• 한국해양학회지:바다
• /
• 제20권4호
• /
• pp.159-168
• /
• 2015

한국 남서해 연안의 도암만에서 44개 표층퇴적물을 채취하여 총유기탄소(TOC), 총질소(TN) 및 중금속(Al, Fe, Mn, Cr, Cu, Ni, Pb, Zn)을 분석하였으며, 11개 시료에 대해서는 화학적 존재형태별 분석을 병행하였다. TOC(0.32~3.10%), TN(0.03~0.26%)은 주변 해역의 평균 수준이었고, C/N 비(7.9~11.9)에 근거할 때 육상기원 유기물의 영향이 반영된 일부 지역이 구분되었다. 중금속 함량은 대부분의 정점에서 해양퇴적물 주의기준(TEL) 이하였고, 화학적 존재형태별 함량은 광물격자부분에서 Cr, Cu, Ni 등이, 비광물격자부분에서 Mn, Pb가 총량의 절반을 상회하였다. 연구지역의 중금속 배경농도를 누적빈도곡선과 선형회귀분석에 의해 추정한 결과 Cu=11.8, Ni=23.1, Pb=26.8, Zn=76.6, Cr=56.7, Mn=585 mg/kg으로 계산되었으며, 이를 바탕으로 한 농축지수($I_{geo}$)에 근거해 국지적인 Mn 농축의 징후를 확인하였다. 그러나 농축지수와 존재형태비를 고려할 때 Zn, Pb도 환경변화에 따른 용출 가능성이 추정되었다.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.308-312
• /
• 2007

Chromium oxide thin films have been deposited on silicon substrates using a tabletop 9kJ mathertyped plasma focus (PF) device. Before deposition, pinch behavior with gas pressure was observed. Strength of pinches was increased with increasing working pressure. Deposition was performed at room temperature as a function of working pressure between 50 and 1000 mTorr. Composition and surface morphology of the films were analyzed by Auger Electron Spectroscopy and Scanning Electron Microscope, respectively. Growth rates of the films were decreased with pressure. The oxide films were polycrystalline containing some impurities, Cu, Fe, C and revealed finer grain structure at lower pressure.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.158-165
• /
• 1994

Cu-Cr alloy thin film requires good quality of etching be used for TAB technology. The etched cross sec-tion was clean enough when the etching was performed in 0.1M $FeCl_3$ solution at $50^{\circ}C$. The etching rate was increased with the amount of $KMnO_4$. For enhanced profile of cross section and rate, the spray etchning was found to be superior compared to the immersion etching. A series of experiments were performed to improve the uniformity of the current distribution in electrodeposition onto the substrate with lithographic patterns. Copper was electrodeposited from quiescent-solution, paddle-agitated-solution, and air-bubbled-solution to in-vestigate the effect of the fluid flow. The thickness profile of the specimen measured by profilmetry has the non uniformity at feature scale in quiescent-solution, because of the longitudinal vortex roll caused by the natural convection. However, uniform thickness profile was achieved in paddle-agitated or air bubbled solu-tion.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.122-126
• /
• 2011

A new phosphorescent cyclometalated heteroleptic iridium (III) complex with an ancillary ligand of 4-azacrownpicolinate was prepared and its metal ion selective phosphorescent chemosensing behavior was investigated. The new iridium (III) complex exhibits notable phosphorescence quenching for Hg2+ in aqueous 50% acetonitrile solution with respect to the selective phosphorescent detection of various metal ions including $Li^+,Na^+,K^+,Cs^+,Mg^{2+},Ca^{2+},Ba^{2+},Fe^{2+},Ni^{2+},Cu^{2+},Zn^{2+},Ag^+,Pb^{2+},Cd^{2+},Cr^{2+},Cr^{3+}$ and $Hg^{2+}$. The phosphorescence quenching for $Hg^{2+}$ increased linearly with increasing concentration of $Hg^{2+}$ in the range of $10{\mu}M-700{\mu}M$ even in the presence of other metal ions, except for $Cu^{2+}$. Consequently, the new iridium (III) complex has the potential to be utilized for the determination of parts per million levels of $Hg^{2+}$ in aqueous acetonitrile media.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.677-682
• /
• 2003

