• Title/Summary/Keyword: Fe ion

Search Result 1,133, Processing Time 0.031 seconds

The Thermal Dynamics of Fe Ion on the M-type Ba-ferrite (M형 Ba-Ferrite에서 Fe 이온의 열 진동에 관한 연구)

  • Sur, Jung-Chul;Ghim, Jin-Soo;Choi, Jong-Wan
    • Journal of the Korean Magnetics Society
    • /
    • v.21 no.1
    • /
    • pp.5-9
    • /
    • 2011
  • M$\ddot{o}$ssbauer and Raman spectrum studies have been carried out on the 2b-site Fe ion in the Ba-ferrite (M-type). The thermal dynamics of Fe ion was analyzed by M$\ddot{o}$ssbauer spectra at different angles between the $\gamma$-ray direction and c-axis. The vibration on the 2b-site was more active compare to other direction and had very strong intensity in the Raman spectrum.

Performance of Nanosized Fe3O4 and CuO Supported on Graphene as Anode Materials for Lithium Ion Batteries (그래핀에 담지된 Fe3O4와 CuO 나노입자의 리튬이차전지 음극성능)

  • Jeong, Jae-Hun;Jung, Dong-Won;Han, Sang-Wook;Kim, Kwang-Hyun;Oh, Eun-Suok
    • Journal of the Korean Electrochemical Society
    • /
    • v.14 no.4
    • /
    • pp.239-244
    • /
    • 2011
  • In this study, $Fe_3O_4$/graphene and CuO/graphene composites were synthesized by the polyol reduction method using ethylene glycol, and their performances as the anodes of lithium ion batteries were evaluated. The physical characteristics of the synthesized composites were analyzed by SEM, XRD, and TGA. In addition, their electrochemical properties were examined by the electrochemical analysis techniques such as charge/discharge performance, cyclic voltammetry, and AC impedance spectroscopy. The cells composed of $Fe_3O_4$/graphene and CuO/graphene composites showed better performance than the graphene electrode, due to the dispersion of nanosized $Fe_3O_4$ or CuO on the surface of graphene and the formation of good electrical network in the electrode. Their composites kept the reversible capacity more than 600 mAh/g even after the charging/discharging of 30 cycles.

The Removal of Heavy Metals in Aqueous Solution by Hydroxyapatite (Apatite를 이용한 중금속 제거)

  • 강전택;정기호
    • Journal of Environmental Science International
    • /
    • v.9 no.4
    • /
    • pp.325-330
    • /
    • 2000
  • The hydroxyapatite (HAp) for the present study was prepared by precipitation method in semiconductor fabrication and the crystallized at ambient to 95$0^{\circ}C$ for 30min in electric furnace. The ion-exchange characteristics of HAp for various heavy metal ions such as $Cd^{2+}, Cu^{2+}, Mn^{2+}, Zn^{2+}, Fe^{2+}, Pb^{2+}, Al^{3+}, and Cr^{6+}$ in aqueous solution has been investigated. The removal ratio of various metal ions for HAp were investigated with regard to reaction time, concentration of standard solution, amount of HAp and pH of solution. The order of the ions exchanged amount was as follws: $Pb^{2+}, Fe^{3+}>Cu^{2+}>Zn^{2+}>Al^{3+}>Cd^{2+}>Mn^{2+}>Cr^{6+}. The Pb^{2+}$ ion was readily removed by the Hap, even in the strongly acidic region. The maximum amount of the ion-exchange equilibrium for $Pb^{2+}$ ion was about 45 mg/gram of HAp. The HAp would seem to be possible agent for the removal of heavy metal ions in waste water by recycling of waste sludge in semiconductor fabrication.

  • PDF

Highly Selective Transport of Ag+Ion through a Liquid Membrane Containing 2-Mercaptobenzothiazole as a Carrier

  • Akhond, Morteza;Tashkhourian, Javad
    • Bulletin of the Korean Chemical Society
    • /
    • v.24 no.4
    • /
    • pp.489-493
    • /
    • 2003
  • 2-Mercaptobenzothiazole was used as a highly selective and efficient carrier for the uphill transport of silver ion through a chloroform bulk liquid membrane. In the presence of thiosulfate ion as a suitable metal ion acceptor in the receiving phase, the amount of silver transported across the liquid membrane after 180 min was 90 ± 3.0%. The selectivity and efficiency of silver ion transported from aqueous solutions containing equimolar mixtures of $Zn^{2+}, Cu^{2+}, Co^{2+}, Ni^{2+}, Cd^{2+}, Pb^{2+}, Bi^{3+}, Fe^{2+}, Fe^{3+}, Pd^{2+}, Mn^{2+}, Hg^{2+}, Sn^{2+}, Ca^{2+}, Mg^{2+}, K^+, Na^+ and Li^+$ were investigated.

