• 제목/요약/키워드: Fe-Cr

검색결과 1,710건 처리시간 0.027초

Modified 9Cr-1Mo 강의 열화도 평가 (The Evaluation of Materials Degradation in Modified 9Cr-1Mo Steel)

  • 현양기;이재도
    • 연구논문집
    • /
    • 통권31호
    • /
    • pp.157-163
    • /
    • 2001
  • Evolution of microstructure due to service exposure to high temperature has a strong effect performance of heat resistant steels. In case of modified 9Cr-1Mo steels, precipitation of $Fe_2Mo$-type laves phases and coarcening of $M_23C_6$-type carbides is the primary cause of degradation of mechanical properties such as creep resistance, tensile strength and toughness. Creep tests have been carried out on pre-aging mod. 9Cr-1Mo steels to examine the effect of pre-aging and stress on the creep strength. Based on the results, a nondestructive procedure, where electrochemical technique that quantitatively detect laves phases and $M_23C_6$-type carbides in a material is used, has been proposed to evaluate a residual creep life of mod. 9Cr-1Mo steels.

  • PDF

Effect of gadolinium and boron addition on the texture development and magnetic properties of 23Cr-10NiCu duplex stainless steels

  • Baik, Youl;Kang, Bo Kyeong;Choi, Yong;Woo, Wan Chuck
    • Nuclear Engineering and Technology
    • /
    • 제53권6호
    • /
    • pp.1887-1892
    • /
    • 2021
  • The effect of gadolinium and boron on the texture development and magnetic properties of the texture controlled 23Cr-10NiCu duplex stainless steels were studied to develop a high performance neutron and electromagnetic shielding material. The 23Cr-10NiCu base alloy is composed of 60% of austenite and 40% of ferrite, whereas, the 23Cr-10NiCu-0.5Gd-0.8B modified alloy is composed of 66% of austenite, 27% of ferrite and 7% of CrFeB intermetallic compounds. The gadolinium and boron addition to the 23Cr-10NiCu base alloy increased mechanical properties. Microstructure observation showed that the small addition of 0.5 wt% gadolinium and 0.8 wt% boron to the alloy retarded to form texture at the same hot rolling conditions, and improved the maximum magnetism, residual magnetism and coercive force about 3%, 122% and 120%, respectively.

우리나라 일부지역의 입자상 물질 농도에 대한 연구 (A study of particulate matters in Korea)

  • 손부순;공미연;박종안;양원호;김종오
    • 환경위생공학
    • /
    • 제18권4호
    • /
    • pp.24-35
    • /
    • 2003
  • Recent epidemiologic studies revealed that the concentration of air pollutants and fine particulated matter have some effects on health status and are associated with increased mortality and morbidity. The purpose of this study was to characterize background mass concentration of fine particle (PM2.5) and metallic composition from September 2001 to August 2002 in comparison with a medium city, Asan and metropolitan city, Seoul. Conclusively, proper management for fine particles was required in a medium city, Asan, considering the concentrations of metallic elements in fine particles in Asan were relatively higher than those in Seoul. The results were as followed. 1. Average mass concentrations of fine particles in Asan and Seoul were 37.70(${\pm}18.41{\;}{\mu}g/\textrm{m}^3$) and 5.83(${\pm}38.50$) ${\mu}g/\textrm{m}^3$, respectively. When the weather conditions were classified as normal and yellow-sand, measured average mass concentrations of fine particles in yellow-sand weather condition was significantly higher than those of normal weather condition in both cities (p<0.05). 2. Depending on seasons, measured average mass concentrations of fine particles in Asan and Seoul in spring were 47.76(${\pm}19.07$) ${\mu}g/\textrm{m}^3$m and 61.53 (${\pm}4.37$) ${\mu}g/\textrm{m}^3$, respectively. In summer, the average mass concentrations of fine particles in Asan and Seoul were 29.44(${\pm}9.85$) ${\mu}g/\textrm{m}^3$ and 25.42(${\pm}8.10$) ${\mu}g/\textrm{m}^3$, respectively. Especially, the concentration was the highest in spring and the lowest in summer among four seasons. 3. Average concentrations of manganese(Mn), iron(Fe), chromium(Cr), cadmium(Cd), lead(Pb) and silicon(Si) in fine particles in Asan were significantly higher in Seoul (p<0.05). Average concentration of Si in fine particle in Asan was statistically higher than that of Seoul during yellow -sand condition (p<0.05). 4. Considering the characterization of four seasons, average Pb concentration of fine particle in Asan is significantly higher than that of Seoul in spring(p<0.01). In summer, average Mn and Cr concentrations of fine particle in Asan is higher than those of Seoul (p<0.05). Average Mn, Fe. Cr and Si concentrations in fall (p<0.05), and average Mn, Fe, Cr, Pb, and Si concentrations in winter (p<0.05) in Asan were higher than those of Seoul, respectively. 5. Mass concentrations of each Mn, Fe, Cd and Si in fine particles were significantly correlated with both cities. In normal weather condition, Mn, Cu and Si concentrations are statistically significant in Asan, while Mn, Fe, Cu and Si concentrations are statistically significant in Seoul. Mn, Fe and Si concentrations in both cities were statistically significant during yellow-sand weather.

