• 제목/요약/키워드: Fe recovery

검색결과 280건 처리시간 0.022초

벼 2모작 논에서 보릿짚 시용이 토양이화학성 및 양분흡수에 미치는 영향 (Effects of Barley Straw Application on Soil Physico-Chemical Properties and Nutrient Uptake in Rice Paddy Field of Double Cropping)

  • 류철현;양창휴;강승원;한상수;김성조
    • 한국토양비료학회지
    • /
    • 제34권2호
    • /
    • pp.110-116
    • /
    • 2001
  • 벼 2모작 재배시 보릿짚시용후 질소시용량별 토양의 이화학적 변화와 수도체의 양분흡수량, 질소이용효율을 조사하기 위하여 2년간('97~'98) 전북통에서 시험한 결과는 다음과 같다. 보릿짚시용으로 경도, 용적밀도, 고상율이 낮아졌고 공극율과 기상율이 증가하여 토양의 물리성이 개선되었다. 보릿짚시용으로 벼 재배후 토양의 pH, OM, T-C, $SiO_2$, K, CEC가 증가한 반면 $P_2O_5$이 감소되었다. 보릿짚시용후 벼 재배시 토양중 $Fe^{+{+}}$함량은 분얼기~유수형성기까지 높은 함량을 보였으나 출수기에는 낮아졌고 $Mn^{+{+}}$함량은 증가되었다. 보릿짚시용시 수도체로의 시비질소 흡수량은 질소시용량 $126kg\;ha^{-1}$ 시용구까지는 증가하였으나 질소 $144kg\;ha^{-1}$ 시용구에서는 감소되었다. 또 질소시용량이 적을수록 보릿짚시용구에서 무시용구보다 시비질소 흡수기간이 길었다. 수도체로의 질소이용율은 분얼기에는 1% 전후였지만 최고분얼기부터 크게 증가하였고 보릿짚시용구에서 낮았다. 수도체로의 인산흡수량은 보릿짚시용구에서 질소시용량에 관계없이 모두 높았으나 칼리함량은 낮았다.

  • PDF

파일럿 규모에서 철-니켈 합금 에칭폐액 재생 (Recovery of Iron-Nickel Alloy Etching Waste Solution in Pilot Scale)

  • 채병만;김대원;황성옥;김득현;이상우
    • 청정기술
    • /
    • 제23권4호
    • /
    • pp.393-400
    • /
    • 2017
  • 본 연구에서는 염화제이철의 재생공정으로 기존 용매추출법에서 사용하고 있는 용매인 TBP 및 Alamine336 대신에 새로운 용매를 통해 용액 내에 존재하는 Ni과 Fe를 분리 및 회수하는 공정을 개발하였다. Lab 실험을 통하여 실험조건을 최적화하였으며, 이를 바탕으로 상업화를 위한 $10L\;h^{-1}$급 파일럿 설비를 구축하였다. 또한 파일럿 실험을 통하여 양산을 위한 공정 데이터를 확보하였으며, 제조된 염화제이철의 부식실험을 통하여 사용할 수 있는 제품 품질에 문제없음을 확인하였다.

Cu-Mg-P계 고전도성 합금의 미세조직 및 기계적 성질에 미치는 미량합금원소의 영향 (Effects of Minor Alloying Elements on the Microstructure and Mechanical Properties of High Conductivity Cu-Mg-P Base Alloys)

  • 김정민;박준식;김기태;김현길
    • 한국주조공학회지
    • /
    • 제28권2호
    • /
    • pp.64-68
    • /
    • 2008
  • The microstructure of Cu-Mg-P base alloys were significantly affected by small amounts of Fe and Co additions, however the tensile properties and electrical conductivity of the Cu alloys were mainly determined by the fabrication process. Relatively high electrical conductivity (> 80% IACS) was obtained in the all Cu-Mg-P based alloys when they were finally aged at $480^{\circ}C$. Tensile properties could be significantly enhanced by final cold rolling, especially at extremely low temperatures. Softening of cold-rolled alloys took place at about $450^{\circ}C$ owing to recovery and recrystallization, but it was delayed up to $500^{\circ}C$ in the Fe-added alloy.

