• Journal of Energy Engineering
• /
• v.3 no.1
• /
• pp.70-76
• /
• 1994

본 연구는 방사성 폐액의 처리를 목적으로 화학처리와 한외여과막(UF)의 결합공정에 의해서 세슘이온의 제거특성을 조사하였다. 이 공정은 대상핵종과 선택성이 크고 한외여과막에 의해서 분리가 가능한 거대분자를 주입하여 핵종을 결합시키고, 이를 한외여과막에 의해서 분리 제거하는 개념이다. 실험은 흡착제로서 K2Cu3(Fe(CN6)2)를 제조하여 주입하였고 회분식 UF stirred cell를 이용하였으며, 용액의 pH, 세슘이온의 농도 및 K2Cu3(Fe(CN6)2)의 농도에 따라 세슘이온의 제거효율을 측정하였다. 세슘의 제거효율은 pH 및 K2Cu3(Fe(CN6)2)의 몰비에 따라 결정되며, pH가 5∼6에서 높은 제거율을 나타내었고 Cs/K2Cu3(Fe(CN6)2)의 몰비가 1.5 이하에서 90% 이상 제거되었다. K2Cu3(Fe(CN6)2)에 대한 Cs의 결합특성은 Langmuir isotherm형태의 식으로 나타내어 평가하였으며, 이때 세슘이온의 최대 흡착용량은 1.72 mM/mM K2Cu3(Fe(CN6)2) 이었다.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.45-54
• /
• 1987

Dowex 1-X8 resin ion exchanged with calcon carboxylic acid (CCA-Dowex 1-X8) and 2-methyl-8-hydroxyquinoline(MHQ) impregnated-Amberlite XAD-4 resin (MHQ-XAD-4) were examined for the separation and preconcentration of ferric ion from the various matrices. The stabilities of these resins were investigated, and their capacities on ferric ion were also measured. The effect of pH on the adsorption of ferric ion and matrix ions, such as Al(Ⅲ) and Ca(Ⅱ), was investigated to determine the optimun pH ranges. Separation and preconcentration of iron in aluminium foil and mineral water samples were studied by elution method with these resin columns. The recovered ions by 10ml of 2F nitric acid was determined by flame atomic spectrophotometry. SP-Sephadex C-25 column was used to separate ferrous and ferric ion in mineral water by stepwise elution with ferrozine and 1 % ascorbic acid-ferrozine solution. The concentrated and separated each ion could be determined spectrophotometrically at the analytical wavelenth of Fe(Ⅱ)-ferrozine complex (562nm).

• Resources Recycling
• /
• v.19 no.3
• /
• pp.9-15
• /
• 2010

Domestic gold mine tailings, generally, contain a lot of non-metallic silica and clay minerals. These minerals can be separated from the tailings by various physical separation methods and used as raw materials for cements and ceramic products. In these physical separation procedures, metallic complex sulfides, in which Au and metallic constituents such as Pb, As and Fe were concentrated, were obtained as a by-product. These metallic constituents should be removed or separated from the by-product to extract Au efficiently. In this work, removal and separation processes of Pb, As, and Fe from the by-product were investigated. Pb was removed to under 3% by using alkaline oxidative leaching at the leaching condition of $120^{\circ}C$, 2M NaOH, 100psi $Po_2$, 250r.p.m., 4 wt.% solid and 30 min. leaching time. The leached residue was roasted and separated magnetically to obtain a non-magnetic product contained <0.2% As, <3% Fe and high concentrated Au more than 8,000 ppm.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.207-210
• /
• 2002

PVDF는 측쇄에 C=O기를 갖는 고분자인 PMMA와 PVAc와의 블렌드 및 주쇄에 C=O기를 갖는 poly(1,4-butylene adipate) (PBA)와의 블렌드에서 PVDF의 융점보다 상당히 높은 온도에서 LCST거동을 보이고 있음이 알려져 있다. 그런데 PVDF/PMMA와 PVDF/PVAC 블렌드계에서는 LCST가 고분자의 열분해온도와 유사하여 LCST거동을 실험적으로 관찰하기 어려웠다. 그런데 PVDF/PBA 블렌드계에서는 실험적으로 측정할 수 있을 정도로 LCST가 낮아지긴 하였지만 PBA의 열분해를 완전히 배제하기엔 아직도 높은 온도이다.[1] (중략)

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.515-520
• /
• 1999

The spectrophotometric determination of Al(III) with thorin have been investigated. The optimum condition of pH, concentration of ligand and surfactant, and stability were evaluated. The thorin ligand offers selective separation of Al(III) from sample solution containing Fe(III), Ni(II), Cu(II), Pb(II) and Cu(II). Various surfactants were tested and Triton X-100 showed the best stability and the maximum absorbance in an aqueous solution of Al(III)-Thorin-Triton X-100 complex appears about 526 nm. The method was applied for the determination of Al(III) in mixed sample solution. Separation and preconcentration was performed with a short column filled with resorcinol-formaldehyde resin. Control of the pH during the column operation is essential because the adsorption capacities are very sensitive to change in pH. Their separation was carried out in 0.2 M acetic acid-sodium acetate buffer solution (pH 4.5) and 1.0 M $HNO_3$media.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.151-157
• /
• 1990