재활용 플라스틱 제품 중 고무대야의 중금속 노출량 평가 (Heavy metal exposure assessment of recycled plastic buckets)

  • 김민선;김우일;신선경;강영렬;조윤아;정성경;김나;연진모;이지영
    • 분석과학
    • /
    • 제26권1호
    • /
    • pp.67-72
    • /
    • 2013
  • 본 연구는 폐플라스틱 재활용 제품(재활용 고무대야)의 올바른 사용을 유도하기위한 기초자료로 활용하고자 수행하였다. 재활용 고무대야의 중금속(Cd, Cr, Cu, Fe, Hg, Pb, Zn) 함량과 용출량을 확인하고 김치제조 시나리오에 따라 배추 시료를 분석하여 재활용 고무대야에서 제조한 김치를 섭취할 경우의 노출량을 산정하였다. 분석결과 재활용 고무대야의 중금속함량은 Fe이 가장 높게 나왔으며 그 다음으로 Cu, Zn, Pb의 함량이 높았다. 16개 시료 중 1 개 시료가 식품공전 기구 및 용기포장 일반기준(Cd, $Cr^{6+}$, Pb, Hg 함량합계 100 mg/kg 이하)을 초과하였다. 용출시험에서는 Fe, Pb, Zn이 검출되었으나 식품공전 합성수지제 용출규격(Pb 1.0 mg/L 이하) 미만이었다. 재활용 고무대야에서 절인 배추시료의 중금속 함량 분석결과 Fe, Pb, Zn이 검출 되었으나 노출량을 산정한 결과 일일최대 섭취한계량 미만이었다. 재활용 고무대야의 시나리오에 따른 노출량 시험결과 유해물질의 함량은 일일 최대 섭취량 미만으로 나타났으나 함량분석결과 기준을 초과한 시료가 있었다. 또한 온도, 시간 등 조건변화에 따른 추가용출 가능성을 배제할 수 없으므로 식품 제조용기로 사용하는 것은 주의가 필요하다.

Nb 첨가 핵연료피복관용 Zr 신합금의 부식특성 연구 (Study on Corrosion Characteristic of New Nb-containing Zr based Alloys for Fuel cladding)

  • 최병권;하승원;정용환
    • 한국재료학회지
    • /
    • 제11권5호
    • /
    • pp.405-412
    • /
    • 2001
  • 본 연구에서는 $360^{\circ}C$ 물 및 $360^{\circ}C$, 70ppm LiOH 수용액 분위기의 static autoclave를 이용하여 새롭게 개발한 Zr 신합금 (Zr-0.4Nb-0.8Sn-xFeCrMn, Zr-0.2Nb-1.1Sn-xFeCrMn, Zr-1.0Nb-xFeCu) 의 부식 특성을 평가하였다. 합금의 미세구조를 광학현미경과 TEM을 이용하여 관찰하였고, 부식시험 중에 생성된 산화막은 SEM과 XRD를 이용하여 단면 및 결정구조를 조사하였다. 부식시험 결과, 3종의 합금 모두 $360^{\circ}C$ 물 분위기보다 $360^{\circ}C$, 70ppm LiOH 수용액 분위기에서의 부식저항성이 감소하였으며 특히, High Nb 합금의 경우 급격한 가속 부식현상을 나타내었다. 합금원소 첨가량과 관련하여 Nb의 함량을 고용도 이내로 줄이고 Sn을 적절히 첨가한 조성의 합금이 Sn을 첨가하지 않고 고용도 이상의 Nb을 가진 합금보다 우수한 부식저항성을 나타내었다. 또한 최종열처리가 부식에 미치는 영향의 경우에, 완전재결정 조직의 합금이 부분재결정 조직을 가진 합금보다 부식저항성이 감소되었는데 이는 기지조직에서 석출하늘 제 2상의 크기 및 분포에 의한 영향으로 사료된다.

