• 자원리싸이클링
• /
• 제21권5호
• /
• pp.31-37
• /
• 2012

실리콘 웨이퍼공정에서 발생하는 실리콘 슬러지로부터 실리콘 및 탄화규소를 분리한 다음, 전해법으로 원소형태의 실리콘을 회수하는 연구를 수행하였다. 실리콘 슬러지의 주요 불순물은 절삭유, 금속불순물, 실리콘 및 실리콘 카바이드를 들 수 있다. 기계적 선별법으로 분리한 실리콘, 탄화실리콘 복합물을 $1000^{\circ}C$에 1시간동안 염화 배소하여 응축하고 회수한 사염화실리콘을 이온성액체인 $[Bmpy]Tf_2N$에 용해하여 전해액으로 사용하였다. 순환전위법으로부터 $[Bmpy]Tf_2N$의 안정한 전압구간과 사염화실리콘을 용해한 $[Bmpy]Tf_2N$ 전해액에서 실리콘의 환원으로 추정되는 환원피크를 얻을 수 있었다. 정전위법(-1.9 V vs. Pt-QRE)에서 1시간동안 금 전극 상에 전해한 다음, 전극표면을 XRD, SEM-EDS 및 XPS 분석을 통하여 실리콘이 원소형태로 전착되었음을 확인하였으며, 미량의 산소가 검출되는 것은 분석과정에서 시편이 공기 중에 노출되었기 때문으로 판단된다.

• Journal of Ginseng Research
• /
• 제42권2호
• /
• pp.149-157
• /
• 2018

Background: Panax notoginseng leaves (PNL) exhibit extensive activities, but few analytical methods have been established to exclusively determine the dammarane triterpene saponins in PNL. Methods: Ultra-performance liquid chromatography coupled with time-of-flight mass spectrometry (UPLC/Q-TOF MS) and HPLC-UV methods were developed for the qualitative and quantitative analysis of ginsenosides in PNL, respectively. Results: Extraction conditions, including solvents and extraction methods, were optimized, which showed that ginsenosides Rc and Rb3, the main components of PNL, are transformed to notoginsenosides Fe and Fd, respectively, in the presence of water, by removing a glucose residue from position C-3 via possible enzymatic hydrolysis. A total of 57 saponins were identified in the methanolic extract of PNL by UPLC/Q-TOF MS. Among them, 19 components were unambiguously characterized by their reference substances. Additionally, seven saponins of PNL-ginsenosides Rb1, Rc, Rb2, and Rb3, and notoginsenosides Fc, Fe, and Fd-were quantified using the HPLC-UV method after extraction with methanol. The separation of analytes, particularly the separation of notoginsenoside Fc and ginsenoside Rc, was achieved on a Zorbax ODS C8 column at a temperature of $35^{\circ}C$. This developed HPLC-UV method provides an adequate linearity ($r^2$ > 0.999), repeatability (relative standard deviation, RSD < 2.98%), and inter- and intraday variations (RSD < 4.40%) with recovery (98.7-106.1%) of seven saponins concerned. This validated method was also conducted to determine seven components in 10 batches of PNL. Conclusion: These findings are beneficial to the quality control of PNL and its relevant products.

