• 대한화학회지
• /
• 제68권1호
• /
• pp.20-24
• /
• 2024

This article presents the advantages of utilizing gossypol and its derivatives as reagents for iron (III) (Fe (III)) ions. A novel spectrophotometric method has been developed for the determination of Fe (III) using gossypol derivatives in the presence of a universal buffer solution. Optimal conditions have been identified, and the composition and stability constants of the Fe (III) complex with gossypolacetic acid have been determined.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.321-328
• /
• 2019

A new miniaturized all solid-state contact Fe (III)-selective PVC membrane electrode based on Fe (II) phthalocyanine as a neutral carrier was described. The effects of the membrane composition and foreign ions on the electrode performance was investigated. The best performance was obtained with a membrane containing 32% poly (vinyl chloride), 64% dioctylsebacate, 3% Fe (II) phthalocyanine, and 1% potassium tetrakis (p-chlorophenyl) borate. The electrode showed near Nernstian response of $26.04{\pm}0.95mV/decade$ over the wide linear concentration range $1.0{\times}10^{-6}$ to $1.0{\times}10^{-1}M$, and a very low limit of detection $1.8{\pm}0.5{\times}10^{-7}M$. The potentiometric response of the developed electrode was independent at pH 3.5-5.7. The lifetime of the electrode was approximately 3 months and the response time was very short (< 7 s). It exhibited excellent selectivity towards Fe (III) over various cations. The miniaturized all solid-state contact Fe (III)-selective membrane electrode was successfully applied as an indicator electrode for the potentiometric titration of $1.0{\times}10^{-3}M$ Fe (III) ions with a $1.0{\times}10^{-2}M$ EDTA and the direct determination of Fe (III) ions in real water samples.

• Preventive Nutrition and Food Science
• /
• 제6권2호
• /
• pp.83-86
• /
• 2001

The autoxidation reaction of L-ascorbic acid(AsA), and, particularly, the oxidation rates of AsA in the presence of Fe(III) or Cu(II) ions were determined in water and methanol. UV spectral measurement (at 265 nm) and HPLC were used to determine the remaining amounts of AsA in water and methanol, respectively. It was found that, in the presence of metal ions, the autoxidation rate of AsA was significantly affected by the kinds of solvents used, and also by the kinds of metal ions present. Moreover, the first-order rate constants for the oxidation of non-dissociated AsA compared with dissociated-AsA were investigated. It was confirmed that the oxidation of AsA was more accelerated in the dissociated form of AsA than in the non-dissociated form of AsA in either with Fe(III) or Cu(II). It was also found that the Cu(II) at a concentration of 0.1 $\mu$M had a more significant effect on the first-order rate constants for the autoxidation of AsA than Fe(III) at 5 $\mu$M.

• 대한화학회지
• /
• 제54권5호
• /
• pp.533-540
• /
• 2010

활성탄소를 가지고 수용액으로부터 전이금속이온을 제거 능력에 대해 시험했다. 탄소의 물리적, 화학적 그리고 액체-상 흡착 특징은 다음의 기준 절차로 수행하였다. Ni(II), Cu(II) 그리고 Fe(III)이온의 제거 연구는 흡착물질의 양, 금속이온 용액의 pH, 배치 모드에서 시간을 다양하게 하여 시도되었다. 평균 흡착 데이터는 Freundlich와 Langmuir로 맞춰졌고 등온 상수는 계산되었다. 다른 세가지 금속 이온의 평균 시간은 결정되었다. pH는 흡착에 있어서 중요한 역할을 하는 것을 발견했다. 이 과정은 흡열반응이었고, 열역학 인자는 계산되었다. 흡착 연구는 이온교환 메커니즘이 작용되는 것을 나타내고 있다.

• 대한화학회지
• /
• 제68권3호
• /
• pp.139-145
• /
• 2024

This study aims to elucidate the mechanism involved in the hydrolysis of the hexacyanoferrate(III) complex ion (Fe(CN)₆^3-) and the mechanism leading to the formation of Prussian blue (Fe^III₄[Fe_II(CN)₆]₃·xH₂O, PB) in acidic aqueous solutions at moderately elevated temperatures. Hydrolysis constitutes a crucial step in generating PB through the widely used single-source or precursor method. Recent PB syntheses predominantly rely on the single-source method, where hexacyanoferrate(II/III) is the exclusive reactant, as opposed to the co-precipitation method employing bare metal ions and hexacyanometalate ions. Despite the widespread adoption of the single-source method, mechanistic exploration remains largely unexplored and speculative. Utilizing UV-vis spectrophotometry, negative-ion mode liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS), and a devised reaction, this study identifies crucial intermediates, including aqueous Fe^2+/3+ ions and hydrocyanic acid (HCN) in the solution. These two intermediates eventually combine to form thermodynamically stable PB. The findings presented in this research significantly contribute to understanding the fundamental mechanism underlying the acid-catalyzed hydrolysis of the hexacyanoferrate(III) complex ion and the subsequent formation of PB, as proposed in the sequential mechanism introduced herein. This finding might contribute to the cost-effective synthesis of PB by incorporating diverse metal ions and potassium cyanide.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3617-3622
• /
• 2010

