816 to 6,182 won/ton for type 2 and 3,990 to 6,263 won/ton for type 3. So feed production cost range was 3,166 to 6,263 won/ton. 3. The bigger production capacity, the less TMR main center production cost. The feed production cost of the biggest model MACE50 was 62~65% of smallest model MACE10.

• 한국시뮬레이션학회논문지
• /
• 제29권4호
• /
• pp.95-109
• /
• 2020

이 논문에서는 자동차 차체 조립라인과 같은 제조시스템을 설계할 때, 설비투자비용과 같은 다양한 비용요소를 고려하여 최적 배치안을 결정하는 문제를 다룬다. 시스템의 성능 평가에 필요한 생산율 재공품 재고 수준을 추정하기 위해서는 시뮬레이션 실험 결과를 기반으로 하는 메타모델 방법론을 사용하였다. 최적화 문제의 목적함수는 목표생산율을 만족시키는 최소비용으로 정하였는데, 비용요소로는 로봇, 버퍼, 운송장비에 대한 투자비용을 고려하였고, 운영비용으로는 재공품 재고비용을 포함시켰다. 최적화 문제를 풀기 위해서는 하모니 탐색방법론을 사용하였다.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.214-225
• /
• 2018

Rice straw is the principal forage for Korean cattle. Limited supply of domestic forage forces Korea to depend on imported forage. Utilizing locally available domestic feed as an alternative would lead to self-sufficiency and stability in cattle farm management. Locally available feed can be utilized as forage. The challenge of collecting local feed has been overcome by machines that have been developed to harvest feed. Local feed can be completely consumed in the production regions, thus reducing transportation costs and increasing price competitiveness. Hitherto, studies have focused on feed technologies and price competitiveness, among other factors, while the substitution of forage has not been examined. This study conducts a quantitative analysis to estimate the extent to which local feed can replace existing forage. We find that local feed is cheaper, and abundantly available, and can thus replace high-quality forage.

• Journal of Biosystems Engineering
• /
• 제10권1호
• /
• pp.69-75
• /
• 1985

배합사료생산(配合飼料生産)에 소요(所要)되는 운전비용(運轉費用)을 추정(推定)하기 위(爲)하여 소요(所要)에너지, 소요노동력(所要努動力), 유지(維持) 및 수리비(修理費)를 분석(分析)하여 공장규모(工場規模) 및 사료생산종류(飼料生産種類)에 따른 수학적모형을 개발(開發)하였다. 에너지비용(費用)은 전기비용(電氣費用)과 연료비용(燃料費用)으로 구분(區分)하였으며 소요노동력(所要努動力)은 생산노동력(生産努動力), 관리자노동력(管理者努動力) 그리고 유지(維持) 및 수리노동력(修理努動力)으로 구분(區分)하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권4호
• /
• pp.519-529
• /
• 2015

The aims of this study were to determine the effects of feeding medium-roasted soybean meal (SBM) and corn dried distiller's grains with solubles (CDDGS) in dairy cows on milk production and income over feed costs. A randomized complete block design experiment was conducted with 24 crossbred multiparous Holstein Friesian dairy cows in early- and mid-lactation. Four dietary treatments were as follows: basal diet without feed substitute (Control), 7.17% dry matter (DM) roasted SBM replaced for concentrate (R-SBM), 11.50% DM CDDGS replaced for concentrate (DDGS), and 3.58% DM roasted SBM plus 5.75% DM CDDGS replaced for concentrate (SB-DG). The roasted SBM was produced using a medium-heated treatment at $100^{\circ}C$ for 180 min. Dry matter intake was not affected by feeding high rumen undegradable protein (RUP) sources, but the replacement of roasted SBM and CDDGS for concentrate significantly improved (p<0.001) RUP intake (0.90, 0.86, and 0.88 kg/d corresponding to R-SBM, DDGS, and SB-DG) compared to the control (0.61 kg/d). Feeding roasted SBM and CDDGS alone or in combination had no significant effect on milk composition of dairy cows (p>0.05), whereas milk yield was significantly increased by 3.08 kg/d in the SB-DG group relative to the control group (p<0.01). Net income was meaningfully increased (p<0.05) from 4th week post feeding, the SB-DG group reached the greatest net income ($3.48/head/d) while the control group had the lowest value ($2.60/head/d). In conclusion, the use of CDDGS alone or in combination with medium-roasted SBM as substitute for concentrate in lactating dairy cattle diet led to improved milk production and net income over feed costs without affecting total dry matter intake and milk composition, while feeding medium-roasted SBM seemed to show intermediate values in almost parameters.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.930-935
• /
• 2023

This study aimed to analyze the structure of the value chain of the olive flounder aquaculture industry to increase the value of this industry. Based on the value chain theory, olive flounder aquaculture industry activities were classified as primary and support activities. The primary activities included seed production, fish production, producer distribution, consumer distribution, and consumption. The support activities were production infrastructure, organization and specialization, R&D, and government policy. A survey was conducted on the costs of seed and fish production in the primary activities to investigate the business structure, and the distribution structure was analyzed to examine distribution costs and margins. In the support activities, the recent trends in R&D and government policy were mainly examined, based on which, a measure to reduce costs and maximize profits was suggested. It is necessary to reduce costs across the production processes by improving seed quality and reducing labor, feed, and management costs, which are strongly associated with support activities. Therefore, lowering costs will be possible in the olive flounder aquaculture industry when R&D outcomes, such as species development, feed quality improvement, and aquaculture system development, are stably diffused and applied in tandem with government policy regarding the industry.

• Membrane and Water Treatment
• /
• 제4권4호
• /
• pp.237-249
• /
• 2013

Ultra-pure water (UPW), a highly treated water free of colloidal material and of a conductivity less than 0.06 ${\mu}S$, is an essential component required by modern industry. One of the methods for UPW production is the electrodialysis-ion exchange (ED/IE) system, in which the electrodialysis (ED) process is used as a preliminary demineralization step. The IE step can be replaced with electrodeionization (EDI) to decrease the volume of post-regeneration lyes. In this paper, the electrodialysis process carried out to relatively low diluate conductivity was investigated and the costs of UPW production were calculated. The optimal value of desalination degree by ED in the ED/IE and ED/EDI systems was estimated. UPW unit costs for integrated ED/IE and ED/EDI systems were compared to simple ion exchange and other methods for UPW production (RO-IE, RO-EDI). The minimal UPW unit costs in ED/EDI integrated system were estimated as $0.37/$m^3$ for feed TDS 600 mg/L and $0.36/$m^3$ for feed TDS 400 mg/L at 64 $m^3/h$ capacity, which was lower than in the comparable ED/IE integrated system ($0.42-0.44/$m^3$). The presented results suggest that an ED/EDI integrated system may be economically viable.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.565-583
• /
• 1993

In order to reduce the production cost and improve the quality of dairy feed, several dairy feed mill model suitable for Korean farm size are developed. Also, capital requirement and operating costs of the model mill are analyzed. And these analyzed data are compared with the commercial feed production cost, in order to test whether the model mills are suitable or not in Korean dairy farm. Also optimum model is recommended depending on size of dairy farm. As a result, developed model mill(TMR) is very useful in Korea dairy farm not only reduce production cost up to 78% but also improve the qualities.