훼리틴 생산 재조합 효모의 철분 결핍성 빈혈 개선 효과 (Repair of Iron Deficiency in Rats by the Intake of Recombinant Yeast Producing Human H-ferritin)

  • 황은희
    • 동아시아식생활학회지
    • /
    • 제16권1호
    • /
    • pp.93-98
    • /
    • 2006
  • This study examined whether or not the iron that is accumulated in the recombinant microbes that produce ferritin is bioavailable to rats with iron deficiency. Rats induced with iron deficiency were treated with iron preparations of $Fe(NH_4)_2(SO_4)_2$, horse spleen ferritin, control yeast, and ferritin-producing recombinant yeast for 14 days. The bioavailability of iron was examined by measuring hemoglobin concentration, hematocrit value, and tissue iron stores. Differences between dietary groups were determined by one-way ANOVA, at the level of significance p<0.05. Based on hemoglobin concentration and hematocrit value, iron in $Fe(NH_4)_2(SO_4)_2$, horse spleen ferritin, and ferritin-producing yeast were bioavailable in rats and cured iron deficiency. The efficacy of ferritin and ferritin-producing yeast was confirmed in establishing tissue iron stores after the induction of iron deficiency. The iron sources of ferritin and the ferritin-producing yeast seemed to be as effective for the recovery from iron deficiency as the iron compounds of ferric citrate and ferrous ammonium sulfate. The results suggest that the iron stored in ferritin of the recombinant yeast is bioavailable, and that the recombinant yeast may contribute widely as a source of iron to resolve the global problem of iron deficiency.

  • PDF

산 침출 Mg폐액으로부터 수열법에 의한 Mg-Ferrite 분말회수 (Recovery of Mg-Ferrite Powder from Acid Leaching Mg Waste by Hydrothermal Method)

  • 김영순;윤기석;안찬영;이종현;원창환
    • 자원리싸이클링
    • /
    • 제6권4호
    • /
    • pp.31-37
    • /
    • 1997
  • 본 논문은 SHS(Self propagating High-temperature Synthesis)법을 이용하여 $WO_3$/Mg 계로부터 W을 제련시 산침출로 인하여 발생하는 Mg 폐액으로부터 Mg-ferrite분말을 회수하는 방법에 대한 것으로, 습식법 주에서 단분산성 구형 초미립자들을 하소 공정없이 직접제조가능하다는 장점을 가진 수열합성법을 이용하여 Mg-ferrite분말을 회수하는 것을 중심 내용으로 하고 있다. 산침출 Mg 폐액으로부터 수열법에 의한 Mg-Ferrite 분말 회수시 폐용액의 pH와 pHwhwjf제는 분말의 특서에 크게 영향을 주었다. 분말회수의 최적조건은 ${Fe}^{2+}$ : ${Mg}^{2+}$몰비가 2:1, 반응온도가$ 200^{\circ}C$, 반응시간이 1시간, pH=12, 산소분압이 2000psi였고, 이때 제조된 분말은 단분산성, 균일한 입도분포를 가진 구형입자이었다.

  • PDF

Column Preconcentration and Determination of Cobalt(II)Using Silica Gel Loaded with 1-Nitroso-2-naphthol

  • Shin, Eun-Mi;Choi, Hee-Seon
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권7호
    • /
    • pp.1516-1520
    • /
    • 2009
  • A sensitive technique for the determination of trace Co(II) in various samples after column preconcentration by adsorbing onto silica gel loaded with 1-nitroso-2-naphthol was developed. Several experimental conditions, such as pH of sample solution, the amount of silica gel loaded with 1-nitroso-2-naphthol, the flow rate for adsorption and so forth, were optimized. The interfering effects of diverse concomitant ions were investigated. Fe(III) interfered with more than any other ions, but the interference by Fe(III) was completely eliminated by adjusting the amount of silica gel loaded with 1-nitroso-2-naphthol to 0.30 g. The dynamic range, the correlation coefficient ($R^2$), and the detection limit obtained by the proposed technique were 3.0-140.0 ng m$L^{-1}$, 0.9942, and 1.81 ng m$L^{-1}$, respectively. For validating the technique, the aqueous samples (tap water, reservoir water, stream water, and wastewater) and the plastic samples were used as real samples. Recovery yields of 93.0-107.0% were obtained. These measured data were not different from ICP-MS data at the 95% confidence level by F test. Based on the results of the experiment, it has been found that the proposed technique can be applied to the determination of Co(II) in various real samples.