The reaction of stoichiometric amount of $FeCl_2{\cdot}4H_2O$, (2-pyridylmethyl, 3-pyridylmethyl)amine (2,3-pyma) and sodium azide/sodium thiocyanate in methanol under aerobic conditions affords the dinuclear Fe(III) complexes, [(2,3-pyma) $(N_3)_2Fe({\mu}-OCH_3)_2Fe(N_3)_2$(2,3-pyma)]${\cdot}CH_3OH$ (1) and [(2,3-pyma)$(NCS)_2Fe({\mu}-OCH_3)_2Fe(NCS)_2$(2,3-pyma)] (2) in good yield. Two bis-methoxy-bridged diiron(III) complexes are isolated and characterized. The coordination geometries around iron(III) ions in 1 and 2 are the same tetragonally distorted octahedron. The iron(III) ions are coordinated by two nitrogens of a 2,3-pyma, two nitrogens of two azide/thiocyanate ions, and two oxygens of two methoxy groups. Both compounds are isomorphous. The structures of 1 and 2 display the C-$H{\cdots}\pi$ and/or $\pi-\pi$ stacking interactions as well as hydrogen bonding interactions, respectively. Compounds 1 and 2 show significant antiferromagnetic couplings through the bridged methoxy groups between the iron(III) ions in the temperature range from 5 to 300 K ($H=-2JS_1{\cdot}S_2$, J=-19.1 and $-13.9\;cm^{-1}$ for 1 and 2).

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1976-1980
• /
• 2010

A simple and reliable method has been developed to selectively separate and concentrate trace amounts of Fe(III) ions from water and food samples by using flame atomic absorption spectrometry. A new reagent, 5-hydroxy-4-ethyl-5,6-di-pyridin-2-yl-4,5-dihydro-2H-[1,2,4] triazine-3-thione, was synthesized and characterized by using FT-IR spectroscopy and elemental analysis. Effects of pH, concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of Fe(III) were investigated. The optimum pH was found to be 5. Eluent for quantitative elution was 10 mL of 2 M HCl. The preconcentration factor of the method, detection limit (3s/b, ${\mu}gL^{-1}$) and relative standard deviation values were found to be 25, 4.59 and 1%, respectively. In order to verify the accuracy of the method, two certified reference materials (TMDA 54.4 lake water and SRM 1568a rice flour) were analyzed. The results obtained were in good agreement with the certified values. The method was successfully applied to the determination of Fe(III) ions in water and food samples.

• 대한화학회지
• /
• 제20권1호
• /
• pp.35-42
• /
• 1976

사면체 구조를 갖는 철(III)-옥살산 착화합물 5개와 팔면체 구조를 갖는 착화합물을 3개를 합성한 후 화학분석과 적외선스펙트럼을 이용하여 이들 착이온의 구조에 관하여 연구하였다. 이들중 $[FeC_2O_4Br_2]^-,$ $[FeC_2O_4(NCS)_4]^{3-}$ 및 $[Fe_2(C_2O_4)_3Cl_4]^{4-}$등의 3개의 피리딘염은 아직 보고되지 않은 새로운 착물이며, 특히 이합체로 생각되는 착물 $(PyH)_4[Fe_2(C_2O_4)_3Cl_4]$는 광화학 반응성이 아주 큼을 알 수 있었다. 이들 여러 철(III)-옥살산 착물의 물전기전도도와 자기화율에 관한 측정결과도 함께 보고하였다.

• 한국광물학회지
• /
• 제20권2호
• /
• pp.125-134
• /
• 2007

본 연구에서는 석탄 광산배수에 함유된 중금속을 부유선별로 제거하기에 앞서 부유선별 조건에 영향을 미치는 철, 망간, 알루미늄 이온의 침전특성을 알아보았다. Fe(III), Mn(II), Al(III) 이온을 NaOH와 반응시켜 1 h 동안 침전시키면 Fe(III)은 pH 5.0 이상에서, Mn(II)은 pH 10.0 이상에서 그리고 Al(III)은 pH $6.0{\sim}9.0$의 범위에서 대부분 침전되어 여액에 $1.0mgL^{-1}$ 이하로 잔류되었다. Fe(III), Mn(II), Al(III)의 혼합 용액에 포수제인 올레인산나트륨을 첨가하였을 경우, 각각의 중금속 이온은 올레인산나트륨과 반응하여 불용성 염을 거의 형성하지 않았기 때문에 침전 부선법으로 광산배수에 함유된 중금속을 제거해야 하는 것으로 나타났다.

• 방사성폐기물학회지
• /
• 제16권4호
• /
• pp.421-429
• /
• 2018

본 연구에서는 하이드라진 기조의 환원성 제염제를 이용한 마그네타이트 산화물의 용해를 다루고 있다. 마그네타이트로부터의 Fe(II) 및 Fe(III)의 용해는 protonation, surface complexation 및 reduction에 의해 지배를 받는다. 하이드라진과 황산은 산소결합을 파괴하거나 Fe(III)이온을 Fe(II)이온으로 환원시키기 위한 수소 및 전자를 각각 제공하게 된다. 속도론적 관점에서 보다 효율적인 용해를 위하여 다수의 전이금속의 영향을 분석하여 Cu(II) 이온이 효과적임을 확인한 바 있다. Cu(I) 이온은 Cu(II) 이온으로 산화되는 동안 전자를 방출하여 Fe(III) 이온을 환원시키고 다시 하이드라진에 의해 Cu(I) 이온으로 환원되게 된다. 본 연구를 통해 제염용액에 매우 적은 양의 구리 이온 (약 0.5 mM)을 첨가함에 따라 평균 40% 용해속도가 향상됨을 확인하였고, 특히 특정 조건에서는 70% 이상 용해속도가 향상 됨을 확인하였다. 구리 이온이 하이드라진과 배위결합을 이루는 지에 대해서는 아직 명확하지 않으나, 분명한 것은 $Cu(II)/H^+/N_2H_4$으로 이루어진 제염제는 효과적인 용해성능을 가지고 있다는 것이다.