The maximum nitrogen fixation activity of the associative, microaerobic and acid tolerant bacteria, Azospirillum amazonense Kp1 was obtained with 0.2Kpa of $O_{2}$ and showed a reversible inhibition by the higher concentrations. Ammonium treatment caused a gradual inhibition of the activity up to 350mM. The nitrogenase systems were purified by gradient chromatography on DEAE-52 cellulose, heat treatment and preparative PAGE. The MoFe protein showed molecular weight of 210,000 including two nonidentical subunits with apparent molecular weights of 55,000 and 50,000 and an isoelectricpoint of 5.2 and contained 2, 24 and 28 atoms of Mo, Fe and acid labile S per molecule. The Fe protein revealed molecular weight of 66,000 including two types of subunits with molecular weights of 35,000 and 31,000 and an isoelectric point of 4.6, and contained 4 atoms of Fe and 6 atoms of S per molecule. The maximum specific nitrogenase activity attained 2,200 and 1,700nM $C_2H_4mg^{-1} min^{-1}$, respectively for MoFe and Fe proteins at pH7 and $35^{\circ}C$. The activity was lost after 10 and 30 days under the cold room ($4^{\circ}C$) condition for Fe and MoFe proteins, respectively.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.3-10
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. The flotation with Fe(III) showed 99.8% removal efficiency of cohalt on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, and flotation time 30 min. When the waste solution, was treated with 35% $H_2O_2$ prior to adsorbing colloidal flotation, the optimal pH for removing cobalt shifted m to weak alkaline range and flotation could be applied in wider range of pH as compared to non-use of $H_2O_2$. Additional use of 20 ppm Al(III) after precipitation of 50 ppm Co(II) with 50 ppm Fe(III) made the optimal pH range for preferable flotation w wider. Foreign ions such as, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$ were adopted and their effects were observed. Of which sulfate ion was f found to be detrimental to removal of cob퍼t ion by flotation. Coprecipitation of Co ion with Fe(III) and Al(III) resulted in b better removal efficiency of cobalt IOn 피 the presence of sulfate ion.

• Clean Technology
• /
• v.30 no.1
• /
• pp.28-36
• /
• 2024

As demand for electric vehicles increases, the market for lithium-ion batteries is also rapidly increasing. The battery life of lithium-ion batteries is limited, so waste lithium-ion batteries are inevitably generated. Accordingly, lithium was selectively preleached from waste lithium iron phosphate (LiFePO₄, hereafter referred to as the LFP) cathode material powder among lithium ion batteries, and iron phosphate (FePO₄) powder was recovered. The recovered iron phosphate powder was mixed with alkaline sodium carbonate (Na₂CO₃) powder and heat treated to confirm its crystalline phase. The heat treatment temperature was set as a variable, and then the leaching rate and powder characteristics of each ingredient were compared after water leaching using Di-water. In this study, lithium showed a leaching rate of approximately 100%, and in the case of powder heat-treated at 800 ℃, phosphorus was leached by approximately 99%, and the leaching residue was confirmed to be a single crystal phase of Fe₂O₃. Therefore, in this study, lithium, phosphorus, and iron components were individually separated and recovered from waste LFP powder.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.51-55
• /
• 2003

To develop environment-friendly biofertilizer solubilizing insoluble phosphates, a bacterium possessing a high ability to solubilize $Ca_{3}(PO_{4})_{2}$) was isolated from the rhizosphere of peas. On the basis of its morphological, cultural, physiological characteristics, and Vitek analysis, this bacterium was identified as Pantoea agglomerans. The optimal medium composition and cultural conditions for the solubilization of insoluble phosphate by P. agglomerans R-38 were 3% of glucose.0.1% of TEX>$NH_{4}NO_{3}$, 0.02% of $MgSO_{4}\cdot\7H_{2}O$, and 0.06% of $CaCl_{2}\cdot\2H_{2}O$ along with initial pH 7.5 at $30^{\circ}C$. The highest soluble phosphate production under optimum condition was 898 mg/L after 5 days of cultivation. The solubilization of insoluble phosphate was associated with a drop in the pH of the culture medium. The strain produced soluble phosphate to the culture broth with the concentrations of 698 mg/L against CaHPO$_4$, 912 mg/L against hydroxyapatite, 28 mg/L against $FePO_{4}\cdot\4H_{2}O$, and 19 mg/L against $AIPO_{4}$, respectively.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.197-202
• /
• 1998

1-(2-Pyridylazo)-2-Naphthol (PAN) has been widely used as a spectrophotometric reagent and metallochromic indicator for many metal ions. In this work, the chelate reagent of PAN was used as mobile phase additive for the separation of metal ions by reversed phase chromatography. Metal ions could be detected by monitoring the effluent at 570 nm with spectrophotometric detector. In order to investigate retention behaviors of the metal ions, the chromatograms and capacity factors were obtained as the variation of pH, ionic strength and composition of organic modifier in mobile phase. Under the obtained optimum conditions, the mixtures of Fe(III), Ni(II), Cu(II), Zn(II) and Co(II) could be separated successfully and the calibration curves under the recommended conditions showed an excellent linearity. The detection limits(S/N) were feasible at the nanogram level.