  • PDF

Na-A형 제올라이트의 합성 및 중금속에 대한 흡착능 (Synthesis of Na-A Type Zeolite and Its Ability to Adsorb Heavy Metals)

  • 채수천;장영남;배인국;이성기;류경원
    • 한국광물학회지
    • /
    • 제21권1호
    • /
    • pp.37-44
    • /
    • 2008
  • 본 연구는 마포소각장에서 발생된 용융슬래그로부터 Na-A형 제올라이트를 합성하여 환경 저감재로 재활용키 위한 목적에서 수행되었다. 초기물질로 사용된 용융슬래그는 용제(flux)로 사용된 Fe 성분(19.6% of $Fe_2O_3$, and 18.9% of FeO)이 비교적 높기는 하지만, 상대적으로 제올라이트의 주요 성분인 $SiO_2$, $Al_2O_3$$Na_2O$가 각각 26.6%, 10.9% 및 2.7% 함유되어 제올라이트의 합성에 유리한 조성을 가지고 있다. 제올라이트의 수열합성은 $80^{\circ}C$에서 수행되었으며, $SiO_2/Al_2O_3\;=\;0.80{\sim}1.96$인 넓은 범위의 화학조성에서 Na-A형 제올라이트가 합성되는 것을 확인하였다. 제올라이트의 양이온 교환 능력은 10 h 이상의 합성시간에서 일정하게 거의 220 cmol/kg인 것으로 측정되었다. 합성된 제올라이트의 중금속 (As, Cr, Cd, Cu, Mn 및 Pb)에 대한 흡착능을 측정한 결과, As 및 Cr을 제외한 모든 중금속에서 높은 흡착율을 보였다. As와 Cr은 Eh-pH분석을 통해 각각 $HAsO_4^{2-}$$CrO_4^{2-}$인 이온상으로 존재하고 있음을 확인하였다. As와 Cr에 대한 제올라이트의 흡착률이 낮은 것은 이들 이온상들의 크기가 Na-A형 제올라이트의 pore size ($4\;{\AA}$)보다 상대적으로 큰 유효 이온반경($4\;{\AA}$, 직경 $8\;{\AA}$)을 가지고 있기 때문인 것으로 결론지었다.

전이금속원소들이 첨가된 나노 티타니아 졸 및 코팅막 제조 (Preparation of Nano Titania Sols and Thin Films added with Transition Metal Elements)

  • 이강;이남희;신승한;이희균;김선재
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.634-641
    • /
    • 2004
  • The photocatalytic performance of $TiO_2$ thin films coated on porous alumina balls using various aqueous $TiOCl_2$ solutions as starting precursors, to which 1.0 $mol\%$ transition metal ($Ni^{2+},\;Cr^{3+},\;Fe^{3+},\;Nb^{3+},\;and\;V^{5+}$) chlorides had been already added, has been investigated, together with characterizations for $TiO_2$ sols synthesized simultaneously in the same autoclave through hydrothermal method. The synthesized $TiO_2$ sols were all formed with an anatase phase, and their particle size was between several nm and 30 nm showing ${\zeta}-potential$ of $-25{\sim}-35$ mV, being maintained stable for over 6 months. However, the $TiO_2$ sol added with Cr had a much lower value of -potential and larger particle sizes. The coated $TiO_2$ thin films had almost the same shape and size as those of the sol. The pure $TiO_2$ sol showed the highest optical absorption in the ultraviolet light region, and other $TiO_2$ sols containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ showed higher optical absorption than pure sol in the visible light region. According to the experiments for removal of a gas-phase benzene, the pure $TiO_2$ film showed the highest photo dissociation rate in the ultraviolet light region, but in artificial sunlight the photo dissociation rate of $TiO_2$ coated films containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ was measured higher together with the increase of optical absorption by doping.

팔면체 [M(Ⅲ)$A_3B_3$] 형태 착물의 쌍극자모멘트에 대한 ${\pi}$ 결합의 영향 [M(Ⅲ) = Ti(Ⅲ), V(Ⅲ), Cr(Ⅲ), Fe(Ⅲ) 및 Ni(Ⅱ) ; A = O 또는 N ; B = N, S 또는 Cl] (The Effect of ${\pi}$ Bonds on the Dipole Moments for Octahedral [M(Ⅲ)$A_3B_3$] Type Complexes [M(Ⅲ) = Ti(Ⅲ), V(Ⅲ), Cr(Ⅲ), Co(Ⅲ) and Ni(Ⅱ) ; A = O or N; B = N, Cl or S])

  • 안상운;박의서;이기학
    • 대한화학회지
    • /
    • 제25권2호
    • /
    • pp.61-66
    • /
    • 1981
  • 팔면체 [M(Ⅲ)$A_3B_3$]형태 착물의 쌍극자모멘트에 ${\pi}$결합 분자궤도함수의 기여분을 계산하는 방법을 발전시켰다. [M(Ⅲ) = Ti(Ⅲ), V(Ⅲ), Cr(Ⅲ), Fe(Ⅲ), 또는 Co(Ⅲ); A = O 또는 N; B = N, S 또는 Cl] 쌍극자모멘트에 대한 ${\pi}$결합 분자궤도함수의 기여분은 ${\sigma}$결합 분자궤도함수의 기여분보다 작지만 비 편재화 ${\pi}$전자를 가지고 있는 킬레이트 착물에 까지도 무시할 수 없음이 발견되었다. 계산한 쌍극자모멘트가 ${\sigma}$결합 형성 만을 가정했을 때 보다 실험치에 가까웠다.

  • PDF