• 자원리싸이클링
• /
• 제30권1호
• /
• pp.66-76
• /
• 2021

전기로 제강분진 중에는 아연(Zn), 납(Pb)등과 같은 유가금속들이, 다양한 화합물(산화물 또는 염화물 등)의 형태로 다량 함유되어 있다. 전기로 제강분진 내에 함유되어 있는 이들 유용금속원소들을, 가장 효율적이며 안정적으로 회수할 수 있는 대표적인 방법으로서는 Rotary Kiln Process가 있다. Rotary Kiln Process는 전기로 제강분진에 환원제(Coke, 무연탄)와 석회석(염기도 제어용)을 첨가하여 성형한 후에 가열함으로서, 아연성분을 조산화아연(Crude Zinc Oxide : 60% Zn)의 형태로 회수하는 방법으로 오래전에 이미 상용화되었으며, 지금도 공정 및 설비의 단점을 개선하기 위한 연구개발을 지속적으로 수행하고 있다. 현재 국내에서도 전기로 제강분진을 재활용하여 조산화아연을 생산하는 다수의 상용화공장들이 가동되고 있다. 조산화아연 중에는, 아연성분 외에도 다양한 기타의 성분원소들(Pb, Cd, Sn, In, Fe, Cl, F 등)이 산화물, 염화물, 알칼리 화합물 등의 형태로 함께 혼재되어 있다. 그러므로 조산화아연을 건식 또는 습식아연제련용 원료로서 그대로 사용하게 되면 조산화아연에 함유된 이들 불순물 성분들이 미치는 악영향으로 인하여, 아연제련과정에서 많은 문제점들이 발생하므로. 따라서 이들 불순물 성분원소들을 가능하면 모두 제거하기 위한 건식 또는 습식정제공정이 추가로 필요하다. 따라서 본 연구에서는 조산화아연의 건식휘발 정제공정에서 발생되어 백필터에 포집된 아연(Zn) 및 납(Pb)을 함유한 2차분진(2nd Dust)으로부터 아연(Zn)과 납(Pb)을 효율적으로 분리하고, 더욱 부가가치를 높이기 위하여 Zn-cementation법으로 이들 성분원소들을 금속탄산염의 형태로 분리회수할 수 있는 공정기술에 대하여 기초적인 연구를 수행하였다.

• Composites Research
• /
• 제35권2호
• /
• pp.98-105
• /
• 2022

본 연구에서는, 미세유체 시스템 기반 폴리바이닐알코올(PVA)/그래핀 옥사이드(GO)/산화철(Fe₃O₄) 자성 마이크로겔을 제조하고 겔의 염료 흡착성능을 평가하였다. 겔의 흡착성능(q_e)은 염료의 농도, pH, 및 접촉시간을 변수로 하여 평가하였다. 사용된 염료는 메틸렌 블루(MB), 크리스탈 바이올렛(CV), 말라카이트 그린(MG)이며, 마이크로겔은 메틸렌 블루에 대해 가장 높은 흡착성능(191.1 mg/g)을 나타내었다. pH에 따른 겔의 흡착성능은 염료가 가지고 있는 atomic nitrogen 이온(N⁺)의 영향으로 모든 염료에서 pH가 10일 때 가장 높은 흡착성능을 나타냈다. 등온흡착 데이터분석을 통해 Langmuir 등온선의 일치도가 높아 단분자층 흡착임을 확인하였으며, 동역학적 분석에서는 유사 1차 반응 보다 유사 2차 반응의 일치도가 높아 화학흡착임을 확인하였다. 또한, 자성 마이크로겔의 회수와 겔표면에 흡착된 염료의 탈착을 통한 재사용 성능을 평가하였는데, 흡착성능은 흡·탈착 5회동안 70% 이상의 성능을 유지하는 것으로 나타났다.

• 센서학회지
• /
• 제15권2호
• /
• pp.120-126
• /
• 2006

Physicochemical and electrical properties for hydrogen gas sensors based on Pd-deposited $WO_3$ thin films were investigated as a function of Pd thickness, annealing temperature, and operating temperature. $WO_3$ thin films were deposited on an insulating material by thermal evaporator. XRD, FE-SEM, AFM, and XPS were used to evaluate the crystal structure, microstructure, surface roughness, and chemical property, respectively. The deposited films were grown $WO_3$ polycrystalline with rhombohedral structure after annealing at $500^{\circ}C$. The addition effect of Pd is not the crystallinity but the suppression of grain growth of $WO_3$. Pd was scattered an isolated small spherical grain on $WO_3$ thin film after annealing at $500^{\circ}C$ and it was agglomerated as an irregular large grain or diffused into $WO_3$ after annealing at $600^{\circ}C$. 2 nm Pd-deposited $WO_3$ thin films operated at $250^{\circ}C$ showed good response and recovery property.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.17-21
• /
• 2017

Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of $Fe_2O_3$ in concentrate could be increased from 39.6% to 55.0% and $V_2O_5$ from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.309-312
• /
• 2003