SiC nanowires were synthesized by carbothermal reduction using metal catalysts. Synthesized nanowires had mean diameters of 30∼50 nm and several $\mu\textrm{m}$ length. The kind of catalysts affects form of SiC nanowire because of difference of growth mechanisms. These differences were made by catalyst's physical property and relative activities to the source gas. Ni acted a conventional catalyst of VLS growth mechanism. But, Case of Fe, SiC nanowire was grown by stable VLS growth mechanism without relation of growth conditions. SiC nanowire was grown by two step growth model using Cr catalyst. Conversion ratios to the SiC nanowire were increased with growth conditions. Case of Cr, conversion ratio was about 45% that was higher than other catalyst used. This high conversion ratio was obtained by the addition VS growth to radial direction on the as-grown nanowires.

• 한국광물학회지
• /
• 제23권4호
• /
• pp.281-295
• /
• 2010

비오염토양, 폐광산 주변토양, 산업단지 주변토양을 채취하여 X-선 회절분석, pH, 전기전도도, 양이온교환능력, 작열감량, 산화철 산화망간 함량, 중금속 함량 및 중금속 존재형태와 토양대자율의 상관관계를 파악하였다. 시료의 X-선회절분석 정량분석결과 비오염지역 토양에서는 모암에 따라 다양한 광물이 분포하고 있지만, 적철석과 자철석은 거의 관찰되지 않았다. 폐광산 주변토양은 폐광석, 광물찌꺼기 등의 영향으로 적철석이 많이 확인되었고, 일부 시료에서는 자철석도 존재하였다. 산업단지 주변시료에서는 방해석과 철백운석 등의 탄산염 광물들이 대부분의 시료에서 확인되었다. 중금속의 존재형태를 파악하기 위한 연속추출 실험 결과, 폐광산 주변지역 토양시료에서 철, 망간, 중금속 원소들은 reducible, oxidizable, residual 단계별 추출 형태로 80% 이상, 산업단지 주변시료에서는 50% 이상 존재하였다. 산업단지 주변시료의 경우, 탄산염 광물의 영향으로 carbonate 형태가 높게 나타났다. 왕수로 추출된 철, 망간, 비소, 아연 함량은 산화철/산화망간 형태를 지시하는 dithionite-citrate-bicarbonate (DCB) 용출 함량과 매우 밀접한 정의 상관관계를 보여주었다. 철과 비소는 각각 왕수추출함량의 54%, 58%가 산화철/산화망간 형태과 함께 거동하는 것으로 나타났다. 대자율은 $0.005{\sim}2.131{\times}10^{-6}m^3kg^{-1}$의 범위로서, 시료 내에 적철석, 자철석 등 산화철 광물이 존재할 경우 대자율이 높게 측정되었다. 토양 내 중금속 함량과 대자율의 상관관계를 살펴본 결과 철 (r=0.608, p<0.01), 망간(r=0.615, p<0.01)과 유의한 정의 상관관계를 보였으며, 카드뮴(r=0.544, p<0.05), 크롬(r=0.714, p<0.01), 니켈(r=0.645, p<0.05), 납(r=0.703, p<0.01), 아연(r=0.496, p<0.01) 등의 중금속 원소와도 유의한 정의 상관관계를 보였다. 철, 망간 및 중금속원소들 간의 상관관계를 살펴본 결과, 왕수로 용출된 철, 망간 함량과 카드뮴, 크롬, 구리, 니켈, 아연 등의 중금속 함량이 정의 상관관계를 보이고 있다. 또한 산화철 및 산화망간 함량은 비소 및 니켈 함량과 밀접한 상관성이 있는 것으로 나타났다. 이는 비소와 니켈은 산화철 산화망간에 흡착되어 함께 거동함을 암시한다.

• 열처리공학회지
• /
• 제8권4호
• /
• pp.255-265
• /
• 1995

Stainless steel type 304L has been nitrided in the low pressure (600Pa) and high nitrogen (80% $N_2$+20% $H_2$) environment for 5 hours by the square-wave-pulsed-d.c. plasma as a function of temperature $400{\sim}550^{\circ}C$ and pulsation. At the lower temperature range of $400{\sim}500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period. "S-phase" has been developed in the form of thin nitrided surface layer which has many cracks, leading to be nearly impossible for the industrial anti-wear and anti-corrosion applications. At the higher temperature up to $550^{\circ}C$ with the increasing ratio of the pulse duration to pulse period up to $50{\mu}s/100{\mu}s$, the nitrided layer, whose growth rate has increased also, has been composed mainly of CrN and $Fe_4N$ phases and has become thick, uniform and nearly crack-free.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.72-77
• /
• 1998