Selection and Cultivation of Microorganism Producing Iron Superoxide Dismutase(Fe-SOD) (Iron Superoxide Dismutase( Fe-SOD)를 생산하는 미생물의 선발 및 배양)

  • 이태호;정숙현
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.23 no.6
    • /
    • pp.1020-1026
    • /
    • 1994
  • Pseudomonas plycolor was used to investigated the optimal culture condition to examine the various properties of superoxide dismutase (SOD). this SOD was inhibited by $H_2O_2$, azide ion, but not by cyanide ion. This result indicates that the enzyme might be a Fe-SOD. The composition of optimal culture medium for the enzyme production was 3% of glycerin, 1% of polypeptone, 0.5% of meat extract, 0.2% of KCI and the initial ph was 9.0 . The cultivation for the enzyme production was carried out in 500ml shaking flask containing 100ml of the optimal medium at $30^{\circ}C$ on a reciprocal shaker. The enzyme production reached maximum at 15hrs of cultivation and then declined sharply afterward.

  • PDF

Urgency of LiFePO4 as cathode material for Li-ion batteries

  • Guo, Kelvii Wei
    • Advances in materials Research
    • /
    • v.4 no.2
    • /
    • pp.63-76
    • /
    • 2015
  • The energy crisis involving depletion of fossil fuel resource is not the sole driving force for developing renewable energy technologies. Another driving force is the ever increasing concerns on the air quality of our planet, associated with the continuous and dramatic increase of the concentration of greenhouse gas (mainly carbon dioxide) emissions. The internal combustion engine is a major source of distributed $CO_2$ emissions caused by combustion of gasoline derived largely from fossil fuel. Another major source of $CO_2$ is the combustion of fossil fuels to produce electricity. New technologies for generating electricity from sources that do not emit $CO_2$, such as water, solar, wind, and nuclear, together with the advent of plug-in hybrid electric vehicles (PHEV) and even all-electric vehicles (EVs), offer the potential of alleviating our present problem. Therefore, the relevant technologies in $LiFePO_4$ as cathode material for Li-ion batteries suitable to the friendly environment are reviewed aim to provide the vital information about the growing field for energies to minimize the potential environmental risks.

Yellowing of Chemical Pulp by Adding Glucuronoxylan

  • Yoon, Byung-Ho;Kim, Young-Seok
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2006.06b
    • /
    • pp.361-364
    • /
    • 2006
  • Generally, aging of paper is evaluated by folding endurance and degree of yellowing. It was known as that lignin, hemicellulose and metallic ion affect yellowing of mechanical or chemical pulps. Among these elements, especially, the study of hemicellulose that affect at yellowing of pulp is insufficient. In this study, we examined into the influence that glucuronoxylan or glucomannan and metallic ion($Cu^{2+},\;Fe^{2+},\;Fe^{3+},Mn^{2+}$) residued in pulp get each or when mixed at yellowing. Filter paper was treated with each metallic ion, glucuronoxylan and the mixture of glucuronoxylan and metal ions, and brightness and CIE $L^*a^*b^*$ was measured after accelerated aging. As the results of measurements, the filter paper processed by 10% glucuronoxylan was dropped 2-3% on the brightness after accelerated aging for 24 hours. Also, the filter paper treated with glucuronoxylan and $Fe^{2+}$ was dropped 7% on the brightness.

  • PDF

A Study on the Initiation of Pitting Corrosion of Fe-17Cr Alloy Using Micro-Droplet Cell Technique (Micro-droplet cell을 이용한 Fe-17Cr 합금의 공식 발생에 대한 연구)

  • Kim, Jae-Jung;Lee, Jae-Bong
    • Korean Journal of Metals and Materials
    • /
    • v.46 no.12
    • /
    • pp.809-816
    • /
    • 2008
  • The influences of various parameters such as inclusions, surface roughness, exposed areas and chloride ion concentrations on the initiation of pitting of Fe-17Cr alloy were investigated, using micro-droplet cell technique. Micro-droplet cell allows one to align the micro-electrode to the desired spot of the working electrode and measure directly local currents with the potentiodynamic polarization. Micro electrochemical tests were carried out at the inclusions after EDX analysis of inclusion. EDX analysis identified inclusions as Cr-oxides. It was found that some active inclusions among Cr-oxide inclusions acted as initiation sites for pitting corrosion. In addition, the rougher surface and the denser chloride ion concentration offered easier pit initiation sites, causing the more susceptible to pitting corrosion.

Magnetic and Microwave Absorbing Properties of Ti-and Co-Substituted Barium Ferrite (BaFe12-2X TiXCoXO19)

  • Han-Shin Cho;Yong-Jin Kim;Sung-Soo Kim
    • Journal of Magnetics
    • /
    • v.4 no.2
    • /
    • pp.65-68
    • /
    • 1999
  • The M-type barium ferrite ($BaFe_{12}O_{19}$) is well known magnetic material to be used as a permanent magnet due to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ to its strong uniaxial anisotropy. The substitution of nonmagnetic $Ti^{+4}$ and magnetically weak $Co+^2ion for Fe^{+3}$ sublattices reduces the uniaxial anisotropy and those compounds open a new application field of noise suppressor at high frequencies. In this study, the magnetic and microwave absorbing properties are investigated in Ti-and Co-substituted barium ferrites ($BaFe_{12-2X} Ti_XCo_XO_{19}$). The saturated magnetization decreases linearly with the substitution of Ti and Co. The rapid drop in coercive force is observed with Ti and Co substitution upto x=1.2. The magnetic permeability spectrum shows the natural magnetic resonance in the specimens with small coercive force and large attenuation of microwave is predicted in those specimens at high frequencies (above 4 GHz).

  • PDF