Tin dioxide($_SnO2$) thin films were deposited on alumina substrate by metal-organic chemical vapor deposition (MOCVD) as a function of temperature and time. Thin films were fabricated from di-n-butyltin diacetate as a precursor and oxygen as an oxidation. The microstructure of deposited films was characterized by X-ray diffraction and field emission scanning electron microscopy(FE-SEM). The thickness was linearly increased with deposition time and $SnO_2$structure was found from $375^{\circ}C$ for the deposition time of 32 min. The maximum sensitivity to 500ppm CO gas was observed for the specimens deposited at $375^{\circ}C$ for 2 min at the operating temperature of $350^{\circ}C$. Gas sensitivity to CO increased with decreasing the film thickness. The sensing properties of response time, recovery and sensitivity of CO were changed with variations of substrate temperature and time.

• Steel and Composite Structures
• /
• 제9권3호
• /
• pp.191-208
• /
• 2009

Observations from experiments and real fire indicate that restrained steel beams have better fire-resistant capability than isolated beams. Due to the effects of restraints, a steel beam in fire condition can undergo very large deflections and the run away damage may be avoided. However disgusting damages may occur in the beam-to-column connections, which is considered to be mainly caused by the enormous axial tensile forces in steel beams resulted from temperature decreasing after fire dies out. Over the past ten years, the behaviour of restrained steel beams subjected to fire during heating has been experimentally and theoretically investigated in detail, and some simplified analytical approaches have been proposed. While the performance of restrained steel beams during cooling has not been so deeply studied. For the safety evaluation and repair of steel structures against fire, more detailed investigation on the behaviour of restrained steel beams subjected to fire during cooling is necessary. When the temperature decreases, the elastic modulus and yield strength of steel recover, and the contraction force in restrained steel beams will be produced. In this paper, an incremental method is proposed for analyzing the behaviour of restrained steel beams subjected to cooling. In each temperature decrement, the development of deformation and internal forces of a restrained beam is divided into four steps, in order to consider the effect of the recovery of the elastic modulus and strength of steel and the contraction force generated by temperature decrease in the beam respectively. At last, the proposed approach is validated by FE method.

• 열처리공학회지
• /
• 제10권2호
• /
• pp.81-92
• /
• 1997

The effect of alloying elements, precipitate size, its distribution, and dislocation substructure resulted from warm rolling or cold rolling in the superplastic Al-Mg alloy system was investigated. One of the major requirements for fine structure superplasticity is that the grain size should be very small. Fine grain structure is controlled by the dislocation substructure and the dynamic recrystallization during hot or warm working. The recovery of Al-Mg base alloys was constrained resulting in relatively high dislocation density when the alloys were warm rolled. In particular, Al-Mg-Zr alloy exhibited the smallest sub-grain size among Al-Mg alloys containing Mn, Cu, Zr as a third element. The Al-Mg-Mn alloy cold rolled 80% after hot rolling showed the maximun strain rate sensitivity exponent, m, of 0.75 under strain rate of $7.1{\times}10^{-4}/s$ at $500^{\circ}C$. The elongation of the alloys was limited in spite of high m values due to large dispersoids containing appreciable amount of Fe impurities.

• 한국물환경학회지
• /
• 제21권2호
• /
• pp.196-204
• /
• 2005

The objective of this study is to evaluate the possibility to apply pre-ozone and membrane system for drinking water. This system is improved in fouling control by pre-ozone system. It is composed of ultrafiltration hollow fiber type membrane and ozone reactor. The result of this study is that the flux is increased about 10.7% and decreased in TMP by the pre-ozone. Also, backwashing pressure decreased about 18%. The optimum concentration of residual ozone is 0.3~0.5 ppm. During the period, the recovery ratio of this system was turned out to be 90% as the flowrate of effluent is $67.1m^3/day$. When the TMP and backwashing pressure was $0.85kg/cm^2$ and $1.10kg/cm^2$, this system was stable without sudden fouling. Finally, the quality of effluent is satisfied the guidelines for potable water quality such as turbidity, color, E.coli, Mn, Al, Fe and so on.