액체금속로 노심재료로 사용되고 있는 HT9강의 열처리에 따른 미세조직 변화를 관찰하였다. 열간압연상태에서의 조직은 마르덴사이트, $\delta$-페라이트, 잔류 오스테나이트, 그리고 탄화물로 이루어져 있다. 잔류 오스테나이트는 austenitization하여도 그 함량은 감소하지만 완전히 제거되지는 않았으나, tempering후에는 잔류하지 않았다. 오스테나이트 입자크기는 austenitization 온도가 증가함에 따라 성장하여 11005$^{\circ}C$에서는 약 42$\mu\textrm{m}$였다. Austenitization 온도 증가에 따라 탄화물의 평균 크기 및 평균 면적 분율은 크게 감소하고 있었다. 50$0^{\circ}C$에서 tempering한 경우에는 Fe-rich 탄화물이 석출하였으나, tempering 온도가 증가하면 Cr-rich M$_2$$_3$C$_{6}$ 탄화물이 석출하고 있었다. Austenitization 상태에서는 100$0^{\circ}C$ 까지는 탄화물의 분해가 일어나 경도값이 증가하나 100$0^{\circ}C$ 이상에서는 일정한 경도값을 나타내었다. Tempering한 시편에서는 탄화물의 석출과 전위의 회복으로 인해 tempering 온도가 증가함에 따라 경도값이 급격히 감소하였다.

• 환경영향평가
• /
• 제12권2호
• /
• pp.99-108
• /
• 2003

We collected and analyzed PM10 samples to account for the characteristics of heavy metallic elements for yellow sand and non-yellow sand during springtime of 2002 at Busan, The mean PM10 mass concentration for springtime of 2002 was $219.82{\mu}g/m^3$ with the maximum $787.50{\mu}g/m^3$ and the minimum $19.44{\mu}g/m^3$. The mean concentration of metallic elements contained in PM10 are shown as follows : Si>Ca>Fe>Al>Na, respectively. The ratio of mean PM10 mass concentration for yellow sand($362.7{\mu}g/m^3$) to that for non-yellow sand($48.3{\mu}g/m^3$) was 7.5, the significant positive correlation (P<0.05) was found between yellow sand and non-yellow sand. The metallic elements concentration ratios of yellow sand to the non-yellow sand were over 10 times for Al, Ca, Mg, 4~8 times for Fe, Si, Mn. But the concentration of Na, Cu, Zn for non-yellow sand was higher than those of yellow sand. The crustal enrichment factor of Cd, Cu, Pb, Zn, Cr, K, Mn, Na, Ni for yellow sand was higher that of non-yellow sand over 10 times, and concentration rate of soil particles of yellow sand was increased 2.3 times that of nonyellow sand.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.389-395
• /
• 2000

A natural colorants was extracted from cherry by 10wt% aqueous acetic acid solution as an extractant. Silk and cotton fabrics were dyed with the cherry extract in the temperature range of $40-80^\circ{C}$ and for the time range of 30-60min. by pre- and post-mordanting with various mordants, their dyeability and fastness were investigated. The natural cherry extract prepared in this study has a maximum absorbance at 520nm. It was found that the optimum dyeing temperature and time were $40^\circ{C}$ and 50min, respectively. The pre-mordanting method was more effective than post-mordanting. All mordants except $SnCl_2\cdot{2H}_2O\;and\;FeSO_4\cdot{7H}_2O$ were effective for silk fabrics. However, the dyeability on cotton fabrics increased in the order of $CrK(SO_4)_2\cdot{12H_2O>(CH_3COO)_2Cu\cdot{H}_2O>CuSO_4\cdot{5H}_2O>AlK(SO_4)_2\cdot{12H}_2O>FeSO_4\cdot{7H}_2O>SnCl_2\cdot{2H}_2O$ among the mordants used in this study Fastness(light, water, washing, perpspiration fastness) on the silk and cotton fabrics increased with using mordants. The post-mordanting using mordant$(CH_3COO)_2Cu\cdot{H}_2O$ among the various mordants in this study gave the best fastness.