고로수재슬래그로부터 고순도 질산칼슘 회수에 관한 연구 (Recovery of High Purity Calcium Nitrate from Blast Furnace Slag)

  • 유정근;이만승;김경수;최승훈
    • 자원리싸이클링
    • /
    • 제13권2호
    • /
    • pp.33-38
    • /
    • 2004
  • 제철산업에서 발생되는 고로수재슬래그로부터 고순도 질산칼슘을 회수할 수 있는 독창적인 자원화 공정을 위한 개념과 실험결과를 수록하였다. 먼저 고로수재슬래그를 질산과 반응시킨 후, 불용성의 실리카를 분리하였고, 생석회를 첨가하여 여액의 pH를 6∼8범위로 조절하여 Fe, Al, Mg등의 불순물을 침전, 여과 분리시켰으며, 고농도의 질산칼슘여액을 결정화시킴으로써 비료 등으로 활용될 수 있는 순도가 98% 이상인 고부가 가치성 질산칼슘 4수화물 결정을 회수하였다.

Pd 나노입자의 자가 회복이 가능한 지능형 페로브스카이트 산화물 음극의 직접 탄화수소계 SOFC 성능 평가 (Self-Regeneration of Intelligent Perovskite Oxide Anode for Direct Hydrocarbon-Type SOFC by Nano Metal Particles of Pd Segregated)

  • 오미영;;신태호
    • 한국전기전자재료학회논문지
    • /
    • 제31권5호
    • /
    • pp.345-350
    • /
    • 2018
  • Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

전자(電子)스크랩에서 구리 및 주석의 회수(回收)를 위한 질산(窒酸) 침출(浸出) 및 침출액(浸出液)에서 유리질산(遊離窒酸) 제거(除去) 연구(硏究) (Nitric acid leaching of electronic scraps and the removal of free nitric acid from the leaching solution for the recovery of copper and tin.)

  • 안재우;서재성
    • 자원리싸이클링
    • /
    • 제18권5호
    • /
    • pp.44-51
    • /
    • 2009
  • 전자스크랩중에 함유된 구리 및 주석을 습식공정으로 회수하기 위하여 기초 연구를 실시하였다. 침출제로 질산을 이용하여 분쇄된 전자스크랩에서 구리, 주석, 납, 철 등의 금속 성분들에 대한 침출율을 조사하고 최적 침출조건을 제시 하였다. 이러한 질산 침출 용액으로부터 TBP를 이용하여 유리질산을 분리 추출하여 재활용하기 위한 기초 연구를 실시하였다. 실험 결과 3.0-4.0 M 질산으로 구리를 효과적으로 침출시킬 수 있었으며, 질산 침출액 중 유리질산을 60% TBP에 의해 95%정도 추출이 가능하였고, 유기상에 추출된 질산의 98%를 증류수에 의해 탈거하여 질산침출액으로 재사용이 가능하였다.

폐 Ni-Cd전지로부터 Ni의 분리 및 회수에 관한 연구 (Recovery and Separation of Nickel from the Spent Ni-Cd Batteries)

  • 김종화;남기열
    • 자원리싸이클링
    • /
    • 제9권2호
    • /
    • pp.11-17
    • /
    • 2000
  • 니켈의 소비량은 계속 중가 추세에 있으며, 이와 함께 2차전지, 페라이트 페촉매는 사용 후의 폐기물이 연속적으로 발생하고 있다. 이들 중 본 연구에서는 Ni-Cd 2차전지 폐기물을 이용하여 니켈 회수를 수행하였다 폐전지의 구성은 니켈이 24wt% 칠이 30wt%, 카드뮴이 18.5wt%, 그리고 산소와 절연물 등으로 이루어져 있었다. 금속 회수의 방법은 침출 후 용매 추출법을 적용하였다. 염산침출에서는 1N 이상의 농도에서 카드뮴이 100% 침출되었고, 니켈은 20,000ppm이상 침출되어 70%이상의 침출율을 보였다. 산침출에서 얻은 침출액은 30vol%의 MSP-8로서 카드뮴만 추출하고 니켈은 잔류액으로 분리할 수 있었다. 그리고 암모늄염에 의한 침출에서는 $NH_4NO_3$에 의한 침출 시 니켈과 카드뮴만을 선택적으로 침출하는데 우수하였다. 질산암모늄에 의해 얻은 침출액 중의 Ni LIX계 추출제를 이용하여 100% 회수할 수 있었고, 잔류액 중의 카드뮴은 D2EHPA로 75% 이상 회수할 수 있었다.

  • PDF